Move more M68k SCSI host template definitions from the device-specific header
files to the source files:
- Amiga A3000, A2091/A590, A4000, A4091, GVP II, and WarpEngine SCSI
- Atari NCR5380 SCSI
- MVME147, MVME16x, and BVME6000 SCSI
- Mac NCR5380 SCSI
- Sun-3/3x OBIO and VME SCSI
--- linux-2.5.53/drivers/scsi/a2091.c Fri Dec 27 14:17:35 2002
+++ linux-m68k-2.5.53/drivers/scsi/a2091.c Wed Nov 20 11:36:29 2002
@@ -231,7 +231,21 @@
#define HOSTS_C
-static Scsi_Host_Template driver_template = A2091_SCSI;
+static Scsi_Host_Template driver_template = {
+ .proc_name = "A2901",
+ .name = "Commodore A2091/A590 SCSI",
+ .detect = a2091_detect,
+ .release = a2091_release,
+ .queuecommand = wd33c93_queuecommand,
+ .abort = wd33c93_abort,
+ .reset = wd33c93_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/a2091.h Fri Dec 20 11:42:34 2002
+++ linux-m68k-2.5.53/drivers/scsi/a2091.h Fri Dec 20 14:27:06 2002
@@ -30,19 +30,6 @@
#define CAN_QUEUE 16
#endif
-#define A2091_SCSI { .proc_name = "A2901", \
- .name = "Commodore A2091/A590 SCSI", \
- .detect = a2091_detect, \
- .release = a2091_release, \
- .queuecommand = wd33c93_queuecommand, \
- .abort = wd33c93_abort, \
- .reset = wd33c93_reset, \
- .can_queue = CAN_QUEUE, \
- .this_id = 7, \
- .sg_tablesize = SG_ALL, \
- .cmd_per_lun = CMD_PER_LUN, \
- .use_clustering = DISABLE_CLUSTERING }
-
/*
* if the transfer address ANDed with this results in a non-zero
* result, then we can't use DMA.
--- linux-2.5.53/drivers/scsi/a3000.c Fri Dec 27 14:17:35 2002
+++ linux-m68k-2.5.53/drivers/scsi/a3000.c Wed Nov 20 11:36:29 2002
@@ -207,7 +207,21 @@
#define HOSTS_C
-static Scsi_Host_Template driver_template = _A3000_SCSI;
+static Scsi_Host_Template driver_template = {
+ .proc_name = "A3000",
+ .name = "Amiga 3000 built-in SCSI",
+ .detect = a3000_detect,
+ .release = a3000_release,
+ .queuecommand = wd33c93_queuecommand,
+ .abort = wd33c93_abort,
+ .reset = wd33c93_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING
+};
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/a3000.h Fri Dec 20 11:42:34 2002
+++ linux-m68k-2.5.53/drivers/scsi/a3000.h Fri Dec 20 14:27:46 2002
@@ -30,20 +30,6 @@
#define CAN_QUEUE 16
#endif
-#define _A3000_SCSI { .proc_name = "A3000", \
- .proc_info = NULL, \
- .name = "Amiga 3000 built-in SCSI", \
- .detect = a3000_detect, \
- .release = a3000_release, \
- .queuecommand = wd33c93_queuecommand, \
- .abort = wd33c93_abort, \
- .reset = wd33c93_reset, \
- .can_queue = CAN_QUEUE, \
- .this_id = 7, \
- .sg_tablesize = SG_ALL, \
- .cmd_per_lun = CMD_PER_LUN, \
- .use_clustering = ENABLE_CLUSTERING }
-
/*
* if the transfer address ANDed with this results in a non-zero
* result, then we can't use DMA.
