hi jeff
cleans up strip.c not to allocate struct net_device as part of the private
structure. use a separate kmalloc (and kfree). compile tested only.
against 2.5.73-bk
-daniel
--- 1.12/drivers/net/wireless/strip.c Thu Apr 24 14:25:35 2003
+++ edited/strip.c Thu Jun 26 22:52:32 2003
@@ -284,7 +284,7 @@
*/
struct tty_struct *tty; /* ptr to TTY structure */
- struct net_device dev; /* Our device structure */
+ struct net_device *dev; /* Our device structure */
/*
* Neighbour radio records
@@ -509,7 +509,7 @@
*p++ = '\"';
*p++ = 0;
- printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev.name, msg, pkt_text);
+ printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text);
}
@@ -846,7 +846,7 @@
static int allocate_buffers(struct strip *strip_info)
{
- struct net_device *dev = &strip_info->dev;
+ struct net_device *dev = strip_info->dev;
int sx_size = MAX(STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096);
int tx_size = STRIP_ENCAP_SIZE(dev->mtu) + MaxCommandStringLength;
__u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC);
@@ -881,7 +881,7 @@
static void strip_changedmtu(struct strip *strip_info)
{
int old_mtu = strip_info->mtu;
- struct net_device *dev = &strip_info->dev;
+ struct net_device *dev = strip_info->dev;
unsigned char *orbuff = strip_info->rx_buff;
unsigned char *osbuff = strip_info->sx_buff;
unsigned char *otbuff = strip_info->tx_buff;
@@ -889,14 +889,14 @@
if (dev->mtu > MAX_SEND_MTU) {
printk(KERN_ERR
"%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
- strip_info->dev.name, MAX_SEND_MTU);
+ strip_info->dev->name, MAX_SEND_MTU);
dev->mtu = old_mtu;
return;
}
if (!allocate_buffers(strip_info)) {
printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n",
- strip_info->dev.name);
+ strip_info->dev->name);
dev->mtu = old_mtu;
return;
}
@@ -923,7 +923,7 @@
strip_info->tx_head = strip_info->tx_buff;
printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
- strip_info->dev.name, old_mtu, strip_info->mtu);
+ strip_info->dev->name, old_mtu, strip_info->mtu);
if (orbuff)
kfree(orbuff);
@@ -940,7 +940,7 @@
*/
strip_info->idle_timer.expires = jiffies + 1 * HZ;
add_timer(&strip_info->idle_timer);
- netif_wake_queue(&strip_info->dev);
+ netif_wake_queue(strip_info->dev);
}
@@ -1087,10 +1087,10 @@
FirmwareVersion firmware_version = strip_info->firmware_version;
SerialNumber serial_number = strip_info->serial_number;
BatteryVoltage battery_voltage = strip_info->battery_voltage;
- char *if_name = strip_info->dev.name;
+ char *if_name = strip_info->dev->name;
MetricomAddress true_dev_addr = strip_info->true_dev_addr;
MetricomAddress dev_dev_addr =
- *(MetricomAddress *) strip_info->dev.dev_addr;
+ *(MetricomAddress *) strip_info->dev->dev_addr;
int manual_dev_addr = strip_info->manual_dev_addr;
#ifdef EXT_COUNTERS
unsigned long rx_bytes = strip_info->rx_bytes;
@@ -1133,7 +1133,7 @@
p += sprintf(p, " Next gratuitous ARP:\t");
if (!memcmp
- (strip_info->dev.dev_addr, zero_address.c,
+ (strip_info->dev->dev_addr, zero_address.c,
sizeof(zero_address)))
p += sprintf(p, "Disabled\n");
else {
@@ -1210,7 +1210,7 @@
*/
if (strip_info->working) {
printk(KERN_INFO "%s: No response: Resetting radio.\n",
- strip_info->dev.name);
+ strip_info->dev->name);
strip_info->firmware_version.c[0] = '\0';
strip_info->serial_number.c[0] = '\0';
strip_info->battery_voltage.c[0] = '\0';
@@ -1231,7 +1231,7 @@
/* Mark radio address as unknown */
*(MetricomAddress *) & strip_info->true_dev_addr = zero_address;
if (!strip_info->manual_dev_addr)
- *(MetricomAddress *) strip_info->dev.dev_addr =
+ *(MetricomAddress *) strip_info->dev->dev_addr =
zero_address;
strip_info->working = FALSE;
strip_info->firmware_level = NoStructure;
@@ -1285,7 +1285,7 @@
/* First make sure we're connected. */
