This is additional patch to support NEC PC-9800 subarchitecture
against 2.5.62-ac1. (20/21)
Support difference of timer, using mach-* scheme.
Regards,
Osamu Tomita
diff -Nru linux-2.5.60/arch/i386/kernel/timers/timer_pit.c linux98-2.5.60/arch/i386/kernel/timers/timer_pit.c
--- linux-2.5.60/arch/i386/kernel/timers/timer_pit.c 2003-02-11 03:38:51.000000000 +0900
+++ linux98-2.5.60/arch/i386/kernel/timers/timer_pit.c 2003-02-11 11:15:22.000000000 +0900
@@ -16,6 +16,7 @@
extern spinlock_t i8259A_lock;
extern spinlock_t i8253_lock;
#include "do_timer.h"
+#include "io_ports.h"
static int init_pit(void)
{
@@ -77,7 +78,8 @@
{
int count;
unsigned long flags;
- static int count_p = LATCH; /* for the first call after boot */
+ static int count_p;
+ static int is_1st_boot = 1; /* for the first call after boot */
static unsigned long jiffies_p = 0;
/*
@@ -85,11 +87,17 @@
*/
unsigned long jiffies_t;
+ /* for support LATCH is not constant */
+ if (is_1st_boot) {
+ is_1st_boot = 0;
+ count_p = LATCH;
+ }
+
spin_lock_irqsave(&i8253_lock, flags);
/* timer count may underflow right here */
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(0x40); /* read the latched count */
+ count = inb_p(PIT_CH0); /* read the latched count */
/*
* We do this guaranteed double memory access instead of a _p
@@ -97,13 +105,13 @@
*/
jiffies_t = jiffies;
- count |= inb_p(0x40) << 8;
+ count |= inb_p(PIT_CH0) << 8;
/* VIA686a test code... reset the latch if count > max + 1 */
if (count > LATCH) {
- outb_p(0x34, 0x43);
- outb_p(LATCH & 0xff, 0x40);
- outb(LATCH >> 8, 0x40);
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
count = LATCH - 1;
}
diff -Nru linux-2.5.61/arch/i386/kernel/timers/timer_tsc.c linux98-2.5.61/arch/i386/kernel/timers/timer_tsc.c
--- linux-2.5.61/arch/i386/kernel/timers/timer_tsc.c 2003-02-15 08:52:04.000000000 +0900
+++ linux98-2.5.61/arch/i386/kernel/timers/timer_tsc.c 2003-02-15 14:13:41.000000000 +0900
@@ -14,6 +14,9 @@
/* processor.h for distable_tsc flag */
#include <asm/processor.h>
+#include "io_ports.h"
+#include "calibrate_tsc.h"
+
int tsc_disable __initdata = 0;
extern spinlock_t i8253_lock;
@@ -22,8 +25,6 @@
/* Number of usecs that the last interrupt was delayed */
static int delay_at_last_interrupt;
-static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
-
/* Cached *multiplier* to convert TSC counts to microseconds.
* (see the equation below).
* Equal to 2^32 * (1 / (clocks per usec) ).
@@ -64,7 +65,12 @@
{
int count;
int countmp;
- static int count1=0, count2=LATCH;
+ static int count1=0, count2, initialize = 1;
+
+ if (initialize) {
+ count2 = LATCH;
+ initialize = 0;
+ }
/*
* It is important that these two operations happen almost at
* the same time. We do the RDTSC stuff first, since it's
@@ -82,10 +88,10 @@
rdtscl(last_tsc_low);
spin_lock(&i8253_lock);
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(0x40); /* read the latched count */
- count |= inb(0x40) << 8;
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb(PIT_CH0) << 8;
spin_unlock(&i8253_lock);
if (pit_latch_buggy) {
@@ -118,83 +124,9 @@
} while ((now-bclock) < loops);
}
-/* ------ Calibrate the TSC -------
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-
-#define CALIBRATE_LATCH (5 * LATCH)
-#define CALIBRATE_TIME (5 * 1000020/HZ)
-
unsigned long __init calibrate_tsc(void)
{
- /* Set the Gate high, disable speaker */
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- /*
- * Now let's take care of CTC channel 2
- *
- * Set the Gate high, program CTC channel 2 for mode 0,
- * (interrupt on terminal count mode), binary count,
- * load 5 * LATCH count, (LSB and MSB) to begin countdown.
- *
- * Some devices need a delay here.
