--- a/drivers/net/wireless/Kconfig 2003-03-17 13:43:49.000000000 -0800 +++ b/drivers/net/wireless/Kconfig 2003-04-03 15:19:52.000000000 -0800 @@ -134,7 +134,7 @@ depends on NET_RADIO && PCMCIA config PCMCIA_RAYCS - tristate "Aviator/Raytheon 2.4MHz wireless support" + tristate "Aviator/Raytheon 2.4GHz wireless support" depends on NET_RADIO && PCMCIA ---help--- Say Y here if you intend to attach an Aviator/Raytheon PCMCIA @@ -189,6 +189,8 @@ configure your card and that /etc/pcmcia/wireless.opts works : + If you compile this as a module, it will be called "hermes". + config APPLE_AIRPORT tristate "Apple Airport support (built-in)" depends on ALL_PPC && HERMES @@ -196,7 +198,9 @@ Say Y here to support the Airport 802.11b wireless Ethernet hardware built into the Macintosh iBook and other recent PowerPC-based Macintosh machines. This is essentially a Lucent Orinoco card with - a non-standard interface + a non-standard interface. + + If you compile this as a module, it will be called "airport". config PLX_HERMES tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)" @@ -212,6 +216,8 @@ Support for these adaptors is so far still incomplete and buggy. You have been warned. + If you compile this as a module, it will be called "orinoco_plx". + config PCI_HERMES tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)" depends on PCI && HERMES && EXPERIMENTAL @@ -222,6 +228,8 @@ common. Some of the built-in wireless adaptors in laptops are of this variety. + If you compile this as a module, it will be called "orinoco_pci." + # If Pcmcia is compiled in, offer Pcmcia cards... comment "Wireless 802.11b Pcmcia/Cardbus cards support" depends on NET_RADIO && PCMCIA @@ -246,6 +254,8 @@ configure your card and that /etc/pcmcia/wireless.opts works: . + If you compile this as a module, it will be called "orinoco_cs". + config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" depends on NET_RADIO && PCMCIA @@ -259,7 +269,7 @@ supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom 802.11b cards. - This driver support both the standard Linux Wireless Extensions + This driver supports both the standard Linux Wireless Extensions and Cisco proprietary API, so both the Linux Wireless Tools and the Cisco Linux utilities can be used to configure the card. @@ -268,6 +278,8 @@ for location). You also want to check out the PCMCIA-HOWTO, available from . + If you compile this as a module, it will be called "airo_cs". + # yes, this works even when no drivers are selected config NET_WIRELESS bool --- a/drivers/serial/Kconfig 2003-04-01 21:58:50.000000000 -0800 +++ b/drivers/serial/Kconfig 2003-04-03 15:23:04.000000000 -0800 @@ -73,7 +73,7 @@ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module will be called serial_cs. If you want to compile it as + The module will be called 8250_cs. If you want to compile it as a module, say M here and read . If unsure, say N. --- a/drivers/char/watchdog/Kconfig 2003-03-17 13:44:19.000000000 -0800 +++ /tmp/diffwOjj2c 2003-04-03 15:37:03.000000000 -0800 @@ -364,8 +364,7 @@ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). If you want to compile it as a module, say M here and read - Documentation/modules.txt. The module will be called - wafer5823wdt.o + Documentation/modules.txt. The module will be called "wafer5823wdt". config CPU5_WDT tristate "SMA CPU5 Watchdog" @@ -374,7 +373,7 @@ TBD. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module is called cpu5wdt.o. If you want to compile it as a + The module is called "cpu5wdt". If you want to compile it as a module, say M here and read . endmenu --- a/drivers/s390/net/Kconfig 2003-03-17 13:44:43.000000000 -0800 +++ /tmp/diffpyWjrd 2003-04-03 15:37:55.000000000 -0800 @@ -9,7 +9,7 @@ or zSeries. This device driver supports Token Ring (IEEE 802.5), FDDI (IEEE 802.7) and Ethernet. This option is also available as a module which will be - called lcs.o . If you do not know what it is, it's safe to say "Y". + called "lcs". If you do not know what it is, it's safe to say "Y". config CTC tristate "CTC device support" @@ -20,7 +20,7 @@ coupling using ESCON. It also supports virtual CTCs when running under VM. It will use the channel device configuration if this is available. This option is also available as a module which will be - called ctc.o. If you do not know what it is, it's safe to say "Y". + called "ctc". If you do not know what it is, it's safe to say "Y". config IUCV tristate "IUCV device support (VM only)" @@ -28,7 +28,7 @@ help Select this option if you want to use inter-user communication vehicle networking under VM or VIF. This option is also available - as a module which will be called iucv.o. If unsure, say "Y". + as a module which will be called "iucv". If unsure, say "Y". config CCWGROUP tristate --- a/drivers/net/Kconfig 2003-04-01 21:58:49.000000000 -0800 +++ /tmp/diffXVXENg 2003-04-03 15:38:21.000000000 -0800 @@ -762,7 +762,7 @@ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module will be called typhoon.o. If you want to compile it as a + The module will be called "typhoon". If you want to compile it as a module, say M here and read as well as . --- a/drivers/input/keyboard/Kconfig 2003-04-01 21:57:10.000000000 -0800 +++ /tmp/diffYpoxzU 2003-04-03 15:38:42.000000000 -0800 @@ -99,6 +99,6 @@ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module will be called xtkbd.o. If you want to compile it as a + The module will be called xtkbd. If you want to compile it as a module, say M here and read . --- a/drivers/input/serio/Kconfig 2003-04-01 21:57:10.000000000 -0800 +++ /tmp/difffKNbAi 2003-04-03 15:39:39.000000000 -0800 @@ -116,6 +116,6 @@ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module will be called rpckbd.o. If you want to compile it as a + The module will be called rpckbd. If you want to compile it as a module, say M here and read . --- a/drivers/input/mouse/Kconfig 2003-04-01 21:57:10.000000000 -0800 +++ /tmp/diff4fp5UN 2003-04-03 15:39:52.000000000 -0800 @@ -130,6 +130,6 @@ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module will be called logibm.o. If you want to compile it as a + The module will be called logibm. If you want to compile it as a module, say M here and read . --- a/drivers/bluetooth/Kconfig 2003-03-17 13:44:04.000000000 -0800 +++ /tmp/diffTHnAud 2003-04-03 15:40:23.000000000 -0800 @@ -105,7 +105,7 @@ Anycom Bluetooth CF Card Say Y here to compile support for HCI BlueCard devices into the - kernel or say M to compile it as module (bluecard_cs.o). + kernel or say M to compile it as module (bluecard_cs). config BT_HCIBTUART tristate "HCI UART (PC Card) device driver"