if (!strip_info || strip_info->magic != STRIP_MAGIC ||
- !netif_running(&strip_info->dev))
+ !netif_running(strip_info->dev))
return;
if (strip_info->tx_left > 0) {
@@ -1340,14 +1340,14 @@
else {
printk(KERN_ERR
"%s: strip_make_packet: Unknown packet type 0x%04X\n",
- strip_info->dev.name, ntohs(header->protocol));
+ strip_info->dev->name, ntohs(header->protocol));
return (NULL);
}
if (len > strip_info->mtu) {
printk(KERN_ERR
"%s: Dropping oversized transmit packet: %d bytes\n",
- strip_info->dev.name, len);
+ strip_info->dev->name, len);
return (NULL);
}
@@ -1357,7 +1357,7 @@
*/
if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) {
printk(KERN_ERR "%s: Dropping packet addressed to self\n",
- strip_info->dev.name);
+ strip_info->dev->name);
return (NULL);
}
@@ -1367,7 +1367,7 @@
*/
if (haddr.c[0] == 0xFF) {
u32 brd = 0;
- struct in_device *in_dev = in_dev_get(&strip_info->dev);
+ struct in_device *in_dev = in_dev_get(strip_info->dev);
if (in_dev == NULL)
return NULL;
read_lock(&in_dev->lock);
@@ -1377,10 +1377,10 @@
in_dev_put(in_dev);
/* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
- if (!arp_query(haddr.c, brd, &strip_info->dev)) {
+ if (!arp_query(haddr.c, brd, strip_info->dev)) {
printk(KERN_ERR
"%s: Unable to send packet (no broadcast hub configured)\n",
- strip_info->dev.name);
+ strip_info->dev->name);
return (NULL);
}
/*
@@ -1491,7 +1491,7 @@
#endif
strip_info->watchdog_doprobe = jiffies + 10 * HZ;
strip_info->watchdog_doreset = jiffies + 1 * HZ;
- /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev.name); */
+ /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
}
/*
@@ -1506,7 +1506,7 @@
*/
if (strip_info->tx_size - strip_info->tx_left < 20)
printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n",
- strip_info->dev.name, strip_info->tx_left,
+ strip_info->dev->name, strip_info->tx_left,
strip_info->tx_size - strip_info->tx_left);
/*
@@ -1519,7 +1519,7 @@
}
if (1) {
- struct in_device *in_dev = in_dev_get(&strip_info->dev);
+ struct in_device *in_dev = in_dev_get(strip_info->dev);
brd = addr = 0;
if (in_dev) {
read_lock(&in_dev->lock);
@@ -1549,11 +1549,11 @@
*/
if (strip_info->working
&& (long) jiffies - strip_info->gratuitous_arp >= 0
- && memcmp(strip_info->dev.dev_addr, zero_address.c,
+ && memcmp(strip_info->dev->dev_addr, zero_address.c,
sizeof(zero_address))
- && arp_query(haddr.c, brd, &strip_info->dev)) {
+ && arp_query(haddr.c, brd, strip_info->dev)) {
/*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
- strip_info->dev.name, strip_info->arp_interval / HZ); */
+ strip_info->dev->name, strip_info->arp_interval / HZ); */
strip_info->gratuitous_arp =
jiffies + strip_info->arp_interval;
strip_info->arp_interval *= 2;
@@ -1561,11 +1561,11 @@
strip_info->arp_interval = MaxARPInterval;
if (addr)
arp_send(ARPOP_REPLY, ETH_P_ARP, addr, /* Target address of ARP packet is our address */
- &strip_info->dev, /* Device to send packet on */
+ strip_info->dev, /* Device to send packet on */
addr, /* Source IP address this ARP packet comes from */
NULL, /* Destination HW address is NULL (broadcast it) */
- strip_info->dev.dev_addr, /* Source HW address is our HW address */
- strip_info->dev.dev_addr); /* Target HW address is our HW address (redundant) */
+ strip_info->dev->dev_addr, /* Source HW address is our HW address */
+ strip_info->dev->dev_addr); /* Target HW address is our HW address (redundant) */
}
/*
@@ -1608,18 +1608,18 @@
if (rx_pps_count / 8 >= 10)
printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n",
- strip_info->dev.name, rx_pps_count / 8);
+ strip_info->dev->name, rx_pps_count / 8);
if (tx_pps_count / 8 >= 10)
printk(KERN_INFO "%s: WARNING: Tx %ld packets per second.\n",
- strip_info->dev.name, tx_pps_count / 8);
