UPDATE PROBLEM: pc hangs after cdrdao read-toc icotl on ATAPI2.6.1-rc3 (not a bug)
From: CBke
Date: Sat Jan 10 2004 - 11:57:42 EST
hi,
I found the problem : setting of hdparm in startup scripts.
with normal configuration (no hdparm) the problem does not occure.
Due to an update of hdparm (gentoo) the settings
-d1 -c3 -X udma2 -M 245
where applied to all the devices, including the two CD-roms, which was not the intention.
After removing the -X udma2 setting for the CD-rom's all went fine again.
So actually this was not a bug.
Greetings,
CBke
PS : the kernel parameters were:
cat /proc/cmdline
hda=autotune hdc=autotune hdd=autotune root=/dev/hda2 vga=0x318 badram=0x0009269c,0xfffffffc video=vesa:mtrr,ypan:1280x1024-32@87 vga=0x318
On Fri, 9 Jan 2004 17:05:00 +0100
CBke <cb@xxxxxxxx> wrote:
> Linux CBke 2.6.1-rc3 #1 Fri Jan 9 04:46:10 CET 2004 i686 AMD Athlon(tm) processor AuthenticAMD GNU/Linux
>
> Gnu C 3.3.2
> Gnu make 3.80
> util-linux 2.12
> mount 2.12
> module-init-tools 3.0-pre5
> e2fsprogs 1.34
> Linux C Library 2.3.2
> Dynamic linker (ldd) 2.3.2
> Procps 3.1.15
> Net-tools 1.60
> Kbd 1.08
> Sh-utils 5.0.91
> Modules Loaded nvidia
>
> pc hangs after cdrdao read-toc icotl on ATAPI
>
> after performing cdrdao read-toc --driver generic-mmc --device /dev/hdd test.toc (as root) the pc hangs (not the case with 2.4.22)
>
> cat /proc/version
> Linux version 2.6.1-rc3 (root@CBke) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 Fri Jan 9 04:46:10 CET 2004
>
> I used a self written cd (16 tracks AUDIO) and tested it on hdd: "ATAPI 48X CD-ROM drive, 128kB Cache, DMA"
>
> the log from strace:
>
> open("/dev/hdd", O_RDONLY|O_NOBLOCK) = 3
> ioctl(3, 0x2202, 0) =0
> close(3)
> open("/dev/hdd", O_RDWR|O_NONBLOCK) = 3
> fcntl64(3, F_GETFL) = 0x8802 (flags O_RDWR|O_NOBLOCK|O_LARGEFILE)
> fcnt64(3, F_SETFL, O_RDWR|O_LARGEFILE) = 0
> ioctl(3, 0x5382 0xbffff3d0) = 0
> ioctl(3, 0x5386 0xbffff3cc) = 0
> ioctl(3, 0x2282 0xbffff3d4) = 0
> ioctl(3, 0x5382 0xbffff370) = 0
> ioctl(3, 0x5386 0xbffff36c) = 0
> ioctl(3, 0x2201 0xbffff264) = 0
> fstat64(3, {st_mode=SIFBLK|0600,st_rdev=makedev(22,64,...}) = 0
> ioctl(3, 0x2272, 0xbffff5c8 ) = 0
> ioctl(3, 0x2275, 0xbffff5c4 ) = 0
> ioctl(3, 0x2272, 0xbffff5c4 ) = 0
> ioctl(3, 0x2272, 0xbffff5c8 ) = 0
> ioctl(3, 0x2272, 0xbffff5c4 ) = 0
> write(2 "Using libscg version shily_0.7) = 33
> gettimeofday({1073656327, 811541}, NULL) = 0
> ioctl(3, 0x2285
>
> and there it stopped. I wrote this down on a peice of paper.
>
> This happend everytime single time.
> my dmesg :
>
> Linux version 2.6.1-rc3 (root@CBke) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 Fri Jan 9 04:46:10 CET 2004
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 255MB LOWMEM available.
> On node 0 totalpages: 65520
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 61424 pages, LIFO batch:14
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 VT8371 ) @ 0x000f7900
> ACPI: RSDT (v001 VT8371 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
> ACPI: FADT (v001 VT8371 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
> ACPI: DSDT (v001 VT8371 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
> Building zonelist for node : 0
> Kernel command line: hda=autotune hdc=autotune hdd=autotune root=/dev/hda2 vga=0x318 badram=0x0009269c,0xfffffffc video=vesa:mtrr,ypan:1280x1024-32@87 vga=0x318
> ide_setup: hda=autotune
> ide_setup: hdc=autotune
> ide_setup: hdd=autotune
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> PID hash table entries: 1024 (order 10: 8192 bytes)
> Detected 1200.617 MHz processor.
