Re: DEC KZPSA SCSI card - is there a linux driver?

[Wakko Warner]

> I guess this mail should have gone to a mailing list like linux-scsi, 
> but I just couldn't find that list's address - sorry if this mail is not 
> to be here :)
> 
> so I have just got a DEC PCI SCSI card which has a sym53c720 chip and an 
> intel 930 chip and an LSI chip on board. it is a full-length 32bit PCI 
> scsi card. (it was working fine in an alpha axp system with true64 unix, 
> and now it is installed in a PC.)
> 
> with linux kernel 2.4.20 (suse8.2) trying all the modules, I just 
> couldn't get it working.
> I moved the card to other PCI slots and play with irqs, but no success.
> 
> please help that which driver should get it working if this card is 
> supported at all.

Are you sure it's not a raid controller?  Being a full length PCI card, it
may be.  DEC used Mylex DAC960 controller in some of their servers.  My
AS1000A came with 2 single channel DAC960PD cards.  Does it have a slot for
memory? (good indication of being raid)

> 00:0d.0 SCSI storage controller: Digital Equipment Corporation KZPSA [KZPSA]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> ParErr+ Stepping- SERR+ FastB2B-
>         Status: Cap- 66Mhz- UDF+ FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 66 (2000ns min, 31750ns max), cache line size 08
>         Interrupt: pin A routed to IRQ 7
>         BIST result: 00
>         Region 0: Memory at fedfd000 (64-bit, non-prefetchable) [size=4K]
>         Region 2: I/O ports at d000 [size=4K]
>         Region 3: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
>         Expansion ROM at <unassigned> [disabled] [size=64K]

Doesn't seem like a raid controller here.  Is this an alpha machine?

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/