2.4.21-rc5-ac2, kernel BUG at ide-iops.c:1262 (burning CD on IBM T30)
From: Scott McDermott (vaxerdec@frontiernet.net)
Date: Fri May 30 2003 - 01:48:24 EST
While trying to use xcdroast with my IBM T30's CD-RW drive, I get about
99% done, then there is a long pause, followed by:
scsi: aborting command due to timeout: pid 2581, scsi0, channel 0, id0, lun 0 Test Unit Ready 00 00 00 00 00
SCSI host 0 abort (pid 2581) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
then I get blinking LEDs and the machine locks up (although sysrq
appears to still work)
the following BUG is emitted on the console:
Code: 0f 0b ee 04 9e 64 26 c0 80 bf fd 00 00 00 20 74 0c 8b 74 24
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
ksymoops 2.4.9 on i686 2.4.21+rc5+ac2+benh-041103. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.21+rc5+ac2+benh-041103/ (default)
-m /usr/src/linux/System.map (specified)
kernel BUG at ide-iops.c:1262!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01c8d94>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010086
eax: e1873660 ebx: 00000000 ecx: 00000032 edx: 00000002
esi: deb3c600 edi: c02fe20c ebp: c02fe16c esp: c02bfec4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02bf000)
Stack: 00000046 0000002e 00000086 deb3c600 c1594280 00000082 00000000 deb3c600
00000000 debc7500 c01c8f97 c02f320c 00000000 e18748c9 c02fe20c e185ef5d
deb3c600 00000002 00000000 deb3c600 00000286 fffffffe 00000046 e185e3d5
Call Trace: [<c01c8f97>] [<e18748c9>] [<e185ef5d>] [<e185e3d5>] [<e185e360>]
[<c01214cb>] [<c011d0e2>] [<c011cff6>] [<c011ce35>] [<c02089ee>] [<c0105350>]
[<c0105000>] [<c010b058>] [<c0105350>] [<c0105350>] [<c0105000>] [<c0105373>]
[<c01053d4>]
Code: 0f 0b ee 04 9e 64 26 c0 80 bf fd 00 00 00 20 74 0c 8b 74 24
>>EIP; c01c8d94 <do_reset1+24/210> <=====
>>eax; e1873660 <[ide-scsi]idescsi_pc_intr+0/360>
>>esi; deb3c600 <_end+1e82f7b0/204f8210>
>>edi; c02fe20c <ide_hwifs+50c/2b98>
>>ebp; c02fe16c <ide_hwifs+46c/2b98>
>>esp; c02bfec4 <init_task_union+1ec4/2000>
Trace; c01c8f97 <ide_do_reset+17/20>
Trace; e18748c9 <[ide-scsi]idescsi_reset+19/20>
Trace; e185ef5d <[scsi_mod]scsi_reset+fd/350>
Trace; e185e3d5 <[scsi_mod]scsi_old_times_out+75/140>
Trace; e185e360 <[scsi_mod]scsi_old_times_out+0/140>
Trace; c01214cb <run_timer_list+10b/170>
Trace; c011d0e2 <bh_action+22/40>
Trace; c011cff6 <tasklet_hi_action+46/70>
Trace; c011ce35 <do_softirq+95/a0>
Trace; c02089ee <netlink_set_err+6e/70>
Trace; c0105350 <default_idle+0/40>
Trace; c0105000 <_stext+0/0>
Trace; c010b058 <call_do_IRQ+5/d>
Trace; c0105350 <default_idle+0/40>
Trace; c0105350 <default_idle+0/40>
Trace; c0105000 <_stext+0/0>
Trace; c0105373 <default_idle+23/40>
Trace; c01053d4 <cpu_idle+24/30>
Code; c01c8d94 <do_reset1+24/210>
00000000 <_EIP>:
Code; c01c8d94 <do_reset1+24/210> <=====
0: 0f 0b ud2a <=====
Code; c01c8d96 <do_reset1+26/210>
2: ee out %al,(%dx)
Code; c01c8d97 <do_reset1+27/210>
3: 04 9e add $0x9e,%al
Code; c01c8d99 <do_reset1+29/210>
5: 64 26 c0 80 bf fd 00 rolb $0x0,%es:%fs:0xfdbf(%eax)
Code; c01c8da0 <do_reset1+30/210>
c: 00 00
Code; c01c8da2 <do_reset1+32/210>
e: 20 74 0c 8b and %dh,0xffffff8b(%esp,%ecx,1)
Code; c01c8da6 <do_reset1+36/210>
12: 74 24 je 38 <_EIP+0x38>
<0>Kernel panic: Aiee, killing interrupt handler!
here is dmesg output on this machine:
Linux version 2.4.21+rc5+ac2+benh-041103 (smcdermott@xxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #2 Fri May 30 01:54:19 EDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
BIOS-e820: 000000001ff60000 - 000000001ff7a000 (ACPI data)
BIOS-e820: 000000001ff7a000 - 000000001ff7c000 (ACPI NVS)
BIOS-e820: 000000001ff7c000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 130912
zone(0): 4096 pages.
zone(1): 126816 pages.
zone(2): 0 pages.
