Re: 21rc6 serverworks IDE blows even more than is usual :)

[kwijibo (kwijibo@zianet.com)]

Well if it helps at all I can vouch for the brokeness on the
Proliant ML530.  Granted this is not with a 2.4.21-rc kernel
but a RedHat kernel 2.4.20-13.9smp.  Luckily I don't use IDE
drives in this system but it did force me to do a network install
since the CDROM is now unusable.  Here is the error out of dmesg:

SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
   ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
SvrWks CSB5: simplex device: DMA forced
   ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA
hda: HL-DT-ST CD-ROM GCR-8480B, ATAPI CD/DVD-ROM drive
hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hda: set_drive_speed_status: error=0x04

If any futher info is needed give me a yell.

Steve

Alan Cox wrote:

> On Iau, 2003-05-29 at 12:40, Tomas Szepe wrote:
>  
>
> > o  2.4.21-rc6
> > 	intrerrupt timeouts, can't r/w from/to drive reliably in pio, dma hosed
> >
> > o  2.4.21-rc2-ac3
> > 	r/w in pio ok, dma hosed
> >
> > o  2.4.20
> > 	intrerrupt timeouts, can't r/w from/to drive reliably in pio, dma hosed
> >    
>
> The driver basically hasnt changed throughout these. Are you sure you
> don't just have a bust Proliant - anyone else runnign 2.4.21-rc on a
> proliant ?
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
>
>  


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/