+ strip_info->dev->name, tx_pps_count / 8);
if (sx_pps_count / 8 >= 10)
printk(KERN_INFO "%s: WARNING: Sending %ld packets per second.\n",
- strip_info->dev.name, sx_pps_count / 8);
+ strip_info->dev->name, sx_pps_count / 8);
}
spin_lock_irqsave(&strip_lock, flags);
/* See if someone has been ifconfigging */
- if (strip_info->mtu != strip_info->dev.mtu)
+ if (strip_info->mtu != strip_info->dev->mtu)
strip_changedmtu(strip_info);
strip_send(strip_info, skb);
@@ -1735,7 +1735,7 @@
len = MIN(len, sizeof(FirmwareVersion) - 1);
if (strip_info->firmware_version.c[0] == 0)
printk(KERN_INFO "%s: Radio Firmware: %.*s\n",
- strip_info->dev.name, len, value_begin);
+ strip_info->dev->name, len, value_begin);
sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin);
/* Look for the first colon */
@@ -1806,10 +1806,10 @@
MetricomAddressString addr_string;
radio_address_to_string(&addr, &addr_string);
printk(KERN_INFO "%s: Radio address = %s\n",
- strip_info->dev.name, addr_string.c);
+ strip_info->dev->name, addr_string.c);
strip_info->true_dev_addr = addr;
if (!strip_info->manual_dev_addr)
- *(MetricomAddress *) strip_info->dev.dev_addr =
+ *(MetricomAddress *) strip_info->dev->dev_addr =
addr;
/* Give the radio a few seconds to get its head straight, then send an arp */
strip_info->gratuitous_arp = jiffies + 15 * HZ;
@@ -1830,7 +1830,7 @@
if (sum == 0 && strip_info->firmware_level == StructuredMessages) {
strip_info->firmware_level = ChecksummedMessages;
printk(KERN_INFO "%s: Radio provides message checksums\n",
- strip_info->dev.name);
+ strip_info->dev->name);
}
return (sum == 0);
}
@@ -1849,7 +1849,7 @@
if (has_prefix(msg, len, "001")) { /* Not in StarMode! */
RecvErr("Error Msg:", strip_info);
printk(KERN_INFO "%s: Radio %s is not in StarMode\n",
- strip_info->dev.name, sendername);
+ strip_info->dev->name, sendername);
}
else if (has_prefix(msg, len, "002")) { /* Remap handle */
@@ -1859,7 +1859,7 @@
else if (has_prefix(msg, len, "003")) { /* Can't resolve name */
RecvErr("Error Msg:", strip_info);
printk(KERN_INFO "%s: Destination radio name is unknown\n",
- strip_info->dev.name);
+ strip_info->dev->name);
}
else if (has_prefix(msg, len, "004")) { /* Name too small or missing */
@@ -1876,7 +1876,7 @@
if (!strip_info->working) {
strip_info->working = TRUE;
printk(KERN_INFO "%s: Radio now in starmode\n",
- strip_info->dev.name);
+ strip_info->dev->name);
/*
* If the radio has just entered a working state, we should do our first
* probe ASAP, so that we find out our radio address etc. without delay.
@@ -1888,7 +1888,7 @@
strip_info->next_command = 0; /* Try to enable checksums ASAP */
printk(KERN_INFO
"%s: Radio provides structured messages\n",
- strip_info->dev.name);
+ strip_info->dev->name);
}
if (strip_info->firmware_level >= StructuredMessages) {
/*
@@ -1916,14 +1916,14 @@
RecvErr("Error Msg:", strip_info);
printk(KERN_ERR
"%s: Error! Packet size too big for radio.\n",
- strip_info->dev.name);
+ strip_info->dev->name);
}
else if (has_prefix(msg, len, "008")) { /* Bad character in name */
RecvErr("Error Msg:", strip_info);
printk(KERN_ERR
"%s: Radio name contains illegal character\n",
- strip_info->dev.name);
+ strip_info->dev->name);
}
else if (has_prefix(msg, len, "009")) /* No count or line terminator */
@@ -1994,7 +1994,7 @@
/* real radio hardware address, try to find another strip device that has been */
/* manually set to that address that we can 'transfer ownership' of this packet to */
if (strip_info->manual_dev_addr &&
- !memcmp(strip_info->dev.dev_addr, zero_address.c,
+ !memcmp(strip_info->dev->dev_addr, zero_address.c,
sizeof(zero_address))
&& memcmp(&strip_info->true_dev_addr, zero_address.c,
sizeof(zero_address))) {
@@ -2002,13 +2002,13 @@
read_lock_bh(&dev_base_lock);
