Removed changes to comments in .S files -- gcc does not like apostrophes
in assembler comments.
This fixes:
wont -> won't (21 occurrences)
diff -ur a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
--- a/arch/ia64/sn/kernel/setup.c Mon Feb 24 11:05:14 2003
+++ b/arch/ia64/sn/kernel/setup.c Tue Feb 25 10:08:11 2003
@@ -172,7 +172,7 @@
/*
* Parse enough of the SAL tables to locate the SAL entry point. Since, console
- * IO on SN2 is done via SAL calls, early_printk wont work without this.
+ * IO on SN2 is done via SAL calls, early_printk won't work without this.
*
* This code duplicates some of the ACPI table parsing that is in efi.c & sal.c.
* Any changes to those file may have to be made hereas well.
diff -ur a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
--- a/arch/parisc/kernel/ptrace.c Mon Feb 24 11:05:09 2003
+++ b/arch/parisc/kernel/ptrace.c Tue Feb 25 10:08:13 2003
@@ -242,7 +242,7 @@
*
* Allow writing to Nullify, Divide-step-correction,
* and carry/borrow bits.
- * BEWARE, if you set N, and then single step, it wont
+ * BEWARE, if you set N, and then single step, it won't
* stop on the nullified instruction.
*/
DBG(("sys_ptrace(POKEUSR, %d, %lx, %lx)\n",
diff -ur a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
--- a/drivers/char/n_hdlc.c Mon Feb 24 11:05:14 2003
+++ b/drivers/char/n_hdlc.c Tue Feb 25 10:08:20 2003
@@ -833,7 +833,7 @@
poll_wait(filp, &tty->read_wait, wait);
poll_wait(filp, &tty->write_wait, wait);
- /* set bits for operations that wont block */
+ /* set bits for operations that won't block */
if(n_hdlc->rx_buf_list.head)
mask |= POLLIN | POLLRDNORM; /* readable */
if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
diff -ur a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
--- a/drivers/char/rio/rio_linux.c Mon Feb 24 11:05:34 2003
+++ b/drivers/char/rio/rio_linux.c Tue Feb 25 10:08:22 2003
@@ -464,7 +464,7 @@
recursive calls will hang the machine in the interrupt routine.
- hardware twiddling goes before "recursive". Otherwise when we
- poll the card, and a recursive interrupt happens, we wont
+ poll the card, and a recursive interrupt happens, we won't
ack the card, so it might keep on interrupting us. (especially
level sensitive interrupt systems like PCI).
diff -ur a/drivers/char/sx.c b/drivers/char/sx.c
--- a/drivers/char/sx.c Mon Feb 24 11:05:16 2003
+++ b/drivers/char/sx.c Tue Feb 25 10:08:24 2003
@@ -1216,7 +1216,7 @@
recursive calls will hang the machine in the interrupt routine.
- hardware twiddling goes before "recursive". Otherwise when we
- poll the card, and a recursive interrupt happens, we wont
+ poll the card, and a recursive interrupt happens, we won't
ack the card, so it might keep on interrupting us. (especially
level sensitive interrupt systems like PCI).
diff -ur a/drivers/char/vt.c b/drivers/char/vt.c
--- a/drivers/char/vt.c Mon Feb 24 11:05:41 2003
+++ b/drivers/char/vt.c Tue Feb 25 10:08:28 2003
@@ -2872,7 +2872,7 @@
* this is done in order to maintain compatibility with the EGA/VGA fonts. It
* is upto the actual low-level console-driver convert data into its favorite
* format (maybe we should add a `fontoffset' field to the `display'
- * structure so we wont have to convert the fontdata all the time.
+ * structure so we won't have to convert the fontdata all the time.
