Re: HDIO_SET_DMA failed: with nforce2 board

[Bartlomiej Zolnierkiewicz]

On Sunday 15 of February 2004 10:18, mike@xxxxxxxxxx wrote:
> > On Monday 17 of May 2004 13:39, Mike Kordik wrote:
> >> On Mon, 2004-05-17 at 07:13, Bartlomiej Zolnierkiewicz wrote:
> >> > On Monday 17 of May 2004 04:15, Mike wrote:
> >> > > I have an nforce2 based board and I cannot enable dma.
> >> >
> >> > 'dmesg' output, please
> >>
> >> I posted using PAN and I am trying to respond with PAM but todays posts
> >> and some of yesterdays are not showing up. I do not know what the
> >> problem is but I apologize for responding this way. Here is my dmesg
> >> output:
> >
> > OK, thanks.
> >
> >> Linux version 2.6.4-rc1-mm1 (root@cdimage) (gcc version 3.3.3 20040217
> >> (Gentoo Linux 3.3.3, propolice-3.3-7)) #3 Mon May 17 00:17:40 EDT 2004
> >
> > ...
> >
> >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> >> ide: Assuming 33MHz system bus speed for PIO modes; override with
> >> idebus=xx
> >> pnp: the driver 'ide' has been registered
> >> hda: Maxtor 6Y120L0, ATA DISK drive
> >> hdb: WDC WD1600BB-00HTA0, ATA DISK drive
> >> hdc: MATSHITADVD-ROM SR-8582, ATAPI CD/DVD-ROM drive
> >> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >> ide1 at 0x170-0x177,0x376 on irq 15
> >
> > AMD/nVidia IDE driver didn't recognize the controller
> > (or driver wasn't compiled in for some reason).
> >
> > I need full .config and 'lspci -vvv' output to know more.
> >
> > Bartlomiej
>
> Bartlomiej,
>      Thank you for your help!
>
> I double checked my boot partition to make sure I actually had copied over
> the latest kernel I had compiled and it has the right date and time stamp
> on it.
>
> The info you requessted.
>
> .config:

Weird, everything looks OK.  Can you retest with vanilla 2.6.4-rc1?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/