Re: [PATCH] SIS AGP clean up, blacklist and module options
From: Heilmann, Oliver
Date: Mon Apr 26 2004 - 04:33:20 EST
> From: Andrew Morton <akpm@xxxxxxxx>
> To: Oliver Heilmann <heilmano@xxxxxxxxx>
> Subject: Re: [PATCH] SIS AGP clean up, blacklist and module options
> Date: Sun, 25 Apr 2004 22:05:51 -0700
>
> Oliver Heilmann <heilmano@xxxxxxxxx> wrote:
> >
> > Sorry, I'm not used to using yahoo webmail. It
> > stupidly wrapped all the lines. Patch vs 2.6.5. is
> > attached.
>
> Generates several non-trivial rejects against the current kernel.
>
> Please update the patch and resend both the patch and the description
of
> the changes which it makes, thanks.
>
> (Patches in `patch -p1' format are preferred, btw).
Mildly embarrassed. Sorry about wasting everybody's time.
Btw. Documentation/SubmittingPatches seems to suggest -p0, At least for
single file patches.
Anyway, here it is again (tested and -p1):
* renamed sis_648_enable to sis_delayed_enable and removed chipset
references
* All chipsets that require the sis delay-hack are listed in
sis_broken_chipsets (and no other place).
* There are two new module options to force agp3-spec compliant
initialisation and/or the delay hack. As I only have a 648FX chipset to
test on, I figured this might be useful to experiment with on other
chipsets (i.e.746[FX]).
Basically, if you have an SiS chipset and your machine freezes when you
start X, try the -agp_sis_force_delay=1 option. If this fixes your
problem add your PCI ID to sis_broken_chipsets in sis-agp.c
Note to 746[FX] people: I'm still not sure what the differences between
the two 746 versions and the 648 series are. If this patch does not work
for you try playing with the agp_sis_agp_spec module option. Any
feedback is greatly appreciated.
Oliver
--- linux-2.6.5/drivers/char/agp/sis-agp.c.orig 2004-04-04 04:36:16.000000000 +0100
+++ linux-2.6.5/drivers/char/agp/sis-agp.c 2004-04-26 09:13:03.000000000 +0100
@@ -13,6 +13,8 @@
#define SIS_TLBCNTRL 0x97
#define SIS_TLBFLUSH 0x98
+static int __devinitdata agp_sis_force_delay = 0;
+static int __devinitdata agp_sis_agp_spec = -1;
static int sis_fetch_size(void)
{
@@ -67,7 +69,7 @@ static void sis_cleanup(void)
(previous_size->size_value & ~(0x03)));
}
-static void sis_648_enable(u32 mode)
+static void sis_delayed_enable(u32 mode)
{
struct pci_dev *device = NULL;
u32 command;
@@ -93,10 +95,13 @@ static void sis_648_enable(u32 mode)
pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
- if(device->device == PCI_DEVICE_ID_SI_648) {
- // weird: on 648 and 648fx chipsets any rate change in the target command register
- // triggers a 5ms screwup during which the master cannot be configured
- printk(KERN_INFO PFX "sis 648 agp fix - giving bridge time to recover\n");
+ /*
+ * Weird: on some sis chipsets any rate change in the target
+ * command register triggers a 5ms screwup during which the master
+ * cannot be configured
+ */
+ if (device->device == agp_bridge->dev->device) {
+ printk(KERN_INFO PFX "SiS delay workaround: giving bridge time to recover.\n");
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout (1+(HZ*10)/1000);
}
@@ -219,21 +224,35 @@ static struct agp_device_ids sis_agp_dev
};
+// chipsets that require the 'delay hack'
+static int sis_broken_chipsets[] __devinitdata = {
+ PCI_DEVICE_ID_SI_648,
+ PCI_DEVICE_ID_SI_746,
+ 0 // terminator
+};
+
static void __devinit sis_get_driver(struct agp_bridge_data *bridge)
{
- if (bridge->dev->device == PCI_DEVICE_ID_SI_648) {
- if (agp_bridge->major_version == 3 && agp_bridge->minor_version < 5) {
- sis_driver.agp_enable=sis_648_enable;
- } else {
- sis_driver.agp_enable = sis_648_enable;
- sis_driver.aperture_sizes = agp3_generic_sizes;
- sis_driver.size_type = U16_APER_SIZE;
- sis_driver.num_aperture_sizes = AGP_GENERIC_SIZES_ENTRIES;
- sis_driver.configure = agp3_generic_configure;
- sis_driver.fetch_size = agp3_generic_fetch_size;
- sis_driver.cleanup = agp3_generic_cleanup;
- sis_driver.tlb_flush = agp3_generic_tlbflush;
- }
+ int i;
+
+ for(i=0; sis_broken_chipsets[i]!=0; ++i)
+ if(bridge->dev->device==sis_broken_chipsets[i])
+ break;
+
+ if(sis_broken_chipsets[i] || agp_sis_force_delay)
+ sis_driver.agp_enable=sis_delayed_enable;
+
+ // sis chipsets that indicate less than agp3.5
+ // are not actually fully agp3 compliant
+ if ((agp_bridge->major_version == 3 && agp_bridge->minor_version >= 5
+ && agp_sis_agp_spec!=0) || agp_sis_agp_spec==1) {
+ sis_driver.aperture_sizes = agp3_generic_sizes;
+ sis_driver.size_type = U16_APER_SIZE;
+ sis_driver.num_aperture_sizes = AGP_GENERIC_SIZES_ENTRIES;
+ sis_driver.configure = agp3_generic_configure;
+ sis_driver.fetch_size = agp3_generic_fetch_size;
+ sis_driver.cleanup = agp3_generic_cleanup;
+ sis_driver.tlb_flush = agp3_generic_tlbflush;
}
}
@@ -324,4 +343,8 @@ static void __exit agp_sis_cleanup(void)
module_init(agp_sis_init);
module_exit(agp_sis_cleanup);
+MODULE_PARM(agp_sis_force_delay,"i");
+MODULE_PARM_DESC(agp_sis_force_delay,"forces sis delay hack");
+MODULE_PARM(agp_sis_agp_spec,"i");
+MODULE_PARM_DESC(agp_sis_agp_spec,"0=force sis init, 1=force generic agp3 init, default: autodetect");
MODULE_LICENSE("GPL and additional rights");
--------------------------------------------------------------------------------
The information contained herein is confidential and is intended solely for the
addressee. Access by any other party is unauthorised without the express
written permission of the sender. If you are not the intended recipient, please
contact the sender either via the company switchboard on +44 (0)20 7623 8000, or
via e-mail return. If you have received this e-mail in error or wish to read our
e-mail disclaimer statement and monitoring policy, please refer to
http://www.drkw.com/disc/email/ or contact the sender.
--------------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/