Justin,
I was able to get some verbose information from boot process on this
machine regarding aic7xxx (new) driver and AHA-2940UW2 with IBM 36LZX
10k rpm disk drive.Attached is 2 log files:
scsi_mod.max_scsi_luns=1 and scsi_mod.scsi_logging_level=0x140 as
suggested by Patrick
and
aic7xxx=verbose given to lilo boot loader
Hopefully you will be able to see what's happening when the adapter is
probed.
Thank you,
Paul B.
Connected
scsi.mod. _mod.scsi_logging_level=0x140 scsi_mods d .max_scsi_luns=1
Loading Slackware-2.6..............................
BIOS data check successful
Linux version 2.6.0-test2-mm4 (root@blaze) (gcc version 3.2.2) #1 Tue Aug 5 02:42:20 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5240
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
touching all pages ...
done.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6bb0
ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff7680
ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Slackware-2.6 ro root=803 rootflags=quota console=ttyS0,9600n8 console=tty0 scsi_mod.scsi_logging_level=0x140 scsi_mod.max_scsi_luns=1
Unknown boot option `scsi_mod.max_scsi_luns=1': ignoring
current: c03859c0
current->thread_info: c03d6000
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2305.090 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4554.75 BogoMIPS
Memory: 1033676k/1048512k available (2285k kernel code, 13896k reserved, 615k data, 348k init, 131008k highmem)
zapping low mappings.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2304.0829 MHz.
..... host bus clock speed is 400.0839 MHz.
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfabc0, last bus=3
PCI: Using configuration type 1
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030714
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fb610
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb640, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
pty: 512 Unix98 ptys configured
Machine check exception polling timer started.
Enabling SEP on CPU 0
Total HugeTLB memory allocated, 0
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
SGI XFS for Linux with ACLs, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits correctly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci0000:00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-372200, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: host protected area => 1
hda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=43800/16/63
/dev/ide/host0/bus0/target0/lun0: p1
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi scan: INQUIRY to host 0 channel 0 id 0 lun 0
(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 1 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 2 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 3 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 4 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 5 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 6 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 8 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 9 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 10 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 11 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 12 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 13 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 14 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
scsi scan: INQUIRY to host 0 channel 0 id 15 lun 0
scsi scan: 1st INQUIRY failed with code 0x10000
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 2 devices found
VFS: Cannot open root device "803" or unknown-block(8,3)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(8,3)
Connected
Loading Slackware-2.6..............................
BIOS data check successful
Linux version 2.6.0-test2-mm4 (root@blaze) (gcc version 3.2.2) #1 Tue Aug 5 02:42:20 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5240
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
touching all pages ...
done.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6bb0
ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff7680
ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Slackware-2.6 ro root=803 rootflags=quota console=ttyS0,9600n8 console=tty0 aic7xxx=verbose
current: c03859c0
current->thread_info: c03d6000
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2304.999 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4554.75 BogoMIPS
Memory: 1033676k/1048512k available (2285k kernel code, 13896k reserved, 615k data, 348k init, 131008k highmem)
zapping low mappings.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2304.0796 MHz.
..... host bus clock speed is 400.0834 MHz.
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfabc0, last bus=3
PCI: Using configuration type 1
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030714
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fb610
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb640, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
pty: 512 Unix98 ptys configured
Machine check exception polling timer started.
Enabling SEP on CPU 0
Total HugeTLB memory allocated, 0
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
SGI XFS for Linux with ACLs, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits correctly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci0000:00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-372200, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: host protected area => 1
hda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=43800/16/63
/dev/ide/host0/bus0/target0/lun0: p1
ahc_pci:1:10:0: Reading SEEPROM...done.
