In response to some early feedback:
If you test this driver and it doesn't work, please include the output
from dmesg in your bug report (trace is enabled by default).
If it does work, currently it is logging 2 lines for each request, which
means it will be pretty slow if you are using syslogd/klogd.
So when your array is detected and you can mount a partition, please
remove this excessive trace by removing the following line from
drivers/ide/raid/medley.c:
#define DEBUGGING_MEDLEY 0
It is not enough to set the value to 0 you need to remove or comment out
that line altogether to remove the trace (my mistake).
I will post minor updates to the driver on http://infowares.com/linux
// Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:18 EST