Re: SiI3112 (Adaptec 1210SA): no devices

From: Hugo Mills (hugo-lkml@carfax.org.uk)
Date: Thu Jun 05 2003 - 16:04:06 EST

On Thu, Jun 05, 2003 at 04:13:38PM -0400, Alan Cox wrote:
> > I've just taken delivery of a shiny new Adaptec 1210SA Serial-ATA
> > adapter and a 120Gb Seagate Barracuda native SATA drive. Problem is,
> > the kernel driver doesn't seem to notice this device on boot --
>
> Its not a PCI identifier I've ever seen before
>
> > 00:0b.0 RAID bus controller: CMD Technology Inc: Unknown device 0240 (rev 02) (prog-if 01)
>
> So its some kind of CMD now SIS device, either an SI680 or SI3112 with a
> weird PCI ID

   The chip is a SiI3112 -- you can just see the start of the SiI logo
under the Adaptec sticker on it...

   The ID appears in drivers/pci/pci.ids.

> Does it have any option to put it into non raid mode in its bios ?

   As far as I can tell, it's in non-raid mode. I can only afford the
one drive. :)

   Hugo. 

-- 
=== Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
  PGP key: 1C335860 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
        --- Great oxymorons of the world, no. 2: Common Sense ---
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Sat Jun 07 2003 - 22:00:28 EST