capifs: Rev 1.1.4.1 CAPI-driver Rev 1.1.4.1: loaded capi20: started up with major 68 kcapi: capi20 attached capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs) CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded kcapi: capidrv attached kcapi: appl 1 up capidrv: Rev 1.1.4.1: loaded b1: revision 1.1.4.1 b1isa: revision 1.1.4.1 kcapi: driver b1isa attached kcapi: Controller 1: b1isa-150 attached b1isa: AVM B1 ISA at i/o 0x150, irq 5, revision 255 b1isa-150: card 1 "B1" ready. b1isa-150: card 1 Protocol: DSS1 b1isa-150: card 1 Linetype: point to multipoint b1isa-150: B1-card (3.09-10) now active kcapi: card 1 "b1isa-150" ready. kcapi: notify up contr 1 capidrv: controller 1 up capidrv-1: now up (2 B channels) capidrv-1: D2 trace enabled capi: controller 1 up kcapi: appl 2 up capidrv-1: incoming call 2663919395,1,2,919394 capidrv-1: patching si2=2 to 0 for VBOX isdn_net: call from 2663919395 -> 0 919394 ignored isdn_tty: call from 2663919395 -> 919394 ignored capidrv-1: incoming call 2663919395,1,0,919394 ignored kcapi: appl 2 ncci 0x10101 up kcapi: appl 2 ncci 0x10101 down kcapi: recv_handler: applid 2 is releasing kcapi: appl 2 down kcapi: recv_handler: applid 2 has no signal function Warning: kfree_skb passed an skb still on a list (from d88aff73). kernel BUG at skbuff.c:315! invalid operand: 0000 CPU: 0 EIP: 0010:[] Not tainted EFLAGS: 00010282 eax: 00000045 ebx: d7d463b8 ecx: 00000001 edx: d79bc000 esi: d7d463b8 edi: 00000080 ebp: 00000046 esp: c02ddef0 ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 0, stackpage=c02dd000) Stack: c028bb80 d88aff73 d7d463b8 00000002 d88aff73 d7d463b8 00000002 c0120afd c02ddf24 c02ddf24 fffffffe c011d64a 00000000 d88b6844 d88b6844 00000000 c02f6b60 c012064d c029fae0 c011d582 c011d496 00000009 00000001 c011d2d5 Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] Code: 0f 0b 3b 01 c7 ad 28 c0 8b 5c 24 14 e9 ce fe ff ff 8d 74 26 <0>Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing <6>keyboard: unknown scancode e0 64