ahc_pci:1:10:0: BIOS eeprom is present
ahc_pci:1:10:0: Secondary High byte termination Enabled
ahc_pci:1:10:0: Primary Low Byte termination Enabled
ahc_pci:1:10:0: Primary High Byte termination Enabled
ahc_pci:1:10:0: Downloading Sequencer Program... 423 instructions downloaded
ahc_pci:1:10:0: Features 0x56f6, Bugs 0x6, Flags 0x20485540
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi0: Slave Alloc 0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period a, offset 7f
(scsi0:A:0:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 40.0MHz, offset = 0x3f
(scsi0:A:0): 40.000MB/s transfers (40.000MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period b, offset 7f
(scsi0:A:0:0): Received SDTR period c, offset 3f
Filtered to period c, offset 3f
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 20.0MHz, offset = 0x3f
(scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending SDTR period a, offset 7f
(scsi0:A:0:0): Received SDTR period a, offset 3f
Filtered to period a, offset 3f
(scsi0:A:0): 40.000MB/s transfers (40.000MHz, offset 63)
scsi0: target 0 synchronous at 40.0MHz, offset = 0x3f
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending SDTR period b, offset 7f
(scsi0:A:0:0): Received SDTR period c, offset 3f
Filtered to period c, offset 3f
(scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 63)
scsi0: target 0 synchronous at 20.0MHz, offset = 0x3f
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period d, offset 7f
(scsi0:A:0:0): Received SDTR period d, offset 3f
Filtered to period d, offset 3f
(scsi0:A:0): 38.460MB/s transfers (19.230MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 16.0MHz, offset = 0x3f
(scsi0:A:0): 19.230MB/s transfers (19.230MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period e, offset 7f
(scsi0:A:0:0): Received SDTR period e, offset 3f
Filtered to period e, offset 3f
(scsi0:A:0): 35.714MB/s transfers (17.857MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 16.0MHz, offset = 0x3f
(scsi0:A:0): 17.857MB/s transfers (17.857MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period f, offset 7f
(scsi0:A:0:0): Received SDTR period f, offset 3f
Filtered to period f, offset 3f
(scsi0:A:0): 33.332MB/s transfers (16.666MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 16.0MHz, offset = 0x3f
(scsi0:A:0): 16.666MB/s transfers (16.666MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 10, offset 7f
(scsi0:A:0:0): Received SDTR period 10, offset 3f
Filtered to period 10, offset 3f
(scsi0:A:0): 31.250MB/s transfers (15.625MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 13.4MHz, offset = 0x3f
(scsi0:A:0): 15.625MB/s transfers (15.625MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 11, offset 7f
(scsi0:A:0:0): Received SDTR period 11, offset 3f
Filtered to period 11, offset 3f
(scsi0:A:0): 29.410MB/s transfers (14.705MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 13.4MHz, offset = 0x3f
(scsi0:A:0): 14.705MB/s transfers (14.705MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 12, offset 7f
(scsi0:A:0:0): Received SDTR period 12, offset 3f
Filtered to period 12, offset 3f
(scsi0:A:0): 27.776MB/s transfers (13.888MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 13.4MHz, offset = 0x3f
(scsi0:A:0): 13.888MB/s transfers (13.888MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 13, offset 7f
(scsi0:A:0:0): Received SDTR period 13, offset 3f
Filtered to period 13, offset 3f
(scsi0:A:0): 26.314MB/s transfers (13.157MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 13.157MB/s transfers (13.157MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 14, offset 7f
(scsi0:A:0:0): Received SDTR period 14, offset 3f
Filtered to period 14, offset 3f
(scsi0:A:0): 25.000MB/s transfers (12.500MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 12.500MB/s transfers (12.500MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 15, offset 7f
(scsi0:A:0:0): Received SDTR period 15, offset 3f
Filtered to period 15, offset 3f
(scsi0:A:0): 23.808MB/s transfers (11.904MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 11.904MB/s transfers (11.904MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 16, offset 7f
(scsi0:A:0:0): Received SDTR period 16, offset 3f
Filtered to period 16, offset 3f
(scsi0:A:0): 22.726MB/s transfers (11.363MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 11.363MB/s transfers (11.363MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 17, offset 7f
(scsi0:A:0:0): Received SDTR period 17, offset 3f
