Re: File system compression, not at the block layer

[Willy Tarreau]

On Sat, Apr 24, 2004 at 11:05:05PM -0400, Horst von Brand wrote:
 
> >                             Haven't you noticed that drives with many
> > platters are always faster than their cousins with fewer platters ? And
> > I don't speak about access time, but about sequential reads.
> 
> Have you ever wondered how they squeeze 16 or more platters into that slim
> enclosure? If you take them apart, the question evaporates: There are 2 or
> 3 platters in them, no more. The "many platters" are an artifact of BIOS'
> "disk geometry" description.

I know, I was speaking about physical platters of course. Mark Hann told
me in private that he disagreed with me, so I checked recent disks 
(36, 73, 147 GB SCSI with 1, 2, 4 platters) and he was right, they have
exactly the same spec concerning speed. But I said that I remember the
times when I regularly did this test on disks that I was integrating about
7-8 years ago, they were 2.1, 4.3, 6.4 GB (1,2,3 platters), and I'm fairly
certain that the 1-platter performed at about 5 MB/s while the 6.4 was around
12 MB/s. BTW, the 9GB SCSI I have in my PC does about 28 MB/s for 1 platter,
while its 18 GB equivalent (2 platters) does about 51. So I think that what
I observed remained true for such capacities, but changed on bigger disks
because of mechanical constraints. Afterall, what's 18 GB now ? Less than
one twentieth of the biggest disk.

Anyway, this is off-topic, so that's my last post on LKML on the subject.

Regards,
Willy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/