I'll have to check for the polarity and trigger but I have essentially the
same problem. I've just been running without acpi on my laptop for months
since it won't work with it. In my case, though, I do have the sound card
on the same interrupt
{25}: cat /proc/interrupts
CPU0
0: 11772951 XT-PIC timer
1: 28 XT-PIC i8042
2: 0 XT-PIC cascade
8: 4 XT-PIC rtc
9: 51 XT-PIC VIA8233
10: 263 XT-PIC uhci-hcd, uhci-hcd, eth0
11: 506669 XT-PIC ENE Technology Inc CB1410 Cardbus Contr, eth1
12: 35 XT-PIC i8042
14: 89289 XT-PIC ide0
15: 1 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
And my laptop freezes solid when I try to even run with acpi on. I think
I even fixed my acpi dsdt table but I haven't been able to check due to this
other problem
> polarity 1 = active high
> trigger 3 = level
>
> Can you look at /proc/interrupts and tell me if irq 9 is shared with
> anyone else, especially PCI devices?
-- Matthew Harrell Microwaves frizz your heir... Bit Twiddlers, Inc. mharrell@bittwiddlers.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 07 2003 - 22:00:13 EST