[BK-PATCH] kbuild: Separate output directory support
From: Sam Ravnborg
Date: Thu Sep 11 2003 - 05:06:41 EST
Hi Linus, please pull/apply.
bk pull bk://linux-sam.bkbits.net/kbuild2
Patch inlined as well.
Andrew Morton has this as PRI2 in his must-fix list.
With the following patch kbuild support building the kernel in a separate
output directory.
Since last post the following has been done:
o Put a bit documentation in README
o Use KBUILD_OUTPUT to specify where to put output files (not KBUILD_OBJ)
o use full path to install shell script in i386/boot/Makefile
Separate output directory support enables the following (at least):
o Building several configurations from the same SRC base, and in parrallel
o Building from a RO media
o More efficient build if files are retreived via NFS (files stored locally)
Usage is simple:
cd /path/to/kernel/src
mkdir ~/build/kernel
make O=~/build/kernel [Make options]
Please note: The O= syntax must be used for ALL invocations of make.
As an alternative you may set KBUILD_OUTPUT to the directory where
to put the output files.
The patch works for me, and I have tried with various configurations,
including allnoconfig and defconfig.
How it works:
If the O= option is used, or KBUILD_OUTPUT is set then a second invocation
of make happens in the output directory.
The second invocation of make uses VPATH to tell make where to locate
the files. Furthermore include options for gcc is modifyied to point
both in the directory where the kernel src is located, and in the
directory where the output files are located. The latter is used for
generated .h files.
When building the kernel the asm symlink is created. To support this
a new 'include2' directory is created. Within include2/ asm is a symlink to
the asm-$(ARCH) directory in the kernel src.
Also when building the kernel the asm-offset.h file is created, and
located in the include/asm-$(ARCH) directory, but included via
<asm/asm-offset.h>.
Therefore within include/ another asm symlink is created pointing to
the asm-$(ARCH) directory located in the output directory.
In Makefile.build the output directory is created if not already present.
This was needed to support xfs, and oprofile.
The patch is loosly based on ideas from Kai G. Roman Zippel
introduced support for this in kconfig long time ago.
Sam
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.1276 -> 1.1277
# scripts/Makefile.clean 1.12 -> 1.13
# arch/i386/boot/Makefile 1.27 -> 1.28
# scripts/Makefile.lib 1.20 -> 1.21
# scripts/Makefile.modpost 1.4 -> 1.5
# Makefile 1.427 -> 1.428
# scripts/Makefile.build 1.39 -> 1.40
# README 1.9 -> 1.10
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/09/11 sam@xxxxxxxxxxxxxxxxx 1.1277
# kbuild: Separate output directory
#
# Separate output directory support enables the following (at least):
# o Building several configurations from the same SRC base, and in parrallel
# o Building from a RO media
# o More efficient build if files are retreived via NFS (files stored locally)
#
# Usage is simple:
# cd /path/to/kernel/src
# mkdir ~/build/kernel
# make O=~/build/kernel [Make options]
# Please note: The O= syntax must be used for ALL invocations of make.
#
# As an alternative you may set KBUILD_OUTPUT to the directory where
# to put the output files.
#
# The patch works for me, and I have tried with various configurations,
# including allnoconfig and defconfig.
#
# How it works:
# If the O= option is used, or KBUILD_OUTPUT is set then a second invocation
# of make happens in the output directory.
# The second invocation of make uses VPATH to tell make where to locate
# the files. Furthermore include options for gcc is modifyied to point
# both in the directory where the kernel src is located, and in the
# directory where the output files are located. The latter is used for
# generated .h files.
#
# When building the kernel the asm symlink is created. To support this
# a new 'include2' directory is created. Within include2/ asm is a symlink to
# the asm-$(ARCH) directory in the kernel src.
# Also when building the kernel the asm-offset.h file is created, and
# located in the include/asm-$(ARCH) directory, but included via
# <asm/asm-offset.h>.
# Therefore within include/ another asm symlink is created pointing to
# the asm-$(ARCH) directory located in the output directory.
#
# In Makefile.build the output directory is created if not already present.
# This was needed to support xfs, and oprofile.
#
# The patch is loosly based on ideas from Kai G. Roman Zippel
# introduced support for this in kconfig long time ago
# --------------------------------------------
#
diff -Nru a/Makefile b/Makefile
--- a/Makefile Thu Sep 11 12:01:53 2003
+++ b/Makefile Thu Sep 11 12:01:53 2003
@@ -9,6 +9,9 @@
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
+# Do not print "Entering directory ..."
