Re: 2.5.54 problem with IDE ICH4 and aic7xxx

From: Gregoire Favre (greg@ulima.unil.ch)
Date: Sun Jan 05 2003 - 13:52:27 EST


On Sun, Jan 05, 2003 at 10:35:47AM -0700, Justin T. Gibbs wrote:

> Does the problem persist if you disable domain
> validation via SCSI-Select on your 29160?

Well, I put in http://ulima.unil.ch/greg/linux/2.5.54/dmesg-2.5.54-2
the new result: it's really worse:

aic7xxx: PCI Device 3:3:0 failed memory mapped test. Using PIO.
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
        <Adaptec 29160B Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
(scsi1:A:1:0): refuses WIDE negotiation. Using 8bit transfers
(scsi1:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
(scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 8)
(scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 8)
(scsi0:A:15): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  Vendor: IBM Model: DDRS-39130D Rev: DC1B
  Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
  Vendor: SEAGATE Model: ST336706LW Rev: 0108
  Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:15:0: Tagged Queuing enabled. Depth 253
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs

scsi1:A:10:0: DV failed to configure device. Please file a bug report against this
 driver.
  Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04
  Type: CD-ROM ANSI SCSI revision: 02
  Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
  Type: CD-ROM ANSI SCSI revision: 02
  Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
  Type: CD-ROM ANSI SCSI revision: 02
SCSI device sda: drive cache: write through
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
 /dev/scsi/host0/bus0/target0/lun0: p1 p2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: drive cache: write back
SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB)
 /dev/scsi/host0/bus0/target15/lun0: p1 p2
Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0
sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0
sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0
device class 'input': registering
register interface 'mouse' with class 'input'

I still have the :

aic7xxx: PCI Device 3:3:0 failed memory mapped test. Using PIO.

But now I have the:

scsi1:A:10:0: DV failed to configure device. Please file a bug report against this driver.

But I don't know what that mean...

cat /proc/scsi/scsi gives me:

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM Model: DDRS-39130D Rev: DC1B
  Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 15 Lun: 00
  Vendor: SEAGATE Model: ST336706LW Rev: 0108
  Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
  Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 02 Lun: 00
  Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
  Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
  Type: CD-ROM ANSI SCSI revision: 02

Thank you very much,

        Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Jan 07 2003 - 22:00:28 EST