- */
- outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
- outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
- outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
-
- {
- unsigned long startlow, starthigh;
- unsigned long endlow, endhigh;
- unsigned long count;
-
- rdtsc(startlow,starthigh);
- count = 0;
- do {
- count++;
- } while ((inb(0x61) & 0x20) == 0);
- rdtsc(endlow,endhigh);
-
- last_tsc_low = endlow;
-
- /* Error: ECTCNEVERSET */
- if (count <= 1)
- goto bad_ctc;
-
- /* 64-bit subtract - gcc just messes up with long longs */
- __asm__("subl %2,%0\n\t"
- "sbbl %3,%1"
- :"=a" (endlow), "=d" (endhigh)
- :"g" (startlow), "g" (starthigh),
- "0" (endlow), "1" (endhigh));
-
- /* Error: ECPUTOOFAST */
- if (endhigh)
- goto bad_ctc;
-
- /* Error: ECPUTOOSLOW */
- if (endlow <= CALIBRATE_TIME)
- goto bad_ctc;
-
- __asm__("divl %2"
- :"=a" (endlow), "=d" (endhigh)
- :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
-
- return endlow;
- }
-
- /*
- * The CTC wasn't reliable: we got a hit on the very first read,
- * or the CPU was so fast/slow that the quotient wouldn't fit in
- * 32 bits..
- */
-bad_ctc:
- return 0;
+ return mach_calibrate_tsc();
}
diff -Nru linux/include/asm-i386/mach-default/calibrate_tsc.h linux98/include/asm-i386/mach-default/calibrate_tsc.h
--- linux/include/asm-i386/mach-default/calibrate_tsc.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-default/calibrate_tsc.h 2002-11-05 22:15:11.000000000 +0900
@@ -0,0 +1,90 @@
+/*
+ * include/asm-i386/mach-default/calibrate_tsc.h
+ *
+ * Machine specific calibrate_tsc() for generic.
+ * Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _MACH_CALIBRATE_TSC_H
+#define _MACH_CALIBRATE_TSC_H
+
+#define CALIBRATE_LATCH (5 * LATCH)
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+
+static inline unsigned long mach_calibrate_tsc(void)
+{
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Now let's take care of CTC channel 2
+ *
+ * Set the Gate high, program CTC channel 2 for mode 0,
+ * (interrupt on terminal count mode), binary count,
+ * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+ *
+ * Some devices need a delay here.
+ */
+ outb(0xb0, PIT_MODE); /* binary, mode 0, LSB/MSB, Ch 2 */
+ outb(CALIBRATE_LATCH & 0xff, PIT_CH2); /* LSB of count */
+ outb(CALIBRATE_LATCH >> 8, PIT_CH2); /* MSB of count */
+
+ {
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned long count;
+
+ rdtsc(startlow,starthigh);
+ count = 0;
+ do {
+ count++;
+ } while ((inb(0x61) & 0x20) == 0);
+ rdtsc(endlow,endhigh);
+
+ last_tsc_low = endlow;
+
+ /* Error: ECTCNEVERSET */
+ if (count <= 1)
+ goto bad_ctc;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+ }
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#endif /* !_MACH_CALIBRATE_TSC_H */
diff -Nru linux/include/asm-i386/mach-pc9800/do_timer.h linux98/include/asm-i386/mach-pc9800/do_timer.h
--- linux/include/asm-i386/mach-pc9800/do_timer.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/do_timer.h 2002-10-16 13:20:29.000000000 +0900
@@ -0,0 +1,80 @@
+/* defines for inline arch setup functions */
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs: standard registers from interrupt
+ *
+ * Description:
+ * This hook is called immediately after the timer interrupt is ack'd.
+ * It's primary purpose is to allow architectures that don't possess
+ * individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ * timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ do_timer(regs);
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+ x86_do_profile(regs);
+#else
+ if (!using_apic_timer)
+ smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count: hardware timer interrupt count on overflow
+ *
+ * Description:
+ * This call is invoked when the jiffies count has not incremented but
+ * the hardware timer interrupt has. It means that a timer tick interrupt
+ * came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+ int i;
+
+ spin_lock(&i8259A_lock);
+ /*
+ * This is tricky when I/O APICs are used;
+ * see do_timer_interrupt().