dev = dev_base;
while (dev) {
- if (dev->type == strip_info->dev.type &&
+ if (dev->type == strip_info->dev->type &&
!memcmp(dev->dev_addr,
&strip_info->true_dev_addr,
sizeof(MetricomAddress))) {
printk(KERN_INFO
"%s: Transferred packet ownership to %s.\n",
- strip_info->dev.name, dev->name);
+ strip_info->dev->name, dev->name);
read_unlock_bh(&dev_base_lock);
return (dev);
}
@@ -2016,7 +2016,7 @@
}
read_unlock_bh(&dev_base_lock);
}
- return (&strip_info->dev);
+ return (strip_info->dev);
}
/*
@@ -2029,7 +2029,7 @@
struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen);
if (!skb) {
printk(KERN_ERR "%s: memory squeeze, dropping packet.\n",
- strip_info->dev.name);
+ strip_info->dev->name);
strip_info->rx_dropped++;
} else {
memcpy(skb_put(skb, sizeof(STRIP_Header)), header,
@@ -2073,12 +2073,12 @@
if (packetlen > MAX_RECV_MTU) {
printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n",
- strip_info->dev.name, packetlen);
+ strip_info->dev->name, packetlen);
strip_info->rx_dropped++;
return;
}
- /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev.name, packetlen); */
+ /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */
/* Decode remainder of the IP packet */
ptr =
@@ -2117,13 +2117,13 @@
if (packetlen > MAX_RECV_MTU) {
printk(KERN_INFO
"%s: Dropping oversized received ARP packet: %d bytes\n",
- strip_info->dev.name, packetlen);
+ strip_info->dev->name, packetlen);
strip_info->rx_dropped++;
return;
}
/*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
- strip_info->dev.name, packetlen,
+ strip_info->dev->name, packetlen,
ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */
/* Decode remainder of the ARP packet */
@@ -2251,7 +2251,7 @@
}
}
- /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev.name, sendername); */
+ /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */
/*
* Fill in (pseudo) source and destination addresses in the packet.
@@ -2320,13 +2320,13 @@
unsigned long flags;
if (!strip_info || strip_info->magic != STRIP_MAGIC
- || !netif_running(&strip_info->dev))
+ || !netif_running(strip_info->dev))
return;
spin_lock_irqsave(&strip_lock, flags);
/* Argh! mtu change time! - costs us the packet part received at the change */
- if (strip_info->mtu != strip_info->dev.mtu)
+ if (strip_info->mtu != strip_info->dev->mtu)
strip_changedmtu(strip_info);
#if 0
@@ -2347,7 +2347,7 @@
while (cp < end) {
if (fp && *fp)
printk(KERN_INFO "%s: %s on serial port\n",
- strip_info->dev.name, TTYERROR(*fp));
+ strip_info->dev->name, TTYERROR(*fp));
if (fp && *fp++ && !strip_info->discard) { /* If there's a serial error, record it */
/* If we have some characters in the buffer, discard them */
strip_info->discard = strip_info->sx_count;
@@ -2360,7 +2360,7 @@
if (strip_info->sx_count > 3000)
printk(KERN_INFO
"%s: Cut a %d byte packet (%d bytes remaining)%s\n",
- strip_info->dev.name,
+ strip_info->dev->name,
strip_info->sx_count,
end - cp - 1,
strip_info->
@@ -2371,12 +2371,12 @@
strip_info->rx_over_errors++;
printk(KERN_INFO
"%s: sx_buff overflow (%d bytes total)\n",
- strip_info->dev.name,
+ strip_info->dev->name,
strip_info->sx_count);
} else if (strip_info->discard)
printk(KERN_INFO
"%s: Discarding bad packet (%d/%d)\n",
- strip_info->dev.name,
+ strip_info->dev->name,
strip_info->discard,
strip_info->sx_count);
else
@@ -2415,9 +2415,9 @@
memcmp(addr->c, broadcast_address.c,
sizeof(broadcast_address));
if (strip_info->manual_dev_addr)
- *(MetricomAddress *) strip_info->dev.dev_addr = *addr;
+ *(MetricomAddress *) strip_info->dev->dev_addr = *addr;
else
- *(MetricomAddress *) strip_info->dev.dev_addr =
+ *(MetricomAddress *) strip_info->dev->dev_addr =
strip_info->true_dev_addr;
return 0;
}
@@ -2496,7 +2496,7 @@
strip_info->user_baud = get_baud(strip_info->tty);
