Linux version 2.4.21-pre7-acpi (chris@emil.frop.org) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-113)) #2 Thu Apr 17 20:27:23 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: ro root=/dev/sda3 video=matrox:vesa:0x194,font:SUN12x22 aic7xxx=verbose console=ttyS1,9600 init=/bin/sh acpi=off Found and enabled local APIC! Initializing CPU#0 Detected 1000.063 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1992.29 BogoMIPS Memory: 256752k/262080k available (1244k kernel code, 4940k reserved, 353k data, 264k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Duron(tm) processor stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1000.0139 MHz. ..... host bus clock speed is 200.0027 MHz. cpu: 0, clocks: 2000027, slice: 1000013 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030328 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3099] at 00:00.0 KT266 enable bus disconnect on STPGNT: Now Active! Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 matroxfb: Matrox MGA-G200 (AGP) detected matroxfb: MTRR's turned on matroxfb: 1152x864x24bpp (virtual: 1152x2426) matroxfb: framebuffer at 0xE7000000, mapped to 0xd0805000, size 8388608 Console: switching to colour frame buffer device 96x39 fb0: MATROX VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio hda: Pioneer DVD-ROM ATAPIModel DVD-115 0127, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 SCSI subsystem driver Revision: 1.00 ahc_pci:0:14:0: Reading SEEPROM...done. ahc_pci:0:14:0: Low byte termination Enabled ahc_pci:0:14:0: Downloading Sequencer Program... 441 instructions downloaded ahc_pci:0:14:0: Features 0x0, Bugs 0x25, Flags 0x10401540 ahc_pci:0:15:0: Reading SEEPROM...done. ahc_pci:0:15:0: internal 50 cable not present, internal 68 cable is present ahc_pci:0:15:0: external cable not present ahc_pci:0:15:0: BIOS eeprom is present ahc_pci:0:15:0: High byte termination Enabled ahc_pci:0:15:0: Low byte termination Enabled ahc_pci:0:15:0: Downloading Sequencer Program... 451 instructions downloaded ahc_pci:0:15:0: Features 0x5, Bugs 0x25, Flags 0x10481400 (scsi0:A:0:0): Sending WDTR 0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs (scsi0:A:0:0): Received WDTR 0 filtered to 0 (scsi0:A:0): 3.300MB/s transfers scsi0: target 0 using 8bit transfers (scsi0:A:0): 3.300MB/s transfers scsi0: target 0 using asynchronous transfers scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs (scsi0:A:0:0): Sending WDTR 1 (scsi0:A:0:0): Received WDTR 1 filtered to 1 (scsi0:A:0): 6.600MB/s transfers (16bit) scsi0: target 0 using 16bit transfers (scsi0:A:0:0): Sending SDTR period c, offset 8 spurious 8259A interrupt: IRQ7. (scsi0:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) scsi0: target 0 synchronous at 20.0MHz, offset = 0x8 Vendor: IBM Model: DNES-318350W Rev: S80K Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Vendor: YAMAHA Model: CRW4416S Rev: 1.0f Type: CD-ROM ANSI SCSI revision: 02 (scsi1:A:6:0): Sending SDTR period 19, offset f (scsi1:A:6:0): Received SDTR period 1e, offset f Filtered to period 1e, offset f (scsi1:A:6): 8.333MB/s transfers (8.333MHz, offset 15) scsi1: target 6 synchronous at 8.0MHz, offset = 0xf (scsi1:A:6): 8.333MB/s transfers (8.333MHz, offset 15) Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:A:0:0): Sending WDTR 1 (scsi0:A:0:0): Received WDTR 1 filtered to 1 (scsi0:A:0): 6.600MB/s transfers (16bit) scsi0: target 0 using asynchronous transfers (scsi0:A:0:0): Sending SDTR period c, offset 8 (scsi0:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) scsi0: target 0 synchronous at 20.0MHz, offset = 0x8 SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p3 p4 < p5 p6 p7 p8 > mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 264k freed init-2.05a# /sbin/devfsd /dev Started device management daemon v1.3.25 for /dev init-2.05a# cat /dev/scsi/host1/bus0/target6/lun0/cd >/dev/null & [1] 14 init-2.05a# Attached scsi CD-ROM sr0 at scsi1, channel 0, id 6, lun 0 sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 init-2.05a# init-2.05a# init-2.05a# init-2.05a# init-2.05a# init-2.05a# ls -l /bin