AIC-7901A not detected

[Michal Semler (volny.cz)]

Hi,

I need to get working onboard integrated AIC-7901A RAID controller.

Can somebody help me??? Controller is not detected nor 2.4.23-pre6 kernel! :((
Debian Wooody with Bunk debs,

2 XEON P4 CPUs with HT enabled in BIOS
1GB RAM
3 SCSI HDDs Seegate Cheetah in RAID1
Adaptec AIC-7901a
Intel Server motherboard SE7501BR2

lspci:
00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
00:00.1 Class ff00: Intel Corp. E7000 Series Host RASUM Controller (rev 01)
00:03.0 PCI bridge: Intel Corp. E7000 Series Hub Interface C PCI-to-PCI Bridge 
(rev 01)
00:03.1 Class ff00: Intel Corp. E7000 Series Hub Interface C RASUM Controller 
(rev 01)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub  (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub  (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub  (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 
02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
01:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
01:04.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller 
(rev 02)
01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
03:03.0 RAID bus controller: Adaptec AIC-7901A U320 w/HostRAID (rev 03)

dmesg disks detecting part:
ICH3: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x03a0-0x03a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x03a8-0x03af, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALLP AS30.0, ATA DISK drive
blk: queue c03ef3c0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 58633344 sectors (30020 MB) w/1902KiB Cache, CHS=3649/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2 hda3 hda4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

.config included

Attachment: config-experimental-XEON.bz2
Description: BZip2 compressed data