Ide problems

From: Jarmo Järvenpää (Jarmo.Jarvenpaa@softers.net)
Date: Tue Dec 31 2002 - 03:32:45 EST


Hi

I've been buggered with multiple lockups of an med/heavily loaded 2.4.19
(also rc-series) and same server with 2.4.20. Machine is running
normally for a week or two, then IDE light is lit and processes are
stuck in D state (if any disk activity is required -> freezed process).
I'm using (ide-) software raid 1 and 5, tested with raid 1 alone and
same lockup-problem appears.

So, IDE-light is continuously lit but the disks are not reading nor
writing. Emergency sync nor the unmount is working. I'm guessing the
IDE-code (eh, raid too) might be cause of this.
- No OOM situation have been observed, there's been lots of free ram at
the time of each lockup.
- Processes with no disk activity are not affected (for examples vmstat
1 runs ok if started before lockup)

Currently I'm thinking of falling back to .18 with hopes of no more
problems.

Any similar experiences?

Regards,
Jarmo

PS. An extremely useful feature would be a method to freeze raid resync
until fsck is finished. Now, when both are running at the same time
server's boot speed is miserable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Dec 31 2002 - 22:00:19 EST