2.6.0-test5: Oops on mount /dev/md0
From: Dick Streefland
Date: Wed Sep 10 2003 - 15:49:51 EST
While experimenting with RAID-1 on two loopback devices, I got a
kernel Oops. The RAID-1 volume contains an ext2 filesystem, which I
can mount just fine. However, trying to mount it after turning off the
RAID device with raidstop (which should fail of course), results in a
segmentation fault and kernel Oops. Something is stuck after this,
causing "sync" to hang. This is the scenario:
# cat /etc/raidtab
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
nr-spare-disks 0
chunk-size 4
persistent-superblock 1
device /dev/loop1
raid-disk 0
device /dev/loop2
raid-disk 1
# losetup /dev/loop1 /tmp/img1
# losetup /dev/loop2 /tmp/img2
# raidstart /dev/md0
# raidstop /dev/md0
# mount -t ext2 /dev/md0 /mnt
Segmentation fault
>From /var/log/messages:
Sep 10 21:45:42 zaphod kernel: md: autorun ...
Sep 10 21:45:42 zaphod kernel: md: considering loop2 ...
Sep 10 21:45:42 zaphod kernel: md: adding loop2 ...
Sep 10 21:45:42 zaphod kernel: md: adding loop1 ...
Sep 10 21:45:42 zaphod kernel: md: created md0
Sep 10 21:45:42 zaphod kernel: md: bind<loop1>
Sep 10 21:45:42 zaphod kernel: md: bind<loop2>
Sep 10 21:45:42 zaphod kernel: md: running: <loop2><loop1>
Sep 10 21:45:42 zaphod kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Sep 10 21:45:42 zaphod kernel: md: ... autorun DONE.
Sep 10 21:45:42 zaphod kernel: md: syncing RAID array md0
Sep 10 21:45:42 zaphod kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
Sep 10 21:45:42 zaphod kernel: md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction.
Sep 10 21:45:42 zaphod kernel: md: using 128k window, over a total of 10176 blocks.
Sep 10 21:45:45 zaphod kernel: md: md0: sync done.
Sep 10 21:45:48 zaphod kernel: md: md0 stopped.
Sep 10 21:45:48 zaphod kernel: md: unbind<loop2>
Sep 10 21:45:48 zaphod kernel: md: export_rdev(loop2)
Sep 10 21:45:48 zaphod kernel: md: unbind<loop1>
Sep 10 21:45:48 zaphod kernel: md: export_rdev(loop1)
Sep 10 21:45:57 zaphod kernel: printing eip:
Sep 10 21:45:57 zaphod kernel: c03a7747
Sep 10 21:45:57 zaphod kernel: Oops: 0000 [#1]
Sep 10 21:45:57 zaphod kernel: CPU: 1
Sep 10 21:45:57 zaphod kernel: EIP: 0060:[make_request+23/752] Not tainted
Sep 10 21:45:57 zaphod kernel: EFLAGS: 00010296
Sep 10 21:45:57 zaphod kernel: EIP is at make_request+0x17/0x2f0
Sep 10 21:45:57 zaphod kernel: eax: dbce76e0 ebx: dbce1600 ecx: dbfd3580 edx: 00000400
Sep 10 21:45:57 zaphod kernel: esi: 00000002 edi: 00000000 ebp: 00000002 esp: d61e9d5c
Sep 10 21:45:57 zaphod kernel: ds: 007b es: 007b ss: 0068
Sep 10 21:45:57 zaphod kernel: Process mount (pid: 1053, threadinfo=d61e8000 task=d750d350)
Sep 10 21:45:57 zaphod kernel: Stack: dbfde4a0 00000200 00000000 00000000 dbce76e0 c0120750 d61e9d94 d61e9d94
Sep 10 21:45:57 zaphod kernel: d6bbcf10 00000000 00000000 00000000 d750d350 dbce1600 00000002 d5b41a20
Sep 10 21:45:57 zaphod kernel: 00000002 c02d190f dbce1600 d5b41a20 00000000 00000000 00000010 c01641d7
Sep 10 21:45:57 zaphod kernel: Call Trace:
Sep 10 21:45:57 zaphod kernel: [autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
Sep 10 21:45:57 zaphod kernel: [generic_make_request+367/496] generic_make_request+0x16f/0x1f0
Sep 10 21:45:57 zaphod kernel: [bio_alloc+215/448] bio_alloc+0xd7/0x1c0
Sep 10 21:45:57 zaphod kernel: [submit_bh+161/512] submit_bh+0xa1/0x200
Sep 10 21:45:57 zaphod kernel: [submit_bio+84/160] submit_bio+0x54/0xa0
Sep 10 21:45:57 zaphod kernel: [__bread_slow+91/176] __bread_slow+0x5b/0xb0
Sep 10 21:45:57 zaphod kernel: [__bread+62/80] __bread+0x3e/0x50
Sep 10 21:45:57 zaphod kernel: [ext2_fill_super+175/2336] ext2_fill_super+0xaf/0x920
Sep 10 21:45:57 zaphod kernel: [disk_name+177/192] disk_name+0xb1/0xc0
Sep 10 21:45:57 zaphod kernel: [sb_set_blocksize+37/96] sb_set_blocksize+0x25/0x60
Sep 10 21:45:57 zaphod kernel: [get_sb_bdev+296/352] get_sb_bdev+0x128/0x160
Sep 10 21:45:57 zaphod kernel: [alloc_vfsmnt+133/192] alloc_vfsmnt+0x85/0xc0
Sep 10 21:45:57 zaphod kernel: [ext2_get_sb+47/64] ext2_get_sb+0x2f/0x40
Sep 10 21:45:57 zaphod kernel: [ext2_fill_super+0/2336] ext2_fill_super+0x0/0x920
Sep 10 21:45:57 zaphod kernel: [do_kern_mount+95/224] do_kern_mount+0x5f/0xe0
Sep 10 21:45:57 zaphod kernel: [do_add_mount+160/432] do_add_mount+0xa0/0x1b0
Sep 10 21:45:57 zaphod kernel: [do_mount+352/432] do_mount+0x160/0x1b0
Sep 10 21:45:57 zaphod kernel: [copy_mount_options+268/272] copy_mount_options+0x10c/0x110
Sep 10 21:45:57 zaphod kernel: [sys_mount+242/368] sys_mount+0xf2/0x170
Sep 10 21:45:57 zaphod kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Sep 10 21:45:57 zaphod kernel:
Sep 10 21:45:57 zaphod kernel: Code: 8b 47 08 89 44 24 0c fa bb 00 e0 ff ff 21 e3 ff 43 14 f0 fe
This is a dual Pentium-III kernel with the following RAID options:
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID1=y
CONFIG_BLK_DEV_DM=y
The mount version is 2.11z.
--
Dick Streefland //// De Bilt
dick.streefland@xxxxxxxxx (@ @) The Netherlands
------------------------------oOO--(_)--OOo------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/