+MAKEFLAGS += --no-print-directory
+
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
@@ -25,6 +28,86 @@
# descending is started. They are now explicitly listed as the
# prepare rule.
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifdef V
+ ifeq ("$(origin V)", "command line")
+ KBUILD_VERBOSE = $(V)
+ endif
+endif
+ifndef KBUILD_VERBOSE
+ KBUILD_VERBOSE = 0
+endif
+
+# Call sparse as part of compilation of C files
+# Use 'make C=1' to enable sparse checking
+
+ifdef C
+ ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+ endif
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntax'es are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assigment takes precedence over the KBUILD_OUTPUT environment variable.
+
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifdef O
+ ifeq ("$(origin O)", "command line")
+ KBUILD_OUTPUT := $(O)
+ endif
+endif
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT); /bin/pwd)
+%:
+ @$(MAKE) -C $(KBUILD_OUTPUT) \
+ KBUILD_SRC=$(CURDIR) \
+ KBUILD_VERBOSE=$(KBUILD_VERBOSE) \
+ KBUILD_CHECK=$(KBUILD_CHECK) \
+ -f $(CURDIR)/Makefile $(MAKECMDGOALS)
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),.)
+TOPDIR := $(srctree)
+# FIXME - TOPDIR is obsolete, use srctree/objtree
+objtree := $(CURDIR)
+src := $(srctree)
+obj := $(objtree)
+
+VPATH := $(srctree)
+
+export srctree objtree VPATH TOPDIR
+
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
# SUBARCH tells the usermode build what the underlying arch is. That is set
@@ -69,7 +152,6 @@
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
-TOPDIR := $(CURDIR)
HOSTCC = gcc
HOSTCXX = g++
@@ -110,40 +192,8 @@
KBUILD_MODULES := 1
endif
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE KBUILD_CHECKSRC
-
-# To put more focus on warnings, less verbose as default
-# Use 'make V=1' to see the full commands
-
-ifdef V
- ifeq ("$(origin V)", "command line")
- KBUILD_VERBOSE = $(V)
- endif
-endif
-ifndef KBUILD_VERBOSE
- KBUILD_VERBOSE = 0
-endif
-
-# Call sparse as part of compilation of C files
-# Use 'make C=1' to enable sparse checking
-
-ifdef C
- ifeq ("$(origin C)", "command line")
- KBUILD_CHECKSRC = $(C)
- endif
-endif
-ifndef KBUILD_CHECKSRC
- KBUILD_CHECKSRC = 0
-endif
-
-# Do not print 'Entering directory ...'
-
-MAKEFLAGS += --no-print-directory
-
-# For maximum performance (+ possibly random breakage, uncomment
-# the following)
-
-#MAKEFLAGS += -rR
+export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_CHECKSRC KBUILD_SRC
# Beautify output
# ---------------------------------------------------------------------------
@@ -185,14 +235,13 @@
export quiet Q KBUILD_VERBOSE
-# Paths to obj / src tree
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
-src := .
-obj := .
-srctree := .
-objtree := .
