On Thu, Apr 10, 2003 at 04:26:16PM +0200, Benjamin Herrenschmidt wrote:
> > I couldn't find a way to set the resolution at boot time (I use the
> > driver compiled in), I tried the following, all being ignored:
> > radeonfb:1024x768-8@60
> > radeon:1024x768-8@60
>
> Make sure you used "video=", that is you should have on your kernel
> command line video=radeon:1024x768-8@60
That made it work 8) thanks.
But there is something curious, with video=radeon:1024x768-8@60 I get:
renditai:~# fbset
mode "1024x768-60"
# D: 65.003 MHz, H: 48.365 kHz, V: 60.006 Hz
geometry 1024 768 1024 768 8
timings 15384 168 8 29 3 144 6
accel true
rgba 8/0,8/0,8/0,0/0
endmode
But with fbset "1024x768-60" I get:
renditai:~# fbset
mode "1024x768-60"
# D: 64.998 MHz, H: 48.362 kHz, V: 60.002 Hz
geometry 1024 768 1024 768 8
timings 15385 160 24 29 3 136 6
accel true
rgba 8/0,8/0,8/0,0/0
endmode
There's very little difference, but I was expecting to get the same
mode. I'll go read how that modedb stuff works...
Thanks again, bye.
-- ---------------------------------------- Daniele Venzano Web: http://digilander.iol.it/webvenza/- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Apr 15 2003 - 22:00:21 EST