On Thu, 6 Feb 2003, AU wrote:
> Try to boot with apic=no or acpi=oldboot
like i do now with append noapic, it works ok
did some more tests today :
plugged the fasttrak tx4 into 3 different machines
all smp (dual p3/dual p2/dual xeon)
with all i get lost interrupts
if i boot with noapic problem is solved
(tried updating the bios for the promise, but doesn't help)
looks like there is really something wrong with the (bios?) tx4
i have 3 of these cards here
putting 2 together in an mainbord also doesn't work (then the tx4 bios is
complaining about no assigned irq)
and if i use 1 card in a system, i always have to press 'esc' to continu
after the bios tells me there is no array
i really think i should have bought the highpoint 4 port cards :(
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Feb 07 2003 - 22:00:21 EST