Re: PPC KGDB changes and some help?
From: George Anzinger
Date: Mon Jan 26 2004 - 16:29:11 EST
Tom Rini wrote:
On Fri, Jan 23, 2004 at 03:38:39PM -0800, George Anzinger wrote:
Tom Rini wrote:
On Thu, Jan 22, 2004 at 11:05:55AM -0700, Tom Rini wrote:
[snip]
First up:
We need to call flush_instruction_cache() on a 'c' or 's' command.
arch/ppc/kernel/ppc-stub.c | 19 ++++++-------------
1 files changed, 6 insertions(+), 13 deletions(-)
On tpo of this patch, there's the following:
Put back some code to figure out what signal we're dealing with.
arch/ppc/kernel/ppc-stub.c | 63
++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 60 insertions(+), 3 deletions(-)
--- 1.15/arch/ppc/kernel/ppc-stub.c Thu Jan 22 10:53:06 2004
+++ edited/arch/ppc/kernel/ppc-stub.c Fri Jan 23 15:43:10 2004
@@ -3,6 +3,7 @@
*
* PowerPC-specific bits to work with the common KGDB stub.
*
+ * 1998 (c) Michael AK Tesch (tesch@xxxxxxxxxxx)
* 2003 (c) TimeSys Corporation
* 2004 (c) MontaVista Software, Inc.
* This file is licensed under the terms of the GNU General Public License
@@ -19,13 +20,69 @@
#include <asm/processor.h>
#include <asm/machdep.h>
+/* Convert the hardware trap type code to a unix signal number. */
+/*
+ * This table contains the mapping between PowerPC hardware trap types,
and
+ * signals, which are primarily what GDB understands.
+ */
+static struct hard_trap_info
+{
+ unsigned int tt; /* Trap type code for powerpc */
+ unsigned char signo; /* Signal that we map this trap into
*/
+} hard_trap_info[] = {
+#if defined(CONFIG_40x)
+ { 0x100, SIGINT }, /* critical input interrupt */
+ { 0x200, SIGSEGV }, /* machine check */
+ { 0x300, SIGSEGV }, /* data storage */
+ { 0x400, SIGBUS }, /* instruction storage */
+ { 0x500, SIGINT }, /* interrupt */
+ { 0x600, SIGBUS }, /* alignment */
+ { 0x700, SIGILL }, /* program */
+ { 0x800, SIGILL }, /* reserved */
+ { 0x900, SIGILL }, /* reserved */
+ { 0xa00, SIGILL }, /* reserved */
+ { 0xb00, SIGILL }, /* reserved */
+ { 0xc00, SIGCHLD }, /* syscall */
+ { 0xd00, SIGILL }, /* reserved */
+ { 0xe00, SIGILL }, /* reserved */
+ { 0xf00, SIGILL }, /* reserved */
+ { 0x2000, SIGTRAP}, /* debug */
+#else
+ { 0x200, SIGSEGV }, /* machine check */
+ { 0x300, SIGSEGV }, /* address error (store) */
+ { 0x400, SIGBUS }, /* instruction bus error */
+ { 0x500, SIGINT }, /* interrupt */
+ { 0x600, SIGBUS }, /* alingment */
+ { 0x700, SIGTRAP }, /* breakpoint trap */
+ { 0x800, SIGFPE }, /* fpu unavail */
+ { 0x900, SIGALRM }, /* decrementer */
+ { 0xa00, SIGILL }, /* reserved */
+ { 0xb00, SIGILL }, /* reserved */
+ { 0xc00, SIGCHLD }, /* syscall */
+ { 0xd00, SIGTRAP }, /* single-step/watch */
+ { 0xe00, SIGFPE }, /* fp assist */
+#endif
+ { 0, 0} /* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+ struct hard_trap_info *ht;
+
+ for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+ if (ht->tt == tt)
+ return ht->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
/*
* Routines
*/
static void
kgdb_debugger(struct pt_regs *regs)
{
- (*linux_debug_hook) (0, 0, 0, regs);
+ (*linux_debug_hook) (0, computeSignal(regs->trap), 0, regs);
return;
}
@@ -52,14 +109,14 @@
int
kgdb_iabr_match(struct pt_regs *regs)
{
- (*linux_debug_hook) (0, 0, 0, regs);
+ (*linux_debug_hook) (0, computeSignal(regs->trap), 0, regs);
return 1;
}
int
kgdb_dabr_match(struct pt_regs *regs)
{
- (*linux_debug_hook) (0, 0, 0, regs);
+ (*linux_debug_hook) (0, computeSignal(regs->trap), 0, regs);
return 1;
}
Now, not being as well versed in all of the debugging infos that can be
passed around, it sounds like this patch could be dropped in the future
for a cleaner method using some of the dwarf2 bits being talked about.
But I don't know, and clarification and pointers (if so) to how to do
this would be appreciated.
I am not sure what this buys you. I don't think dwarf2 will help here.
OK.
There is a real danger of passing signal info back to gdb as it will want
to try to deliver the signal which is a non-compute in most kgdbs in the
field. I did put code in the mm-kgdb to do just this, but usually the
arrival of such a signal (other than SIGTRAP) is the end of the kernel.
All that is left is to read the tea leaves.
The gdb I've been testing this with knows better than to try and send a
singal back, so that's not a worry. The motivation behind doing this
however is along the lines of "if it ain't broke, don't remove it". The
original stub was getting all of this information correctly, so why stop
doing it?
OK, but I still don't like losing the return address. Tell me again, why do you
need three different functions all doing the same thing?
--
George Anzinger george@xxxxxxxxxx
High-res-timers: http://sourceforge.net/projects/high-res-timers/
Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/