2.6.0-test10: Badness in kobject_get at lib/kobject.c:439

From: Marc Giger
Date: Thu Nov 27 2003 - 05:26:26 EST


Hi All,

I get this on every boot, but all things seems to work:

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
(scsi0:A:5): 20.000MB/s transfers (20.000MHz, offset 16)
(scsi0:A:5): 19.230MB/s transfers (19.230MHz, offset 16)
(scsi0:A:6): 10.000MB/s transfers (10.000MHz, offset 15)
Badness in kobject_get at lib/kobject.c:439
Call Trace:
[<c01fa168>] kobject_get+0x4c/0x4e
[<c0238eb4>] get_device+0x18/0x23
[<c0269894>] scsi_device_get+0x39/0x9d
[<c026999e>] __scsi_iterate_devices+0x3f/0x85
[<c026d0c1>] scsi_run_host_queues+0x1b/0x45
[<c0289b06>] ahc_linux_release_simq+0x9a/0xdf
[<c0285e98>] ahc_linux_dv_thread+0x22a/0x2c2
[<c010b1ae>] ret_from_fork+0x6/0x14
[<c0285c6e>] ahc_linux_dv_thread+0x0/0x2c2
[<c01092a5>] kernel_thread_helper+0x5/0xb

Vendor: IBM Model: DDYS-T18350N Rev: SA2A
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1007
Type: CD-ROM ANSI SCSI revision: 02
Vendor: SONY Model: CD-RW CRX140S Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 04
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 6, lun 0

greets

Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/