Hi
2.5.68-mm4 fixes APM suspend on my Vaio (problem reported with 2.5.68-mm2) but
my PCMCIA ethernet is still broken after suspend and requires ifconfig eth0
down; cardctl eject; cardctl insert before it will come to life (it took two
goes at that the first time, only one the second)
As before, I get thousands of "eth0: command 0x5800 did not complete!" after
resume, and I got the following backtrace after resume (possibly triggered by
the cardctl commands).
As before, Sony Vaio, pre-empt, APM, combined ethernet/modem PCMCIA using
3c574_cs.
Any more info required?
Charlie
irq 11: nobody cared!
Call Trace:
[<c010b640>] handle_IRQ_event+0x90/0x100
[<c010b897>] do_IRQ+0x97/0x120
[<c0109c68>] common_interrupt+0x18/0x20
[<c01ab1e3>] pci_bus_write_config_word+0x73/0x90
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c88a7890>] dead_socket+0x0/0xc [pcmcia_core]
[<c882984a>] yenta_set_socket+0xba/0x1b0 [yenta_socket]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c882a027>] yenta_clear_maps+0x57/0x90 [yenta_socket]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c88a7890>] dead_socket+0x0/0xc [pcmcia_core]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c882a20b>] yenta_init+0x1b/0x30 [yenta_socket]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c882aa70>] ricoh_init+0x10/0xe0 [yenta_socket]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c8829036>] +0x36/0x40 [yenta_socket]
[<c882c180>] +0x0/0x840 [yenta_socket]
[<c889dada>] init_socket+0x2a/0x30 [pcmcia_core]
[<c889df25>] shutdown_socket+0x15/0x100 [pcmcia_core]
[<c889e16a>] socket_shutdown+0x4a/0x60 [pcmcia_core]
[<c889e47a>] socket_insert+0x7a/0x80 [pcmcia_core]
[<c889da1a>] get_socket_status+0x1a/0x20 [pcmcia_core]
[<c889e6ad>] pccardd+0x13d/0x1f0 [pcmcia_core]
[<c0119df0>] default_wake_function+0x0/0x20
[<c01091d2>] ret_from_fork+0x6/0x14
[<c0119df0>] default_wake_function+0x0/0x20
[<c889e570>] pccardd+0x0/0x1f0 [pcmcia_core]
[<c010722d>] kernel_thread_helper+0x5/0x18
handlers:
[<c8862410>] (el3_interrupt+0x0/0x260 [3c574_cs])
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 07 2003 - 22:00:18 EST