My fault : I was testing 2 matrox cards and the one in the box was a
mystique...
--- Cheers Jean-LucOn 15.07.2003 21:35, Jean-Luc Coulon (f5ibh) wrote: > Hi, > > I've a Matrox Millenium card and I want to run the framebuffer. > I've set the following configuration : > > # Frame-buffer support > # > CONFIG_FB=y > CONFIG_DUMMY_CONSOLE=y > # CONFIG_FB_RIVA is not set > # CONFIG_FB_CLGEN is not set > # CONFIG_FB_PM2 is not set > # CONFIG_FB_PM3 is not set > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_VESA is not set > # CONFIG_FB_VGA16 is not set > # CONFIG_FB_HGA is not set > CONFIG_VIDEO_SELECT=y > CONFIG_FB_MATROX=y > CONFIG_FB_MATROX_MILLENIUM=y > # CONFIG_FB_MATROX_MYSTIQUE is not set > # CONFIG_FB_MATROX_G450 is not set > # CONFIG_FB_MATROX_G100A is not set > CONFIG_FB_MATROX_PROC=m > # CONFIG_FB_MATROX_MULTIHEAD is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_RADEON is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_INTEL is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_VIRTUAL is not set > CONFIG_FBCON_ADVANCED=y > CONFIG_FBCON_MFB=y > # CONFIG_FBCON_CFB2 is not set > # CONFIG_FBCON_CFB4 is not set > CONFIG_FBCON_CFB8=y > CONFIG_FBCON_CFB16=y > CONFIG_FBCON_CFB24=y > CONFIG_FBCON_CFB32=y > # CONFIG_FBCON_AFB is not set > # CONFIG_FBCON_ILBM is not set > # CONFIG_FBCON_IPLAN2P2 is not set > # CONFIG_FBCON_IPLAN2P4 is not set > # CONFIG_FBCON_IPLAN2P8 is not set > # CONFIG_FBCON_MAC is not set > > > And I pass the parameter video=matrox to the kernel. > I tried video=matrox:vesa=<something> without any success. > > Here are the boot lines from dmesg : > > [root@tangerine] /usr/src/linux/drivers/video/matrox # dmesg | more > Linux version 2.4.21 (root@tangerine) (version gcc 3.3.1 20030626 > (Debian prerel > ease)) #1 mar jui 15 18:40:01 CEST 2003 matroxfb_Ti3026.c > BIOS-provided physical RAM map:50.h matroxfb_Ti3026.h > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)s > matroxfb_base.c BIOS-e820: 0000000000100000 - 0000000017ffc000 > (usable)ess /boot/ > config > BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data) > BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)s /boot/ > config-2.4.21 BIOS-e820: 00000000ffff0000 - 0000000100000000 > (reserved) > 383MB LOWMEM available. > On node 0 totalpages: 98300 > zone(0): 4096 pages. > zone(1): 94204 pages. > zone(2): 0 pages. > Kernel command line: root=/dev/hda2 reboot=warm hdc=ide-scsi hdd=ide- > scsi pci=bi > osirq video=matrox > ide_setup: hdc=ide-scsi > ide_setup: hdd=ide-scsi > Initializing CPU#0 > Detected 501.160 MHz processor. > Console: colour VGA+ 80x25 > > If I compile a vesa framebuffer, it works but not accelerated. > > --- > Regards > Jean-Luc > > ---------------------------------------------------------------------------- > Jean-Luc Coulon > 28 rue d'Evette > 90350 Evette-Salbert > FRANCE - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 15 2003 - 22:01:00 EST