* /Jes
*/
diff -ur a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
--- a/drivers/ieee1394/eth1394.c Mon Feb 24 11:05:35 2003
+++ b/drivers/ieee1394/eth1394.c Tue Feb 25 10:08:31 2003
@@ -663,7 +663,7 @@
* call to schedule our writes. */
/* XXX: Right now we accept that we don't exactly follow RFC. When
- * we do, we will send ARP requests via GASP format, and so we wont
+ * we do, we will send ARP requests via GASP format, and so we won't
* need this hack. */
spin_lock_irqsave (&priv->lock, flags);
diff -ur a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
--- a/drivers/ieee1394/ohci1394.c Mon Feb 24 11:05:41 2003
+++ b/drivers/ieee1394/ohci1394.c Tue Feb 25 10:08:33 2003
@@ -2266,7 +2266,7 @@
if (event & OHCI1394_cycleInconsistent) {
/* We subscribe to the cycleInconsistent event only to
* clear the corresponding event bit... otherwise,
- * isochronous cycleMatch DMA wont work. */
+ * isochronous cycleMatch DMA won't work. */
DBGMSG(ohci->id, "OHCI1394_cycleInconsistent");
event &= ~OHCI1394_cycleInconsistent;
}
diff -ur a/drivers/md/md.c b/drivers/md/md.c
--- a/drivers/md/md.c Mon Feb 24 11:05:14 2003
+++ b/drivers/md/md.c Tue Feb 25 10:08:35 2003
@@ -1731,7 +1731,7 @@
mddev_unlock(mddev);
}
/* on success, candidates will be empty, on error
- * it wont...
+ * it won't...
*/
ITERATE_RDEV_GENERIC(candidates,rdev,tmp)
export_rdev(rdev);
diff -ur a/drivers/media/video/zr36120_i2c.c b/drivers/media/video/zr36120_i2c.c
--- a/drivers/media/video/zr36120_i2c.c Mon Feb 24 11:06:03 2003
+++ b/drivers/media/video/zr36120_i2c.c Tue Feb 25 10:08:39 2003
@@ -86,7 +86,7 @@
if (ztv->tuner_type >= 0)
{
if (i2c_control_device(&ztv->i2c,I2C_DRIVERID_TUNER,TUNER_SET_TYPE,&ztv->tuner_type)<0)
- DEBUG(printk(CARD_INFO "attach_inform; tuner wont be set to type %d\n",CARD,ztv->tuner_type));
+ DEBUG(printk(CARD_INFO "attach_inform; tuner won't be set to type %d\n",CARD,ztv->tuner_type));
}
break;
default:
diff -ur a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
--- a/drivers/net/cs89x0.c Mon Feb 24 11:05:40 2003
+++ b/drivers/net/cs89x0.c Tue Feb 25 10:08:40 2003
@@ -1112,7 +1112,7 @@
int i;
int ret;
-#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this wont work */
+#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this won't work */
if (dev->irq < 2) {
/* Allow interrupts to be generated by the chip */
/* Cirrus' release had this: */
diff -ur a/drivers/net/eth16i.c b/drivers/net/eth16i.c
--- a/drivers/net/eth16i.c Mon Feb 24 11:05:41 2003
+++ b/drivers/net/eth16i.c Tue Feb 25 10:08:43 2003
@@ -1231,7 +1231,7 @@
/* Turn off all interrupts from adapter */
outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
- /* eth16i_tx wont be called */
+ /* eth16i_tx won't be called */
spin_lock(&lp->lock);
status = inw(ioaddr + TX_STATUS_REG); /* Get the status */
diff -ur a/drivers/net/hp100.c b/drivers/net/hp100.c
--- a/drivers/net/hp100.c Mon Feb 24 11:05:16 2003
+++ b/drivers/net/hp100.c Tue Feb 25 10:08:45 2003
@@ -2811,7 +2811,7 @@
printk("hp100: %s: Problem logging into the HUB.\n", dev->name);
if (lp->chip == HP100_CHIPID_LASSEN) {
/* Check allowed Register to find out why there is a problem. */
- val = hp100_inw(TRAIN_ALLOW); /* wont work on non-ETR card */
+ val = hp100_inw(TRAIN_ALLOW); /* won't work on non-ETR card */
#ifdef HP100_DEBUG_TRAINING
printk("hp100: %s: MAC Configuration requested: 0x%04x, HUB allowed: 0x%04x\n", dev->name, hp100_inw(TRAIN_REQUEST), val);
#endif
diff -ur a/drivers/net/wireless/arlan.c b/drivers/net/wireless/arlan.c
--- a/drivers/net/wireless/arlan.c Mon Feb 24 11:05:35 2003
+++ b/drivers/net/wireless/arlan.c Tue Feb 25 10:08:46 2003
@@ -567,7 +567,7 @@
break;
times++;
}
- /* if long command, we wont repeat trying */ ;
+ /* if long command, we won't repeat trying */ ;
if (priv->card_polling_interval > 1)
break;
times++;
diff -ur a/fs/buffer.c b/fs/buffer.c
--- a/fs/buffer.c Mon Feb 24 11:05:34 2003
+++ b/fs/buffer.c Tue Feb 25 10:08:48 2003
@@ -2584,7 +2584,7 @@
* BH_Lock state bit), any buffer that appears to be clean when doing a
* write request, and any buffer that appears to be up-to-date when doing
* read request. Further it marks as clean buffers that are processed for
- * writing (the buffer cache wont assume that they are actually clean until
+ * writing (the buffer cache won't assume that they are actually clean until
* the buffer gets unlocked).
