cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003
PCI: Enabling device 02:00.0 (0000 -> 0003)
xircom_tulip_cb.c derived from tulip.c:v0.91 4/14/99 becker@scyld.com
 unofficial 2.4.x kernel port, version 0.91+LK1.1, October 11, 2001
PCI: Setting latency timer of device 02:00.0 to 64
eth1: Xircom Cardbus Adapter rev 3 at 0x4000, 00:10:A4:D2:A3:11, IRQ 11.
eth1:  MII transceiver #0 config 3100 status 7809 advertising 01e1.
xircom_tulip_cb: outl_CSR6 too many attempts,csr5=0x60100000
xircom_tulip_cb: outl_CSR6 too many attempts,csr5=0x60100000
xircom_remove_one(eth1)
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003
PCI: Enabling device 02:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 02:00.0 to 64
eth1: Xircom Cardbus Adapter rev 3 at 0x4000, 00:10:A4:D2:A3:11, IRQ 11.
eth1:  MII transceiver #0 config 3100 status 7809 advertising 01e1.
xircom_tulip_cb: outl_CSR6 too many attempts,csr5=0x60100000
xircom_tulip_cb: outl_CSR6 too many attempts,csr5=0x60100000
xircom_remove_one(eth1)
cs: cb_free(bus 2)