+ */
+ i = inb(0x00);
+ spin_unlock(&i8259A_lock);
+
+ /* assumption about timer being IRQ0 */
+ if (i & 0x01) {
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+#ifdef BUGGY_NEPTUN_TIMER
+ /*
+ * for the Neptun bug we know that the 'latch'
+ * command doesnt latch the high and low value
+ * of the counter atomically. Thus we have to
+ * substract 256 from the counter
+ * ... funny, isnt it? :)
+ */
+
+ count -= 256;
+#else
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+ }
+ return count;
+}
diff -Nru linux/include/asm-i386/mach-pc9800/calibrate_tsc.h linux98/include/asm-i386/mach-pc9800/calibrate_tsc.h
--- linux/include/asm-i386/mach-pc9800/calibrate_tsc.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/calibrate_tsc.h 2002-11-05 22:19:50.000000000 +0900
@@ -0,0 +1,71 @@
+/*
+ * include/asm-i386/mach-pc9800/calibrate_tsc.h
+ *
+ * Machine specific calibrate_tsc() for PC-9800.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C.
+ * PC-9800:
+ * CTC cannot be used because some models (especially
+ * note-machines) may disable clock to speaker channel (#1)
+ * unless speaker is enabled. We use ARTIC instead.
+ */
+#ifndef _MACH_CALIBRATE_TSC_H
+#define _MACH_CALIBRATE_TSC_H
+
+#define CALIBRATE_LATCH (5 * 307200/HZ) /* 0.050sec * 307200Hz = 15360 */
+#define CALIBRATE_TIME (5 * 1000020/HZ)
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+
+static inline unsigned long mach_calibrate_tsc(void)
+{
+
+ unsigned long startlow, starthigh;
+ unsigned long endlow, endhigh;
+ unsigned short count;
+
+ for (count = inw(0x5c); inw(0x5c) == count; )
+ ;
+ rdtsc(startlow,starthigh);
+ count = inw(0x5c);
+ while ((unsigned short)(inw(0x5c) - count) < CALIBRATE_LATCH)
+ ;
+ rdtsc(endlow,endhigh);
+
+ last_tsc_low = endlow;
+
+ /* 64-bit subtract - gcc just messes up with long longs */
+ __asm__("subl %2,%0\n\t"
+ "sbbl %3,%1"
+ :"=a" (endlow), "=d" (endhigh)
+ :"g" (startlow), "g" (starthigh),
+ "0" (endlow), "1" (endhigh));
+
+ /* Error: ECPUTOOFAST */
+ if (endhigh)
+ goto bad_ctc;
+
+ /* Error: ECPUTOOSLOW */
+ if (endlow <= CALIBRATE_TIME)
+ goto bad_ctc;
+
+ __asm__("divl %2"
+ :"=a" (endlow), "=d" (endhigh)
+ :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+ return endlow;
+
+ /*
+ * The CTC wasn't reliable: we got a hit on the very first read,
+ * or the CPU was so fast/slow that the quotient wouldn't fit in
+ * 32 bits..
+ */
+bad_ctc:
+ return 0;
+}
+
+#endif /* !_MACH_CALIBRATE_TSC_H */
diff -Nru linux/include/asm-i386/timex.h linux98/include/asm-i386/timex.h
--- linux/include/asm-i386/timex.h 2002-02-14 18:09:15.000000000 +0900
+++ linux98/include/asm-i386/timex.h 2002-02-14 23:58:57.000000000 +0900
@@ -9,11 +9,15 @@
#include <linux/config.h>
#include <asm/msr.h>
+#ifdef CONFIG_X86_PC9800
+ extern int CLOCK_TICK_RATE;
+#else
#ifdef CONFIG_MELAN
# define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
#else
# define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
#endif
+#endif
#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
This is patchset to support NEC PC-9800 subarchitecture
against 2.5.60 (22/34).
Misc files for support PC98.
diff -Nru linux-2.5.60/kernel/timer.c linux98-2.5.60/kernel/timer.c
--- linux-2.5.60/kernel/timer.c 2003-02-11 03:38:50.000000000 +0900
+++ linux98-2.5.60/kernel/timer.c 2003-02-11 13:04:49.000000000 +0900
@@ -437,8 +437,13 @@
/*
* Timekeeping variables
*/
+#ifdef CONFIG_X86_PC9800
+extern unsigned long tick_usec; /* ACTHZ period (usec) */
+extern unsigned long tick_nsec; /* USER_HZ period (nsec) */
+#else
unsigned long tick_usec = TICK_USEC; /* ACTHZ period (usec) */
unsigned long tick_nsec = TICK_NSEC(TICK_USEC); /* USER_HZ period (nsec) */
+#endif
/* The current time */
struct timespec xtime __attribute__ ((aligned (16)));
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Feb 23 2003 - 22:00:38 EST