> OK... Do you get the same locations failing with one pair of DIMMs as
> with another identical pair of DIMMs, or is it just randomly flakey?
never seems to be the same
(maybe a few are, but they've never all been the same--I'd have to look
closely to match any addresses)
> Are you sure it's not the power supply? If the voltages are only just
> within spec, you could concievably get the behavior you describe.
well, I have a 450 watt power supply that's rated for more than I'm
using--it very rarely even becomes warm after hours of use
the voltages go much higher than they need to; I've also tried adjusting
them and had the same problem
> I wouldn't even bothing trying to run anything on a machine until it
> runs Memtest86 for a couple of hours successfully.
I can with single modules, but not with 2..
I don't know what to do...
thanks for all of the comments/suggestions
----- Original Message -----
From: "John Bradford" <john@grabjohn.com>
To: "Brien" <admin@brien.com>
Cc: "John Bradford" <john@grabjohn.com>; <linux-kernel@vger.kernel.org>
Sent: Wednesday, April 16, 2003 3:28 PM
Subject: Re: my dual channel DDR 400 RAM won't work on any linux distro
> > I've now tried running the following configurations
>
> [snip]
>
> > and all of them have the same problem: black screen after kernel loads
> > they all do seem to test with errors when ran with another module, but
they
> > also DO NOT test as errors when they're alone
>
> OK... Do you get the same locations failing with one pair of DIMMs as
> with another identical pair of DIMMs, or is it just randomly flakey?
>
> > I'm starting to think it's a problem with my motherboard rather than
with
> > the RAM, because I've tried so many different ways and with different
RAM
> > modules.. but I don't know for sure..
>
> Are you sure it's not the power supply? If the voltages are only just
> within spec, you could concievably get the behavior you describe.
>
> > basically every time I try to run any linux distribution, even if I
> > type (mem=XXXM), it just doesn't work...
>
> I wouldn't even bothing trying to run anything on a machine until it
> runs Memtest86 for a couple of hours successfully.
>
> John.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:19 EST