Re: problem with a cobalt RaQ550 system and DMA (Serverworks OSB4 in impossible state)

From: Olivier Bornet (Olivier.Bornet@puck.ch)
Date: Thu Apr 24 2003 - 02:55:32 EST

Hi Duncan,

> The only work around we have found is to limit these drives to ATA
> mode 4. Supposedly newer Seagate firmware for these drives will report
> only UDMA mode 4 capable, but for earlier drives (like those probably
> found in your raq550) try this patch against 2.4.20.

Thanks ! This is the solution. I have applied the patch, and the sync
was now OK after about 1 hours for the 70 GB.

Is this patch already applyed on the 2.4.21-pre kernels ? If not can
someone apply it ?

One more time, thanks for your help.

                Olivier 

-- 
Olivier Bornet                 |      français : http://puck.ch/f
Swiss Ice Hockey Results       |      english  : http://puck.ch/e
http://puck.ch/                |      deutsch  : http://puck.ch/g
Olivier.Bornet@puck.ch         |      italiano : http://puck.ch/i
Get my PGP-key at http://puck.ch/pgp or at http://wwwkeys.pgp.net
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Wed Apr 30 2003 - 22:00:12 EST