On Wed, 2003-02-26 at 17:02, Richard B. Johnson wrote:
> This has turned out to be a FAQ. DMA is not "better"
> than some other transfer mode. It's just a method.
In the IDE world that isnt quite so. The IDE world has other
limits depending on PIO versus DMA setup which make your
explanation, while correct for the general case incorrect for
the IDE world.
DMA is a lot better than other transfer modes on IDE devices, not
only because PIO burns CPU but because of the cable timings.
IDE normally goes up to PIO4, PIO4 is equivalent to MWDMA2. IDE
DMA then goes up to UDMA133/150 with SATA. So PIO limits you to
a fair bit under 10Mbytes/second, while UDMA133 generally comes
down to your PCI bus capability.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Feb 28 2003 - 22:00:38 EST