Vojtech Pavlik <vojtech@suse.cz> skrev:
> When I was saying drivers/input/serio/i8042.c, I
> meant that. NOT atkbd.c. Although that also does
> provide some info, it's not all of it.
Please excuse me, if was wasting your time here.
Indeed I had defined DEBUG in i8042.c but not
_before_ the inclusion of i8024.h. Damn.
Unfortunately scrolling is of course not possible, so
to see as much of the debug output from i8042 as
possible I had to undefine ATKBD_DEBUG in atkbd
again. This is what I can get now. Unfortunately this
device does not have a serial port, so serial console
is not an option.
I won't be able to get my hands on a USB keyboard
until Tuesday, but then I can send you the whole
output.
...
i8042.c: 60 -> i8042 (command) [18]
i8042.c: 02 -> i8042 (parameter) [18]
i8042.c: 92 -> i8042 (command) [18]
i8042.c: f2 -> i8042 (parameter) [18]
i8042.c: fa <- i8042 (interrupt, aux2, 12) [31]
i8042.c: 00 <- i8042 (interrupt, aux2, 12) [32]
i8042.c: 60 -> i8042 (command) [35]
i8042.c: 00 -> i8042 (parameter) [33]
serio: i8042 AUX2 port at 0x60,0x64 irq 12
i8042.c: 60 -> i8042 (command) [33]
i8042.c: 00 -> i8042 (parameter) [33]
i8042.c: 60 -> i8042 (command) [34]
i8042.c: 02 -> i8042 (parameter) [34]
i8042.c: 93 -> i8042 (command) [34]
i8042.c: f2 -> i8042 (parameter) [34]
i8042.c: fe <- i8042 (interrupt, aux3, 12) [36]
i8042.c: 93 -> i8042 (command) [36]
i8042.c: ed -> i8042 (command) [36]
i8042.c: fe <- i8042 (interrupt, aux3, 12) [37]
i8042.c: 60 -> i8042 (command) [37]
i8042.c: 00 -> i8042 (parameter) [37]
serio: i8042 AUX3 port at 0x60,0x64 irq 12
i8042.c: 60 -> i8042 (command) [37]
i8042.c: 00 -> i8042 (parameter) [37]
i8042.c: 60 -> i8042 (command) [38]
i8042.c: 01 -> i8042 (parameter) [38]
i8042.c: f2 -> i8042 (kbd-data) [38]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [40]
i8042.c: ab <- i8042 (interrupt, kbd, 1) [45]
i8042.c: 83 <- i8042 (interrupt, kbd, 1) [46]
i8042.c: ed -> (kbd-data) [46]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [47]
i8042.c: 00 -> (kbd-data) [47]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [49]
i8042.c: f8 -> (kbd-data) [49]
i8042.c: fe <- i8042 (interrupt, kbd, 1) [49]
i8042.c: f4 -> (kbd-data) [49]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [50]
i8042.c: f0 -> (kbd-data) [50]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [51]
i8042.c: 02 -> (kbd-data) [51]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [51]
i8042.c: f0 -> (kbd-data) [51]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [52]
i8042.c: 00 -> (kbd-data) [52]
i8042.c: fa <- i8042 (interrupt, kbd, 1) [53]
i8042.c: 02 <- i8042 (interrupt, kbd, 1) [54]
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
...
Thanks for your patience,
Terje
______________________________________________________
Få den nye Yahoo! Messenger på http://no.messenger.yahoo.com/
Nye ikoner og bakgrunner, webkamera med superkvalitet og dobbelt så morsom
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jun 30 2003 - 22:00:28 EST