+# For maximum performance (+ possibly random breakage, uncomment
+# the following)
-export srctree objtree
+#MAKEFLAGS += -rR
# Make variables (CC, etc...)
@@ -222,13 +271,15 @@
NOSTDINC_FLAGS = -nostdinc -iwithprefix include
-CPPFLAGS := -D__KERNEL__ -Iinclude
+CPPFLAGS := -D__KERNEL__ -Iinclude \
+ $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
+
CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-fno-strict-aliasing -fno-common
AFLAGS := -D__ASSEMBLY__
export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
- CONFIG_SHELL TOPDIR HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
+ CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
HOSTCXX HOSTCXXFLAGS LDFLAGS_BLOB LDFLAGS_MODULE CHECK
@@ -294,7 +345,7 @@
# Handle them one by one.
%:: FORCE
- $(Q)$(MAKE) $@
+ $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
else
ifeq ($(config-targets),1)
@@ -341,7 +392,7 @@
endif
-include arch/$(ARCH)/Makefile
+include $(srctree)/arch/$(ARCH)/Makefile
# Let architecture Makefiles change CPPFLAGS if needed
CFLAGS := $(CPPFLAGS) $(CFLAGS)
@@ -487,14 +538,34 @@
# Handle descending into subdirectories listed in $(SUBDIRS)
.PHONY: $(SUBDIRS)
-$(SUBDIRS): prepare
+$(SUBDIRS): prepare-all
$(Q)$(MAKE) $(build)=$@
-# Things we need done before we descend to build or make
-# module versions are listed in "prepare"
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare-all".
+# A multi level approach is used. prepare1 is updated first, then prepare0.
+# prepare-all is the collection point for the prepare targets.
+
+.PHONY: prepare-all prepare prepare0 prepare1
+
+# prepare1 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+# 2) Create the include2 directory, used for the second asm symlink
+
+prepare1:
+ifneq ($(KBUILD_SRC),)
+ @echo ' Using $(srctree) as source for kernel'
+ $(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+ echo " $(srctree) is not clean, please run 'make mrproper'";\
+ echo " in the '$(srctree)' directory.";\
+ /bin/false; \
+ fi;
+ $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
+ $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
+endif
-.PHONY: prepare
-prepare: include/linux/version.h include/asm include/config/MARKER
+prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
ifdef KBUILD_MODULES
ifeq ($(origin SUBDIRS),file)
$(Q)rm -rf $(MODVERDIR)
@@ -505,6 +576,9 @@
endif
$(if $(CONFIG_MODULES),$(Q)mkdir -p $(MODVERDIR))
+# All the preparing..
+prepare-all: prepare0 prepare
+
# Leave this as default for preprocessing vmlinux.lds.S, which is now
# done in arch/$(ARCH)/kernel/Makefile
@@ -533,8 +607,9 @@
# before switching between archs anyway.
include/asm:
- @echo ' Making asm->asm-$(ARCH) symlink'
- @ln -s asm-$(ARCH) $@
+ @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
+ $(Q)if [ ! -d include ]; then mkdir -p include; fi;
+ @ln -fsn asm-$(ARCH) $@
# Split autoconf.h into include/linux/config/*
@@ -585,7 +660,7 @@
.PHONY: modules
modules: $(SUBDIRS) $(if $(KBUILD_BUILTIN),vmlinux)
@echo ' Building modules, stage 2.';
- $(Q)$(MAKE) -rR -f scripts/Makefile.modpost
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# Install modules
@@ -603,7 +678,7 @@
@rm -f $(MODLIB)/build
@mkdir -p $(MODLIB)/kernel
@ln -s $(TOPDIR) $(MODLIB)/build
- $(Q)$(MAKE) -rR -f scripts/Makefile.modinst
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
# If System.map exists, run depmod. This deliberately does not have a
# dependency on System.map since that would run the dependency tree on
@@ -680,7 +755,8 @@
$(MODVERDIR) \
.tmp_export-objs \
include/config \
- include/linux/modules
+ include/linux/modules \
+ include2
# clean - Delete all intermediate files
#
@@ -814,6 +890,7 @@
echo ' No architecture specific help defined for $(ARCH)')
@echo ''
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
@echo ' make C=1 [targets] Check all c source with checker tool'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@@ -849,7 +926,8 @@
# FIXME Should go into a make.lib or something
# ===========================================================================
-a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) $(NOSTDINC_FLAGS) \
+a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
+ $(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
quiet_cmd_as_o_S = AS $@
@@ -907,6 +985,7 @@
define filechk
@set -e; \
echo ' CHK $@'; \
+ mkdir -p $(dir $@); \
$(filechk_$(1)) < $< > $@.tmp; \
if [ -r $@ ] && cmp -s $@ $@.tmp; then \
rm -f $@.tmp; \
@@ -919,16 +998,18 @@
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
# Usage:
# $(Q)$(MAKE) $(build)=dir
-build := -f scripts/Makefile.build obj
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f scripts/Makefile.clean obj
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
# $(call descend,<dir>,<target>)
# Recursively call a sub-make in <dir> with target <target>
# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f scripts/Makefile.build obj=$(1) $(2)
+descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
+
+endif # skip-makefile
FORCE:
diff -Nru a/README b/README
--- a/README Thu Sep 11 12:01:53 2003
+++ b/README Thu Sep 11 12:01:53 2003
@@ -108,11 +108,26 @@
you can just update packages when obvious problems arise during
build or operation.
