Re: libata driver update posted

From: Jeff Garzik (
Date: Sat Jul 19 2003 - 21:51:49 EST

James H. Cloos Jr. wrote:
> 00:1f.1 Class 0101: 8086:244a (rev 03)
> Subsystem: 8086:4541
> Flags: bus master, medium devsel, latency 0
> I/O ports at bfa0 [size=16]
> root=/dev/sda3 failed to find the root fs.
> Is my controller among the supported PIIX/ICH PATA chipsets?

Yes, all you need to do is add another PCI id for your chipset to

+ { 0x8086, 0x244a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata },

Once I add cable detection (PATA is currently limited to UDMA/33), this
PCI ID entry will change slightly, but the above should get you going.

Note again that ATAPI isn't supported yet...


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:39 EST