Re: HPT372 2.344 slow drive issue

[Geller Sandor]

On Wed, 27 Aug 2003, Chris Cheney wrote:

> I have a Soyo P4I875P motherboard that has a HPT372 chip with bios 2.344
> The hard drive on the controller is a Maxtor DiamondMax Plus 9 200GB. I
> have tested the drive on ICH5 and it does around 48-52MB/s but on HPT372
> it does ~ 9MB/s. This still shows up on 2.6.0-test4-bk2 and did on 2.4.x
> but I haven't tested on 2.4 for several weeks.

I reported a similar issue some weeks ago (Abit K7D-RAID, integrated
HPT372 IDE controller), I played with 2.4.22-pre10 for a while. With the
opensource HPT driver, I reached good speed sometimes (two ATA drives were
connected to the HPT, one drive on each channel), but not reliable - after
a reboot, the md synchronisation between the two drives went down to
1MB/s... The HPT driver uses the drives as SCSI drives, so it's a little
painful to switch between the kernel and the HPT driver (initrd, mdadm,
and so on...). Finally I gave up, and disabled the HPT controller in the
system BIOS. Maybe the problem is a simple IDE autotune problem, I don't
know.

  Geller Sandor <wildy@xxxxxxxxxxxxxxxxxxxxx>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/