USB memorystick access problem after kernel upgrade
From: Manfred Usselmann
Date: Sat Dec 13 2003 - 09:46:01 EST
Hi,
access to the memorystick in my Sony Handycam PC110E via USB no longer
works with newer kernels.
I had no problems accessing the pictures on the memorystick via USB with
RH 9 and a custom kernel 2.4.20-9. I could mount the memorystick as scsi
disk and it appeared as /mnt/camera (interestingly the mount point even
didn't needed to exist).
After upgrading my system to Fedora Core 1, which includes kernel
2.4.22, this does not work any longer:
kernel: usb_control/bulk_msg: timeout
kernel: usb.c: USB device not accepting new address=2 (error=-110)
The same problem occurs with kernel 2.4.23 which I build myself with
similar settings as the 2.4.20-9.
When I boot my old kernel under Fedora Core 1, mounting of the
memorystick does work as before with RH 9. So it must have something to
do with the kernel version.
Attached are some dmesg messages. Some from 2.4.20-9, where the stick
works and the others from 2.4.23 where it fails.
Thanks,
Manfred
2.4.20-9
=============================================================
kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
kernel: PCI: Using configuration type 1
kernel: PCI: Probing PCI hardware
kernel: PCI: Using IRQ router VIA [1106/0686] at 00:07.0
kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19
kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19
kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 17
kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 18
kernel: PCI->APIC IRQ transform: (B0,I13,P0) -> 17
kernel: PCI->APIC IRQ transform: (B0,I14,P0) -> 18
kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
kernel: PCI: Enabling Via external APIC routing
kernel: PCI: Via IRQ fixup for 00:07.3, from 5 to 3
kernel: PCI: Via IRQ fixup for 00:07.2, from 5 to 3
kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
kernel: usb.c: registered new driver usbdevfs
kernel: usb.c: registered new driver hub
kernel: usb-uhci.c: $Revision: 1.275 $ time 23:34:02 Apr 15 2003
kernel: usb-uhci.c: High bandwidth mode enabled
kernel: usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 19
kernel: usb-uhci.c: Detected 2 ports
kernel: usb.c: new USB bus registered, assigned bus number 1
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 19
kernel: usb-uhci.c: Detected 2 ports
kernel: usb.c: new USB bus registered, assigned bus number 2
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface
driver
kernel: usb.c: registered new driver hiddev
kernel: usb.c: registered new driver hid
kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
kernel: hid-core.c: USB HID support drivers
kernel: hub.c: connect-debounce failed, port 1 disabled
kernel: hub.c: new USB device 00:07.2-1, assigned address 2
kernel: usb.c: USB device 2 (vend/prod 0x54c/0x2e) is not claimed by any
active driver.
kernel: Initializing USB Mass Storage driver...
kernel: usb.c: registered new driver usb-storage
kernel: scsi1 : SCSI emulation for USB Mass Storage devices
kernel: Vendor: Sony Model: Sony DSC Rev: 3.00
kernel: Type: Direct-Access ANSI SCSI revision:
02
kernel: Attached scsi removable disk sde at scsi1, channel 0, id 0, lun
0
kernel: SCSI device sde: 126848 512-byte hdwr sectors (65 MB)
kernel: sde: Write Protect is off
kernel: sde: sde1
kernel: USB Mass Storage support registered.
kernel: usb-uhci.c: interrupt, status 3, frame# 1114
2.4.23
=============================================================
kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
kernel: PCI: Using configuration type 1
kernel: PCI: Probing PCI hardware
kernel: PCI: Probing PCI hardware (bus 00)
kernel: PCI: Using IRQ router VIA [1106/0686] at 00:07.0
kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19
kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19
kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 17
kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 18
kernel: PCI->APIC IRQ transform: (B0,I13,P0) -> 17
kernel: PCI->APIC IRQ transform: (B0,I14,P0) -> 18
kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
kernel: PCI: Enabling Via external APIC routing
kernel: PCI: Via IRQ fixup for 00:07.3, from 5 to 3
kernel: PCI: Via IRQ fixup for 00:07.2, from 5 to 3
kernel: usb.c: registered new driver usbdevfs
kernel: usb.c: registered new driver hub
kernel: host/usb-uhci.c: $Revision: 1.275 $ time 01:02:34 Dec 8 2003
kernel: host/usb-uhci.c: High bandwidth mode enabled
kernel: host/usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 19
kernel: host/usb-uhci.c: Detected 2 ports
kernel: usb.c: new USB bus registered, assigned bus number 1
kernel: Product: USB UHCI Root Hub
kernel: SerialNumber: c800
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: host/usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 19
kernel: host/usb-uhci.c: Detected 2 ports
kernel: usb.c: new USB bus registered, assigned bus number 2
kernel: Product: USB UHCI Root Hub
kernel: SerialNumber: c400
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: host/usb-uhci.c: v1.275:USB Universal Host Controller Interface
driver
kernel: Initializing USB Mass Storage driver...
kernel: usb.c: registered new driver usb-storage
kernel: USB Mass Storage support registered.
kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
kernel: hub.c: new USB device 00:07.2-1, assigned address 2
kernel: usb_control/bulk_msg: timeout
kernel: usb.c: USB device not accepting new address=2 (error=-110)
kernel: hub.c: new USB device 00:07.2-1, assigned address 3
kernel: usb_control/bulk_msg: timeout
kernel: usb.c: USB device not accepting new address=3 (error=-110)
--
________________________________________________________________________
Manfred Usselmann usselmann.m@xxxxxxxxxxxxx
--
Mit freundlichen Gruessen,
________________________________________________________________________
Manfred Usselmann usselmann.m@xxxxxxxxxxxxx
ICG IT Consulting GmbH Tel. +49/0 69 333 623
Bahnstrasse 7 Fax +49/0 69 306 845
D-65835 Liederbach, Germany Mobil +49/0 171 68 23 750
________________________________________________________________________
Manfred Usselmann E-Mail manfred@xxxxxxxxxxxx
Hundshager Weg 7 Tel. +49/0 6192 90 11 97
D-65719 Hofheim Fax +49/0 6192 90 11 98
Germany Mobil +49/0 171 68 23 750
________________________________________________________________________
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/