Re: HDIO_SET_DMA failed: with nforce2 board

[Bartlomiej Zolnierkiewicz]

On Monday 17 of May 2004 13:39, Mike Kordik wrote:
> On Mon, 2004-05-17 at 07:13, Bartlomiej Zolnierkiewicz wrote:
> > On Monday 17 of May 2004 04:15, Mike wrote:
> > > I have an nforce2 based board and I cannot enable dma.
> >
> > 'dmesg' output, please
>
> I posted using PAN and I am trying to respond with PAM but todays posts
> and some of yesterdays are not showing up. I do not know what the
> problem is but I apologize for responding this way. Here is my dmesg
> output:

OK, thanks.

> Linux version 2.6.4-rc1-mm1 (root@cdimage) (gcc version 3.3.3 20040217
> (Gentoo Linux 3.3.3, propolice-3.3-7)) #3 Mon May 17 00:17:40 EDT 2004

...

> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> pnp: the driver 'ide' has been registered
> hda: Maxtor 6Y120L0, ATA DISK drive
> hdb: WDC WD1600BB-00HTA0, ATA DISK drive
> hdc: MATSHITADVD-ROM SR-8582, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15

AMD/nVidia IDE driver didn't recognize the controller
(or driver wasn't compiled in for some reason).

I need full .config and 'lspci -vvv' output to know more.

Bartlomiej

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/