-CONFIGURING the kernel:
+BUILD directory for the kernel:
+
+ When compiling the kernel all output files will per default be
+ stored together with the kernel source code.
+ Using the option "make O=output/dir" allow you to specify an alternate
+ place for the output files (including .config).
+ Example:
+ kernel source code: /usr/src/linux-2.6.N
+ build directory: /home/name/build/kernel
+
+ To configure and build the kernel use:
+ cd /usr/src/linux-2.6.N
+ make O=/home/name/build/kernel menuconfig
+ make O=/home/name/build/kernel
+ sudo make O=/home/name/build/kernel install_modules install
- - Do a "make config" to configure the basic kernel. "make config" needs
- bash to work: it will search for bash in $BASH, /bin/bash and /bin/sh
- (in that order), so one of those must be correct for it to work.
+ Please note: If the 'O=output/dir' option is used then it must be
+ used for all invocations of make.
+
+CONFIGURING the kernel:
Do not skip this step even if you are only upgrading one minor
version. New configuration options are added in each release, and
diff -Nru a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile
--- a/arch/i386/boot/Makefile Thu Sep 11 12:01:53 2003
+++ b/arch/i386/boot/Makefile Thu Sep 11 12:01:53 2003
@@ -99,4 +99,4 @@
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
install: $(BOOTIMAGE)
- sh $(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
+ sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
diff -Nru a/scripts/Makefile.build b/scripts/Makefile.build
--- a/scripts/Makefile.build Thu Sep 11 12:01:53 2003
+++ b/scripts/Makefile.build Thu Sep 11 12:01:53 2003
@@ -14,6 +14,16 @@
include scripts/Makefile.lib
+ifneq ($(KBUILD_SRC),)
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+
+# Create directories for object files if directory does not exist
+# Needed when obj-y := dir/file.o syntax is used
+_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
+endif
+
+
ifdef EXTRA_TARGETS
$(warning kbuild: $(obj)/Makefile - Usage of EXTRA_TARGETS is obsolete in 2.5. Please fix!)
endif
diff -Nru a/scripts/Makefile.clean b/scripts/Makefile.clean
--- a/scripts/Makefile.clean Thu Sep 11 12:01:53 2003
+++ b/scripts/Makefile.clean Thu Sep 11 12:01:53 2003
@@ -63,4 +63,4 @@
# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f scripts/Makefile.clean obj
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
diff -Nru a/scripts/Makefile.lib b/scripts/Makefile.lib
--- a/scripts/Makefile.lib Thu Sep 11 12:01:53 2003
+++ b/scripts/Makefile.lib Thu Sep 11 12:01:53 2003
@@ -58,6 +58,11 @@
# in the local directory
subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)))
+# $(obj-dirs) is a list of directories that contain object files
+obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))
+obj-dirs += $(foreach f,$(host-progs), $(if $(dir $(f)),$(dir $(f))))
+obj-dirs := $(strip $(sort $(filter-out ./,$(obj-dirs))))
+
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
@@ -107,6 +112,7 @@
multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
+obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
host-progs := $(addprefix $(obj)/,$(host-progs))
host-csingle := $(addprefix $(obj)/,$(host-csingle))
