Re: [sata] libata update

[Jarno Paananen]

Jeff Garzik <jgarzik@xxxxxxxxx> writes:

> Petr Sebor wrote:
>> Hi Jeff,
>> I have upgraded from 2.6.3 to 2.6.5-rc3 and can't see the secondary
>> sata drive anymore...
>
> Does this patch fix it?

I'm using the 2.4 kernel version (would be using 2.6 if there was
support for IT8212 ide-"raid" controller, hint hint Bart :) and had
the same problem. This fixed it:

libata version 1.02 loaded.
sata_via version 0.20
sata_via(00:0f.0): routed to hard irq line 5
ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 20
ata2: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 20
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3e01
87:4003 88:407f
ata1: dev 0 ATA, max UDMA/133, 72303840 sectors (lba48)
ata1: dev 0 configured for UDMA/133
ata2: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3e01
87:4003 88:203f
ata2: dev 0 ATA, max UDMA/100, 488397168 sectors (lba48)
ata2: dev 0 configured for UDMA/100
scsi1 : sata_via
scsi2 : sata_via
  Vendor: ATA       Model: WDC WD360GD-00FN  Rev: 1.02
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: WDC WD2500JD-22F  Rev: 1.02
  Type:   Direct-Access                      ANSI SCSI revision: 05
Attached scsi disk sda at scsi0, channel 0, id 3, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB)
 sdb: sdb1
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
 sdc: sdc1 < sdc5 sdc6 >

(sda is a real SCSI disk)

Thanks,

// Jarno
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/