Filtered to period 17, offset 3f
(scsi0:A:0): 21.738MB/s transfers (10.869MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 10.869MB/s transfers (10.869MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 18, offset 7f
(scsi0:A:0:0): Received SDTR period 18, offset 3f
Filtered to period 18, offset 3f
(scsi0:A:0): 20.832MB/s transfers (10.416MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 10.416MB/s transfers (10.416MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 19, offset 7f
(scsi0:A:0:0): Received SDTR period 19, offset 3f
Filtered to period 19, offset 3f
(scsi0:A:0): 20.000MB/s transfers (10.000MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
(scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 1a, offset 7f
(scsi0:A:0:0): Received SDTR period 1a, offset 3f
Filtered to period 1a, offset 3f
(scsi0:A:0): 19.230MB/s transfers (9.615MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
(scsi0:A:0): 9.615MB/s transfers (9.615MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 1b, offset 7f
(scsi0:A:0:0): Received SDTR period 1b, offset 3f
Filtered to period 1b, offset 3f
(scsi0:A:0): 18.518MB/s transfers (9.259MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
(scsi0:A:0): 9.259MB/s transfers (9.259MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 1c, offset 7f
(scsi0:A:0:0): Received SDTR period 1c, offset 3f
Filtered to period 1c, offset 3f
(scsi0:A:0): 17.856MB/s transfers (8.928MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
(scsi0:A:0): 8.928MB/s transfers (8.928MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 1d, offset 7f
(scsi0:A:0:0): Received SDTR period 1d, offset 3f
Filtered to period 1d, offset 3f
(scsi0:A:0): 17.240MB/s transfers (8.620MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
(scsi0:A:0): 8.620MB/s transfers (8.620MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 1e, offset 7f
(scsi0:A:0:0): Received SDTR period 1e, offset 3f
Filtered to period 1e, offset 3f
(scsi0:A:0): 16.666MB/s transfers (8.333MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
(scsi0:A:0): 8.333MB/s transfers (8.333MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 1f, offset 7f
(scsi0:A:0:0): Received SDTR period 1f, offset 3f
Filtered to period 1f, offset 3f
(scsi0:A:0): 16.128MB/s transfers (8.064MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
(scsi0:A:0): 8.064MB/s transfers (8.064MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 20, offset 7f
(scsi0:A:0:0): Received SDTR period 20, offset 3f
Filtered to period 20, offset 3f
(scsi0:A:0): 15.624MB/s transfers (7.812MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
(scsi0:A:0): 7.812MB/s transfers (7.812MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 21, offset 7f
(scsi0:A:0:0): Received SDTR period 21, offset 3f
Filtered to period 21, offset 3f
(scsi0:A:0): 15.150MB/s transfers (7.575MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
(scsi0:A:0): 7.575MB/s transfers (7.575MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 22, offset 7f
(scsi0:A:0:0): Received SDTR period 22, offset 3f
Filtered to period 22, offset 3f
(scsi0:A:0): 14.704MB/s transfers (7.352MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
(scsi0:A:0): 7.352MB/s transfers (7.352MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 23, offset 7f
(scsi0:A:0:0): Received SDTR period 23, offset 3f
Filtered to period 23, offset 3f
(scsi0:A:0): 14.284MB/s transfers (7.142MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
(scsi0:A:0): 7.142MB/s transfers (7.142MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 24, offset 7f
(scsi0:A:0:0): Received SDTR period 24, offset 3f
Filtered to period 24, offset 3f
(scsi0:A:0): 13.888MB/s transfers (6.944MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
(scsi0:A:0): 6.944MB/s transfers (6.944MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 25, offset 7f
(scsi0:A:0:0): Received SDTR period 25, offset 3f
Filtered to period 25, offset 3f
(scsi0:A:0): 13.512MB/s transfers (6.756MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
(scsi0:A:0): 6.756MB/s transfers (6.756MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 26, offset 7f
(scsi0:A:0:0): Received SDTR period 26, offset 3f
Filtered to period 26, offset 3f
(scsi0:A:0): 13.156MB/s transfers (6.578MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
(scsi0:A:0): 6.578MB/s transfers (6.578MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 27, offset 7f
(scsi0:A:0:0): Received SDTR period 27, offset 3f
