J.A. Magallon wrote:
> On 2003.01.04 Andrew S. Johnson wrote:
>
>>I have append="hdc=ide-scsi" in my lilo.conf file,
>>but when I modprobe ide-scsi, it grabs both the
>>CD-RW and the DVD-ROM:
>>
>
>
> I think the correct param is "hdc=scsi", with incorrect param and no
> ide-cd loaded, probably ide-scsi grabs anything it can...
>
Actually, I guessed on my own, and this solves it:
append="hdc=ide-scsi hdd=ide-cd" in lilo.conf
In rc.modules:
/sbin/modprobe ide-scsi
/sbin/modprobe ide-cd
Gives this in dmesg:
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
I don't actually know if the hdd=ide-cd does anything for the ide-cd
module, other than keep the ide-scsi module from grabbing it.
Conversely, the ide-cd module only grabs hdd even when the ide-scsi
module is not loaded (making hdc free). So it appears to do something.
As it turns out, the latest version of cdrtools (2.0) supports ATAPI
drives directly. I tested this by burning an ISO, reading it back, and
comparing the md5sums. So the whole ide-scsi exersice looks to be
academic at this point.
Have fun,
Andy Johnson
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jan 07 2003 - 22:00:27 EST