Re: Sensors (W83627HF) in Tyan S2882

[Fabian Fenaut]

Jan Kasprzak a écrit le 19.04.2004 14:01:
> I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip is
> Winbond w83627hf according to the mainboard documentation.  The w83627hf 
> driver can read values from the sensors, but apparently not all values. The
> board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four
> chassis fans). BIOS displays the fan status correctly for all fans, so all
> fans are connected to the sensors chip. However, there are only three fans
> listed in /sys/devices/platform/i2c-1/1-0290.


Probably unrelated to your problem, but isn't there a typo in 
drivers/i2c/chips/Kconfig ? maybe patch below ?

--
Fabian


diff -Nru drivers/i2c/chips/Kconfig.orig drivers/i2c/chips/Kconfig
--- drivers/i2c/chips/Kconfig.orig      Fri Apr 16 11:12:17 2004
+++ drivers/i2c/chips/Kconfig   Mon Apr 19 15:23:48 2004
@@ -158,7 +158,7 @@
          will be called via686a.

 config SENSORS_W83781D
-       tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+       tristate "Winbond W83781D, W83782D, W83783S, W83682HF, Asus AS99127F"
        depends on I2C && EXPERIMENTAL
        select I2C_SENSOR
        help

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/