ACPI: RSDP (v002 IBM ) @ 0x000f7000
ACPI: XSDT (v001 IBM TP-1I 00000.08226) @ 0x1ff6f3a4
ACPI: FADT (v001 IBM TP-1I 00000.08226) @ 0x1ff6f3f0
ACPI: SSDT (v001 IBM TP-1I 00000.08226) @ 0x1ff6f4a4
ACPI: ECDT (v001 IBM TP-1I 00000.08226) @ 0x1ff79f55
ACPI: TCPA (v001 IBM TP-1I 00000.08226) @ 0x1ff79fa6
ACPI: BOOT (v001 IBM TP-1I 00000.08226) @ 0x1ff79fd8
ACPI: DSDT (v001 IBM TP-1I 00000.08226) @ 0x00000000
ACPI: BIOS passes blacklist
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: ro root=/dev/hda2 video=radeon:1280x1024-32@85,font:SUN12x22 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1794.233 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3578.26 BogoMIPS
Memory: 515484k/523648k available (1281k kernel code, 7776k reserved, 498k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000
CPU: Common caps: bfebf9ff 00000000 00000000 00000000
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030509
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1
ACPI: Found ECDT
ACPI: Could not use ECDT
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Discovered primary peer bus 09 [IRQ]
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
PCI: Found IRQ 11 for device 01:00.0
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 02:00.0
radeonfb: ref_clk=2700, ref_div=12, xclk=18300 from BIOS
radeonfb: panel ID string: SXGA+ Single (85MHz)
radeonfb: detected LCD panel size from BIOS: 1400x1050
Console: switching to colour frame buffer device 106x46
radeonfb: ATI Radeon M7 LW DDR SGRAM 16 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 5 for device 00:1f.6
PCI: Sharing IRQ 5 with 00:1f.3
PCI: Sharing IRQ 5 with 00:1f.5
PCI: Sharing IRQ 5 with 02:00.1
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N040ATCS05-0, ATA DISK drive
blk: queue c02fddc0, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/7898KiB Cache, CHS=5168/240/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 96k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
LVM version 1.0.5+(22/07/2002) module loaded
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,0), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: RW/DVD GCC-4240N Rev: 0211
Type: CD-ROM ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <tigran@xxxxxxxxxxx>
microcode: CPU0 no microcode found! (sig=f27, pflags=8)
Intel(R) PRO/100 Network Driver - version 2.2.21-k1
Copyright (c) 2003 Intel Corporation
PCI: Found IRQ 11 for device 02:08.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
and kernel config:
CONFIG_X86=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_KMOD=y
CONFIG_MPENTIUM4=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_F00F_WORKS_OK=y
CONFIG_X86_MCE=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_MICROCODE=m
CONFIG_X86_CPUID=m
CONFIG_EDD=m
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_X86_TSC=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IKCONFIG=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_1284=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_STATS=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID1=y
CONFIG_BLK_DEV_LVM=m
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_SCHED=y
CONFIG_NET_QOS=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_POLICE=y
CONFIG_NET_PKTGEN=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=m
CONFIG_BLK_DEV_SR=m
CONFIG_SR_EXTRA_DEVS=6
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_PCMCIA=y
CONFIG_I2O=m
CONFIG_I2O_PROC=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_WATCHDOG=y
CONFIG_I810_TCO=m
CONFIG_SOFT_WATCHDOG=m
CONFIG_INTEL_RNG=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_DRM=y
CONFIG_DRM_NEW=y
CONFIG_DRM_RADEON=m
CONFIG_PCMCIA_SERIAL_CS=m
CONFIG_MWAVE=m
CONFIG_QUOTA=y
CONFIG_QFMT_V2=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_PROC_INFO=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_ZISOFS_FS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_RADEON=y
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_SOUND=y
CONFIG_SOUND_ICH=m
CONFIG_USB=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_ACM=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
let me know if I can provide anything else that might be useful.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/