Original 2.5.65. Put some printks in.
Two tries with service network start. Success on the second try.
Here are the messages
First try
Mar 24 08:01:16 mhfl1 network: Setting network parameters: succeeded
Mar 24 08:01:17 mhfl1 ifup: Cannot find device "eth0"
Mar 24 08:01:18 mhfl1 network: Bringing up loopback interface: succeeded
Mar 24 08:01:19 mhfl1 kernel: ne: ne_probe
Mar 24 08:01:19 mhfl1 kernel: ne: ne_probe_isapnp
It seems that pnp does not work the first try:
Mar 24 08:01:19 mhfl1 kernel: pnp: res: The PnP device '01:01.00' is already active.
Mar 24 08:01:19 mhfl1 kernel: ne.c: You must supply "io=0xNNN" value(s) for ISA cards.
Mar 24 08:01:19 mhfl1 ifup: ne device eth0 does not seem to be present, delaying initialization.
Mar 24 08:01:19 mhfl1 network: Bringing up interface eth0: failed
Second try
Mar 24 08:01:20 mhfl1 network: Setting network parameters: succeeded
Mar 24 08:01:21 mhfl1 ifup: Cannot find device "eth0"
Mar 24 08:01:22 mhfl1 network: Bringing up loopback interface: succeeded
Mar 24 08:01:23 mhfl1 kernel: ne: ne_probe
Mar 24 08:01:23 mhfl1 kernel: ne: ne_probe_isapnp
Mar 24 08:01:23 mhfl1 kernel: ne.c: ISAPnP reports Generic PNP at i/o 0x2a0, irq 15.
Mar 24 08:01:23 mhfl1 kernel: ne: ne_probe1
Mar 24 08:01:23 mhfl1 kernel: ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Mar 24 08:01:23 mhfl1 kernel: Last modified Nov 1, 2000 by Paul Gortmaker
Mar 24 08:01:23 mhfl1 kernel: NE*000 ethercard probe at 0x2a0: 00 00 ff ff 27 ef
Mar 24 08:01:23 mhfl1 kernel: eth0: NE2000 found at 0x2a0, using IRQ 15.
Mar 24 08:01:23 mhfl1 kernel: ne: ne_probe_isapnp == 0
Mar 24 08:01:23 mhfl1 kernel: ne: ne_probe
Mar 24 08:01:23 mhfl1 kernel: ne: ne_probe_isapnp
Mar 24 08:01:26 mhfl1 network: Bringing up interface eth0: succeeded
---------
ne_probe1 and ne_probe_isapnp have only a printk at their top
---------
int __init ne_probe(struct net_device *dev)
{
unsigned int base_addr = dev->base_addr;
printk("ne: ne_probe\n");
SET_MODULE_OWNER(dev);
/* First check any supplied i/o locations. User knows best. <cough> */
if (base_addr > 0x1ff) /* Check a single specified location. */
return ne_probe1(dev, base_addr);
else if (base_addr != 0) /* Don't probe at all. */
return -ENXIO;
/* Then look for any installed ISAPnP clones */
if (isapnp_present() == 0)
printk("ne: no isapnp found\n");
else if (ne_probe_isapnp(dev) == 0) {
printk("ne: ne_probe_isapnp == 0\n");
return 0;
}
#ifndef MODULE
/* Last resort. The semi-risky ISA auto-probe. */
for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) {
int ioaddr = netcard_portlist[base_addr];
if (ne_probe1(dev, ioaddr) == 0)
return 0;
}
#endif
return -ENODEV;
}
--------
On Monday 24 March 2003 04:40, Alan Cox wrote:
> On Sun, 2003-03-23 at 19:26, M.H.VanLeeuwen wrote:
> > Here is the ordering of initcall from System.map file w/ my
> > change. I take it that you want isapnp_init after pci*_init
> > also, or is it sufficient like it is, after the acpi*_init?
>
> pci and pnpbios must come before isapnp as well. Otherwise IGP
> based systems will MCE on boot
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 23 2003 - 22:00:46 EST