printk(KERN_INFO "%s: Initializing Radio.\n",
- strip_info->dev.name);
+ strip_info->dev->name);
ResetRadio(strip_info);
strip_info->idle_timer.expires = jiffies + 1 * HZ;
add_timer(&strip_info->idle_timer);
@@ -2589,6 +2589,8 @@
if (strip_info->next)
strip_info->next->referrer = strip_info->referrer;
strip_info->magic = 0;
+ if (strip_info->dev)
+ kfree(strip_info->dev);
kfree(strip_info);
}
@@ -2600,6 +2602,7 @@
{
int channel_id = 0;
struct strip **s = &struct_strip_list;
+ struct net_device *dev;
struct strip *strip_info = (struct strip *)
kmalloc(sizeof(struct strip), GFP_KERNEL);
@@ -2612,13 +2615,22 @@
memset(strip_info, 0, sizeof(struct strip));
+ /* allocate the net_device */
+ dev = kmalloc(sizeof(struct net_device), GFP_KERNEL);
+ if (!dev) {
+ kfree(strip_info);
+ return NULL;
+ }
+ strip_info->dev = dev;
+ SET_MODULE_OWNER(dev);
+
/*
* Search the list to find where to put our new entry
* (and in the process decide what channel number it is
* going to be)
*/
- while (*s && (*s)->dev.base_addr == channel_id) {
+ while (*s && (*s)->dev->base_addr == channel_id) {
channel_id++;
s = &(*s)->next;
}
@@ -2639,15 +2651,15 @@
strip_info->gratuitous_arp = jiffies + LongTime;
strip_info->arp_interval = 0;
init_timer(&strip_info->idle_timer);
- strip_info->idle_timer.data = (long) &strip_info->dev;
+ strip_info->idle_timer.data = (long) dev;
strip_info->idle_timer.function = strip_IdleTask;
/* Note: strip_info->if_name is currently 8 characters long */
- sprintf(strip_info->dev.name, "st%d", channel_id);
- strip_info->dev.base_addr = channel_id;
- strip_info->dev.priv = (void *) strip_info;
- strip_info->dev.next = NULL;
- strip_info->dev.init = strip_dev_init;
+ sprintf(dev->name, "st%d", channel_id);
+ dev->base_addr = channel_id;
+ dev->priv = (void *) strip_info;
+ dev->next = NULL;
+ dev->init = strip_dev_init;
return strip_info;
}
@@ -2682,7 +2694,7 @@
* strip_dev_init() will be called as a side-effect
*/
- if (register_netdev(&strip_info->dev) != 0) {
+ if (register_netdev(strip_info->dev) != 0) {
printk(KERN_ERR "strip: register_netdev() failed.\n");
strip_free(strip_info);
return -ENFILE;
@@ -2699,7 +2711,7 @@
* Restore default settings
*/
- strip_info->dev.type = ARPHRD_METRICOM; /* dtang */
+ strip_info->dev->type = ARPHRD_METRICOM; /* dtang */
/*
* Set tty options
@@ -2709,15 +2721,13 @@
tty->termios->c_cflag |= CLOCAL; /* Ignore modem control signals. */
tty->termios->c_cflag &= ~HUPCL; /* Don't close on hup */
- MOD_INC_USE_COUNT;
-
printk(KERN_INFO "STRIP: device \"%s\" activated\n",
- strip_info->dev.name);
+ strip_info->dev->name);
/*
* Done. We have linked the TTY line to a channel.
*/
- return (strip_info->dev.base_addr);
+ return (strip_info->dev->base_addr);
}
/*
@@ -2738,15 +2748,14 @@
if (!strip_info || strip_info->magic != STRIP_MAGIC)
return;
- unregister_netdev(&strip_info->dev);
+ unregister_netdev(strip_info->dev);
tty->disc_data = 0;
strip_info->tty = NULL;
printk(KERN_INFO "STRIP: device \"%s\" closed down\n",
- strip_info->dev.name);
+ strip_info->dev->name);
strip_free(strip_info);
tty->disc_data = NULL;
- MOD_DEC_USE_COUNT;
}
@@ -2767,13 +2776,13 @@
switch (cmd) {
case SIOCGIFNAME:
- if(copy_to_user((void *) arg, strip_info->dev.name, strlen(strip_info->dev.name) + 1))
+ if(copy_to_user((void *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1))
return -EFAULT;
break;
case SIOCSIFHWADDR:
{
MetricomAddress addr;
- //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev.name);
+ //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
if(copy_from_user(&addr, (void *) arg, sizeof(MetricomAddress)))
return -EFAULT;
return set_mac_address(strip_info, &addr);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jun 30 2003 - 22:00:25 EST