*
* ll_rw_block sets b_end_io to simple completion handler that marks
diff -ur a/fs/nfsd/export.c b/fs/nfsd/export.c
--- a/fs/nfsd/export.c Mon Feb 24 11:05:34 2003
+++ b/fs/nfsd/export.c Tue Feb 25 10:08:50 2003
@@ -626,7 +626,7 @@
exp = exp_get_by_name(clp, nd.mnt, nd.dentry, NULL);
- /* must make sure there wont be an ex_fsid clash */
+ /* must make sure there won't be an ex_fsid clash */
if ((nxp->ex_flags & NFSEXP_FSID) &&
(fsid_key = exp_get_fsid_key(clp, nxp->ex_dev)) &&
!IS_ERR(fsid_key) &&
diff -ur a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h
--- a/include/asm-ia64/mmzone.h Mon Feb 24 11:06:03 2003
+++ b/include/asm-ia64/mmzone.h Tue Feb 25 10:08:52 2003
@@ -44,7 +44,7 @@
* Note that IO addresses are NOT considered valid addresses.
*
* Note, many platforms can simply check if kaddr exceeds a specific size.
- * (However, this wont work on SGI platforms since IO space is embedded
+ * (However, this won't work on SGI platforms since IO space is embedded
* within the range of valid memory addresses & nodes have holes in the
* address range between banks).
*/
diff -ur a/include/asm-m68k/io.h b/include/asm-m68k/io.h
--- a/include/asm-m68k/io.h Mon Feb 24 11:05:35 2003
+++ b/include/asm-m68k/io.h Tue Feb 25 10:08:54 2003
@@ -250,7 +250,7 @@
#define readl(addr) in_le32(addr)
#define writel(val,addr) out_le32((addr),(val))
-/* those can be defined for both ISA and PCI - it wont work though */
+/* those can be defined for both ISA and PCI - it won't work though */
#define readb(addr) in_8(addr)
#define readw(addr) in_le16(addr)
#define writeb(val,addr) out_8((addr),(val))
diff -ur a/include/linux/jiffies.h b/include/linux/jiffies.h
--- a/include/linux/jiffies.h Mon Feb 24 11:05:05 2003
+++ b/include/linux/jiffies.h Tue Feb 25 10:08:56 2003
@@ -28,7 +28,7 @@
* These inlines deal with timer wrapping correctly. You are
* strongly encouraged to use them
* 1. Because people otherwise forget
- * 2. Because if the timer wrap changes in future you wont have to
+ * 2. Because if the timer wrap changes in future you won't have to
* alter your driver code.
*
* time_after(a,b) returns true if the time a is after time b.
diff -ur a/sound/oss/ad1816.c b/sound/oss/ad1816.c
--- a/sound/oss/ad1816.c Mon Feb 24 11:05:43 2003
+++ b/sound/oss/ad1816.c Tue Feb 25 10:08:59 2003
@@ -1227,7 +1227,7 @@
sound_free_dma(devc->dma_capture);
}
- /* card wont get added if resources could not be allocated
+ /* card won't get added if resources could not be allocated
thus we need not ckeck if allocation was successful */
sound_free_dma (devc->dma_playback);
free_irq(devc->irq, devc->osp);
diff -ur a/sound/oss/opl3sa2.c b/sound/oss/opl3sa2.c
--- a/sound/oss/opl3sa2.c Mon Feb 24 11:05:04 2003
+++ b/sound/oss/opl3sa2.c Tue Feb 25 10:09:05 2003
@@ -918,7 +918,7 @@
break;
}
- /* its supposed to automute before suspending, so we wont bother */
+ /* its supposed to automute before suspending, so we won't bother */
opl3sa2_read(p->cfg_port, OPL3SA2_PM, &p->reg);
opl3sa2_write(p->cfg_port, OPL3SA2_PM, p->reg | pm_mode);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Feb 28 2003 - 22:00:32 EST