ksymoops 2.4.4 on i686 2.5.61-ac1.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.5.61-ac1/ (default)
     -m /boot/System.map-2.5.61-ac1 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
CPU 1 IS NOW UP!
 sda:<1>Unable to handle kernel NULL pointer dereference at virtual address 00000000
00000000
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0060:[<00000000>]    Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: cfbcdea0   ebx: cfffeaa8   ecx: 00000000   edx: cfffeaa8
esi: 00000003   edi: 00000000   ebp: cf557da0   esp: cf557d98
ds: 007b   es: 007b   ss: 0068
Stack: c01f86fd cfffeaa8 cf557dcc c01f4024 cfffeaa8 00000000 c0290c8c cf4da0dc 
       00000000 c015a2a0 
 [<c01f86fd>] current_capacity+0x1d/0x30
 [<c01f4024>] ide_xlate_1024+0x124/0x170
 [<c015a2a0>] blkdev_readpage+0x0/0x20
 [<c0185c24>] handle_ide_mess+0x164/0x200
 [<c0185cfb>] msdos_partition+0x3b/0x360
 [<c011fa93>] release_console_sem+0xa3/0x140
 [<c011f948>] printk+0x1d8/0x230
 [<c018501a>] check_partition+0xaa/0x100
 [<c015a6b7>] bdget+0x187/0x240
 [<c0185361>] register_disk+0xc1/0x140
 [<c01e19ed>] blk_register_region+0x4d/0xc0
 [<c01e1b47>] add_disk+0x37/0x50
 [<c01e1ae0>] exact_match+0x0/0x10
 [<c01e1af0>] exact_lock+0x0/0x20
 [<c0210479>] sd_attach+0x2d9/0x350
 [<c02078cc>] scsi_attach_device+0x6c/0xc0
 [<c0208316>] scsi_add_host+0x66/0x80
 [<d083ba2b>] idescsi_attach+0xab/0xcf [ide_scsi]
 [<d083d020>] idescsi_primary+0x0/0xe0 [ide_scsi]
 [<d083cea0>] idescsi_driver+0x0/0xd0 [ide_scsi]
 [<d083cf68>] idescsi_driver+0xc8/0xd0 [ide_scsi]
 [<c01fa3be>] ata_attach+0xde/0x270
 [<d083cea0>] idescsi_driver+0x0/0xd0 [ide_scsi]
 [<d083cea0>] idescsi_driver+0x0/0xd0 [ide_scsi]
 [<c01fb4fb>] ide_register_driver+0x16b/0x1a0
 [<d083f030>] +0x30/0xffffe6c0 [ide_scsi]
 [<d083cea0>] idescsi_driver+0x0/0xd0 [ide_scsi]
 [<d083d1e0>] +0x0/0x4e0 [ide_scsi]
 [<c01354d0>] sys_init_module+0x1a0/0x240
 [<c01094cb>] syscall_call+0x7/0xb
Code:  Bad EIP value.

>>EIP; 00000000 Before first symbol

warning: process `update' used the obsolete bdflush system call
warning: process `update' used the obsolete bdflush system call

1 warning and 1 error issued.  Results may not be reliable.