host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
@@ -129,15 +135,46 @@
# where foo and bar are the name of the modules.
basename_flags = -DKBUILD_BASENAME=$(subst $(comma),_,$(subst -,_,$(*F)))
modname_flags = $(if $(filter 1,$(words $(modname))),-DKBUILD_MODNAME=$(subst $(comma),_,$(subst -,_,$(modname))))
-c_flags = -Wp,-MD,$(depfile) $(CFLAGS) $(NOSTDINC_FLAGS) \
- $(modkern_cflags) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o) \
- $(basename_flags) $(modname_flags)
-a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(NOSTDINC_FLAGS)\
- $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
-hostc_flags = -Wp,-MD,$(depfile) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS)\
- $(HOSTCFLAGS_$(*F).o)
-hostcxx_flags = -Wp,-MD,$(depfile) $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS)\
- $(HOSTCXXFLAGS_$(*F).o)
+
+
+_c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o)
+_a_flags = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS_$(*F).o)
+_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) $(HOSTCXXFLAGS_$(*F).o)
+
+
+# If building the kernel in a separate objtree expand all occurrences
+# of -Idir to -Idir -I$(srctree)/dir.
+# hereby allowing gcc to locate files in both trees. Local tree first.
+
+ifeq ($(KBUILD_SRC),)
+__c_flags = $(_c_flags)
+__a_flags = $(_a_flags)
+__hostc_flags = $(_hostc_flags)
+__hostcxx_flags = $(_hostcxx_flags)
+else
+flags = $(foreach o,$($(1)),\
+ $(if $(filter -I%,$(o)),$(patsubst -I%,-I$(srctree)/%,$(o)),$(o)))
+
+# -I$(obj) locate generated .h files
+# -I$(srctree)/$(src) locate .h files in srctree, from generated .c files
+# FIXME: Replace both with specific EXTRA_CFLAGS statements
+__c_flags = -I$(obj) -I$(srctree)/$(src) $(call flags,_c_flags)
+__a_flags = $(call flags,_a_flags)
+__hostc_flags = -I$(obj) $(call flags,_hostc_flags)
+__hostcxx_flags = $(call flags,_hostcxx_flags)
+endif
+
+c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
+ $(__c_flags) $(modkern_cflags) \
+ $(basename_flags) $(modname_flags)
+
+a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
+ $(__a_flags) $(modkern_aflags)
+
+hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags)
+hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
+
ld_flags = $(LDFLAGS) $(EXTRA_LDFLAGS)
# Finds the multi-part object the current object will be linked into
@@ -230,9 +267,9 @@
# $(call descend,<dir>,<target>)
# Recursively call a sub-make in <dir> with target <target>
# Usage is deprecated, because make do not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f scripts/Makefile.build obj=$(1) $(2)
+descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
-build := -f scripts/Makefile.build obj
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
diff -Nru a/scripts/Makefile.modpost b/scripts/Makefile.modpost
--- a/scripts/Makefile.modpost Thu Sep 11 12:01:53 2003
+++ b/scripts/Makefile.modpost Thu Sep 11 12:01:53 2003
@@ -35,7 +35,7 @@
# Compile version info for unresolved symbols
quiet_cmd_cc_o_c = CC $@
- cmd_cc_o_c = $(CC) -Wp,-MD,$(depfile) $(CFLAGS) $(CFLAGS_MODULE) \
+ cmd_cc_o_c = $(CC) $(c_flags) $(CFLAGS_MODULE) \
-c -o $@ $<
$(modules:.ko=.mod.o): %.mod.o: %.mod.c FORCE
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/