Re: PROBLEM: alim15x3 later than 2.6.1 won't allow DMA to be turnedon

From: Dave Croal
Date: Thu Mar 18 2004 - 09:33:17 EST




Bartlomiej Zolnierkiewicz wrote:
On Thursday 18 of March 2004 03:19, Dave Croal wrote:

The alim15x3 module in kernels 2.6.3 and 2.6.4 does not allow me to turn
on DMA via hdparm:

hdparm -d1 /dev/hda
HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off)

dmesg |grep -i ali
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
ALI15X3: port 0x01f0 already claimed by ide0
ALI15X3: port 0x0170 already claimed by ide1
ALI15X3: neither IDE port enabled (BIOS)

---

In kernel 2.6.1 it worked OK:

hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
using_dma = 1 (on)

dmesg |grep -i ali
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x78c0-0x78c7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x78c8-0x78cf, BIOS settings: hdc:DMA, hdd:pio
ide0: I/O resource 0x3F6-0x3F6 not free.
hda: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 3 for ide0
ide1: I/O resource 0x376-0x376 not free.
hdc: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 22 for ide1
Module alim15x3 cannot be unloaded due to unsafe usage in
include/linux/module.h:483


These are errors - ide0 and ide1 are already used by generic IDE driver.
It was fixed in 2.6.2 but side-effect of the fix is that you must make sure
that ide_generic driver is not compiled in or loaded if it's modular.

Please make sure CONFIG_IDE_GENERIC is 'n' in your .config.

Regards,
Bartlomiej



That worked, I am happily using DMA with alim15x3 on 2.6.4 now. Thank you for your help.

Dave Croal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/