Filtered to period 27, offset 3f
(scsi0:A:0): 12.820MB/s transfers (6.410MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
(scsi0:A:0): 6.410MB/s transfers (6.410MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 28, offset 7f
(scsi0:A:0:0): Received SDTR period 28, offset 3f
Filtered to period 28, offset 3f
(scsi0:A:0): 12.500MB/s transfers (6.250MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
(scsi0:A:0): 6.250MB/s transfers (6.250MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 29, offset 7f
(scsi0:A:0:0): Received SDTR period 29, offset 3f
Filtered to period 29, offset 3f
(scsi0:A:0): 12.194MB/s transfers (6.097MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
(scsi0:A:0): 6.097MB/s transfers (6.097MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 2a, offset 7f
(scsi0:A:0:0): Received SDTR period 2a, offset 3f
Filtered to period 2a, offset 3f
(scsi0:A:0): 11.904MB/s transfers (5.952MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
(scsi0:A:0): 5.952MB/s transfers (5.952MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 2b, offset 7f
(scsi0:A:0:0): Received SDTR period 2b, offset 3f
Filtered to period 2b, offset 3f
(scsi0:A:0): 11.626MB/s transfers (5.813MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
(scsi0:A:0): 5.813MB/s transfers (5.813MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 2c, offset 7f
(scsi0:A:0:0): Received SDTR period 2c, offset 3f
Filtered to period 2c, offset 3f
(scsi0:A:0): 11.362MB/s transfers (5.681MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.681MB/s transfers (5.681MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 2d, offset 7f
(scsi0:A:0:0): Received SDTR period 2d, offset 3f
Filtered to period 2d, offset 3f
(scsi0:A:0): 11.110MB/s transfers (5.555MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.555MB/s transfers (5.555MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 2e, offset 7f
(scsi0:A:0:0): Received SDTR period 2e, offset 3f
Filtered to period 2e, offset 3f
(scsi0:A:0): 10.868MB/s transfers (5.434MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.434MB/s transfers (5.434MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 2f, offset 7f
(scsi0:A:0:0): Received SDTR period 2f, offset 3f
Filtered to period 2f, offset 3f
(scsi0:A:0): 10.638MB/s transfers (5.319MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.319MB/s transfers (5.319MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 30, offset 7f
(scsi0:A:0:0): Received SDTR period 30, offset 3f
Filtered to period 30, offset 3f
(scsi0:A:0): 10.416MB/s transfers (5.208MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.208MB/s transfers (5.208MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 31, offset 7f
(scsi0:A:0:0): Received SDTR period 31, offset 3f
Filtered to period 31, offset 3f
(scsi0:A:0): 10.204MB/s transfers (5.102MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.102MB/s transfers (5.102MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending SDTR period 32, offset 7f
(scsi0:A:0:0): Received SDTR period 32, offset 3f
Filtered to period 32, offset 3f
(scsi0:A:0): 10.000MB/s transfers (5.000MHz, offset 63, 16bit)
scsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
(scsi0:A:0): 5.000MB/s transfers (5.000MHz, offset 63)
scsi0: target 0 using 8bit transfers
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using asynchronous transfers
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0:0): Sending WDTR 1
(scsi0:A:0:0): Received WDTR 1 filtered to 1
(scsi0:A:0): 3.300MB/s transfers
scsi0: target 0 using 8bit transfers
scsi0: Slave Destroy 0
scsi0: Slave Alloc 1
scsi0: Slave Destroy 1
scsi0: Slave Alloc 2
scsi0: Slave Destroy 2
scsi0: Slave Alloc 3
scsi0: Slave Destroy 3
scsi0: Slave Alloc 4
scsi0: Slave Destroy 4
scsi0: Slave Alloc 5
scsi0: Slave Destroy 5
scsi0: Slave Alloc 6
scsi0: Slave Destroy 6
scsi0: Slave Alloc 8
scsi0: Slave Destroy 8
scsi0: Slave Alloc 9
scsi0: Slave Destroy 9
scsi0: Slave Alloc 10
scsi0: Slave Destroy 10
scsi0: Slave Alloc 11
scsi0: Slave Destroy 11
scsi0: Slave Alloc 12
scsi0: Slave Destroy 12
scsi0: Slave Alloc 13
scsi0: Slave Destroy 13
scsi0: Slave Alloc 14
scsi0: Slave Destroy 14
scsi0: Slave Alloc 15
scsi0: Slave Destroy 15
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 2 devices found
VFS: Cannot open root device "803" or unknown-block(8,3)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(8,3)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:34 EST