> Using tsc for high-res timesource
> Console: colour dummy device 80x25
> Memory: 254424k/262080k available (2784k kernel code, 6936k reserved, 849k data, 356k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay loop... 2359.29 BogoMIPS
> Security Scaffold v1.0.0 initialized
> Capability LSM initialized
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
> CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: AMD Athlon(tm) processor stepping 02
> Enabling fast FPU save and restore... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1199.0863 MHz.
> ..... host bus clock speed is 199.0977 MHz.
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20031002
> spurious 8259A interrupt: IRQ7.
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
> drivers/usb/core/usb.c: registered new driver usbfs
> drivers/usb/core/usb.c: registered new driver hub
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> PCI: Using ACPI for IRQ routing
> PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
> vesafb: framebuffer at 0xe4000000, mapped to 0xd0806000, size 16384k
> vesafb: mode is 1024x768x32, linelength=4096, pages=0
> vesafb: protected mode interface info at c000:0393
> vesafb: scrolling: redraw
> vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
> fb0: VESA VGA frame buffer device
> Machine check exception polling timer started.
> ikconfig 0.7 with /proc/config*
> devfs: v1.22 (20021013) Richard Gooch (rgooch@xxxxxxxxxxxxx)
> devfs: devfs_debug: 0x0
> devfs: boot_options: 0x1
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> NTFS driver 2.1.5 [Flags: R/O].
> udf: registering filesystem
> Initializing Cryptographic API
> Applying VIA southbridge workaround.
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
> Console: switching to colour frame buffer device 128x48
> pty: 256 Unix98 ptys configured
> request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
> lp: driver loaded but no devices found
> Real Time Clock Driver v1.12
> Non-volatile memory driver v1.2
> ipmi: message handler initialized
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> parport0: PC-style at 0x378 [PCSPP,EPP]
> parport0: cpp_daisy: aa5500ff(98)
> parport0: assign_addrs: aa5500ff(98)
> parport0: Printer, HEWLETT-PACKARD DESKJET 600
> lp0: using parport0 (polling).
> parport_pc: Via 686A parallel port: io=0x378
> loop: loaded (max 8 devices)
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 0000:00:0d.0: 3Com PCI 3c905C Tornado at 0xe000. Vers LK1.1.19
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:07.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: Maxtor 5T040H4, ATA DISK drive
> Using anticipatory io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
> hdd: CD-ROM 48X/AKU, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: Host Protected Area detected.
> current capacity is 66055248 sectors (33820 MB)
> native capacity is 80043264 sectors (40982 MB)
> hda: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=65531/16/63, UDMA(100)
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
> hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
> ide-floppy driver 0.99.newide
> Console: switching to colour frame buffer device 128x48
> drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
> uhci_hcd 0000:00:07.2: UHCI Host Controller
> uhci_hcd 0000:00:07.2: irq 5, io base 0000d400
> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> uhci_hcd 0000:00:07.3: UHCI Host Controller
> uhci_hcd 0000:00:07.3: irq 5, io base 0000d800
> uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> drivers/usb/core/usb.c: registered new driver hid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
> request_module: failed /sbin/modprobe -- snd-card-0. error = -16
> ALSA device list:
> #0: Ensoniq AudioPCI ENS1371 at 0xdc00, irq 12
> oprofile: using NMI interrupt.
> NET: Registered protocol family 2
> IP: routing cache hash table of 2048 buckets, 16Kbytes
> TCP: Hash tables configured (established 16384 bind 32768)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> BIOS EDD facility v0.10 2003-Oct-11, 1 devices found
> Please report your BIOS at http://domsch.com/linux/edd30/results.html
> found reiserfs format "3.6" with standard journal
> hub 1-0:1.0: new USB device on port 2, assigned address 2
> input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2
> Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda2) for (hda2)
> Using r5 hash to sort names
> VFS: Mounted root (reiserfs filesystem) readonly.
> Mounted devfs on /dev
> Freeing unused kernel memory: 356k freed
> Adding 250164k swap on /dev/hda3. Priority:-1 extents:1
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda7) for (hda7)
> Using r5 hash to sort names
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda6) for (hda6)
> Using r5 hash to sort names
> blk: queue c1378a00, I/O limit 4095Mb (mask 0xffffffff)
> hdc: lost interrupt
> hdc: CHECK for good STATUS
> hdd: CHECK for good STATUS
> nvidia: no version magic, tainting kernel.
> nvidia: module license 'NVIDIA' taints kernel.
> 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328 Wed Dec 17 13:54:51 PST 2003
> atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
> atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
>
> PS: this is my first kernel bugreport, if there are rules i broke(or lack of info), please excuse me
>
> --
>
> "Computers are just a medium of expression."
>
> - Paul Graham (www.paulgraham.com)
--
"Computers are just a medium of expression."
- Paul Graham (www.paulgraham.com)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/