Linux version 2.5.72 (root@lolek) (gcc version 3.3 (Debian)) #3 Thu Jun 19 12:44:13 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffea800 (usable) BIOS-e820: 000000001ffea800 - 0000000020000000 (reserved) BIOS-e820: 00000000feea0000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131050 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126954 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Dell Inspiron with broken BIOS detected. Refusing to enable the local APIC. ACPI: RSDP (v000 DELL ) @ 0x000fde50 ACPI: RSDT (v001 DELL CPi R 10195.00771) @ 0x000fde64 ACPI: FADT (v001 DELL CPi R 10195.00771) @ 0x000fde90 ACPI: DSDT (v001 INT430 SYSFexxx 00000.04097) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Building zonelist for node : 0 Kernel command line: root=/dev/hda6 ro resume=/dev/hda1 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 996.661 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1974.27 BogoMIPS Memory: 515420k/524200k available (1700k kernel code, 7992k reserved, 740k data, 152k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030522 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................................................................. Table [DSDT](id F004) - 363 Objects with 51 Devices 157 Methods 3 Regions ACPI Namespace successfully loaded at root c039c09c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0743 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000000828 on int 9 evgpeblk-0262 [08] ev_save_method_info : Registered GPE method _L0B as GPE number 0x0B evgpeblk-0743 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 000000000000082C on int 9 evgpeblk-0262 [08] ev_save_method_info : Registered GPE method _L1D as GPE number 0x1D evgpeblk-0262 [08] ev_save_method_info : Registered GPE method _L1C as GPE number 0x1C evgpeblk-0262 [08] ev_save_method_info : Registered GPE method _L18 as GPE number 0x18 Completing Region/Field/Buffer/Package initialization:................................................................. Initialized 3/3 Regions 10/10 Fields 24/24 Buffers 28/28 Packages (371 nodes) Executing all Device _STA and_INI methods:.................................................. 50 Devices found containing: 50 _STA, 3 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bri ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: Power Resource [PADA] (on) Linux Plug and Play Support v0.96 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver block request queues: 4/128 requests per read queue 4/128 requests per write queue enter congestion at 15 exit congestion at 17 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Enabling SEP on CPU 0 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Battery Slot [BAT1] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THM] (25 C) Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i815 Chipset, but could not find the secondary device. agpgart: Detected an Intel i815 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xe8000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2M: IDE controller at PCI slot 00:1f.1 ICH2M: chipset revision 3 ICH2M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio hda: IC25T048ATDA05-0, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: host protected area => 1 hda: 93759120 sectors (48005 MB) w/1806KiB Cache, CHS=93015/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 > end_request: I/O error, dev hdb, sector 0 hdb: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 mice: PS/2 mouse device common for all mice synaptics reset failed Synaptics Touchpad, model: 1 Firware: 5.7 180 degree mounted touchpad Sensor: 1 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: Synaptics Synaptics TouchPad on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.09 2003-Jan-22, 1 devices found ACPI: (supports S0 S1 S3 S4 S4bios S5) Resume Machine: resuming from /dev/hda1 Resuming from device hda1 Resume Machine: This is normal swap space VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 152k freed Adding 546168k swap on /dev/ide/host0/bus0/target0/lun0/part1. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Setting latency timer of device 00:1f.2 to 64 uhci-hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 0000:00:1f.2: irq 10, io base 0000bce0 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 hub 1-0:0: new USB device on port 1, assigned address 2 warning: process `update' used the obsolete bdflush system call Fix your initscripts? blk: queue c039ebbc, I/O limit 4095Mb (mask 0xffffffff) Linux Tulip driver version 1.1.13 (May 11, 2002) input: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on usb-00:1f.2-1 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver maestro3: enabled hack for 'Dell Inspiron 8100' Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Intel PCIC probe: not found. Intel PCIC probe: not found. unloading Kernel Card Services uhci-hcd 0000:00:1f.2: remove, state 3 usb usb1: USB disconnect, address 1 usb 1-1: USB disconnect, address 2 uhci-hcd 0000:00:1f.2: USB bus 1 deregistered drivers/usb/core/usb.c: deregistering driver hid drivers/usb/core/usb.c: deregistering driver usbfs drivers/usb/core/usb.c: deregistering driver hub