--- linux-2.5.53/drivers/scsi/amiga7xx.c Mon May 13 10:55:33 2002
+++ linux-m68k-2.5.53/drivers/scsi/amiga7xx.c Wed Nov 20 11:36:29 2002
@@ -134,5 +134,18 @@
return num;
}
-static Scsi_Host_Template driver_template = AMIGA7XX_SCSI;
+static Scsi_Host_Template driver_template = {
+ .name = "Amiga NCR53c710 SCSI",
+ .detect = amiga7xx_detect,
+ .queuecommand = NCR53c7xx_queue_command,
+ .abort = NCR53c7xx_abort,
+ .reset = NCR53c7xx_reset,
+ .can_queue = 24,
+ .this_id = 7,
+ .sg_tablesize = 63,
+ .cmd_per_lun = 3,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/amiga7xx.h Fri Dec 20 11:42:34 2002
+++ linux-m68k-2.5.53/drivers/scsi/amiga7xx.h Fri Dec 20 14:28:14 2002
@@ -24,15 +24,4 @@
#include <scsi/scsicam.h>
-#define AMIGA7XX_SCSI {.name = "Amiga NCR53c710 SCSI", \
- .detect = amiga7xx_detect, \
- .queuecommand = NCR53c7xx_queue_command, \
- .abort = NCR53c7xx_abort, \
- .reset = NCR53c7xx_reset, \
- .can_queue = 24, \
- .this_id = 7, \
- .sg_tablesize = 63, \
- .cmd_per_lun = 3, \
- .use_clustering = DISABLE_CLUSTERING }
-
#endif /* AMIGA7XX_H */
--- linux-2.5.53/drivers/scsi/atari_scsi.c Fri Dec 27 14:17:42 2002
+++ linux-m68k-2.5.53/drivers/scsi/atari_scsi.c Wed Nov 20 11:36:29 2002
@@ -1139,7 +1139,23 @@
#include "atari_NCR5380.c"
-static Scsi_Host_Template driver_template = ATARI_SCSI;
+static Scsi_Host_Template driver_template = {
+ .proc_info = atari_scsi_proc_info,
+ .name = "Atari native SCSI",
+ .detect = atari_scsi_detect,
+ .release = atari_scsi_release,
+ .info = atari_scsi_info,
+ .queuecommand = atari_scsi_queue_command,
+ .abort = atari_scsi_abort,
+ .reset = atari_scsi_reset,
+ .can_queue = 0, /* initialized at run-time */
+ .this_id = 0, /* initialized at run-time */
+ .sg_tablesize = 0, /* initialized at run-time */
+ .cmd_per_lun = 0, /* initialized at run-time */
+ .use_clustering = DISABLE_CLUSTERING
+};
+
+
#include "scsi_module.c"
MODULE_LICENSE("GPL");
--- linux-2.5.53/drivers/scsi/atari_scsi.h Fri Dec 20 11:42:34 2002
+++ linux-m68k-2.5.53/drivers/scsi/atari_scsi.h Fri Dec 20 14:28:58 2002
@@ -51,20 +51,6 @@
#define DEFAULT_USE_TAGGED_QUEUING 0
-#define ATARI_SCSI { .proc_info = atari_scsi_proc_info, \
- .name = "Atari native SCSI", \
- .detect = atari_scsi_detect, \
- .release = atari_scsi_release, \
- .info = atari_scsi_info, \
- .queuecommand = atari_scsi_queue_command, \
- .abort = atari_scsi_abort, \
- .reset = atari_scsi_reset, \
- .can_queue = 0, /* initialized at run-time */ \
- .this_id = 0, /* initialized at run-time */ \
- .sg_tablesize = 0, /* initialized at run-time */ \
- .cmd_per_lun = 0, /* initialized at run-time */ \
- .use_clustering = DISABLE_CLUSTERING }
-
#define NCR5380_implementation_fields /* none */
#define NCR5380_read(reg) atari_scsi_reg_read( reg )
--- linux-2.5.53/drivers/scsi/bvme6000.c Thu Jul 25 12:53:54 2002
+++ linux-m68k-2.5.53/drivers/scsi/bvme6000.c Wed Nov 20 11:36:29 2002
@@ -51,5 +51,18 @@
return 1;
}
-static Scsi_Host_Template driver_template = BVME6000_SCSI;
+static Scsi_Host_Template driver_template = {
+ .name = "BVME6000 NCR53c710 SCSI",
+ .detect = bvme6000_scsi_detect,
+ .queuecommand = NCR53c7xx_queue_command,
+ .abort = NCR53c7xx_abort,
+ .reset = NCR53c7xx_reset,
+ .can_queue = 24,
+ .this_id = 7,
+ .sg_tablesize = 63,
+ .cmd_per_lun = 3,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/bvme6000.h Fri Dec 20 11:42:34 2002
+++ linux-m68k-2.5.53/drivers/scsi/bvme6000.h Fri Dec 20 14:31:43 2002
@@ -25,15 +25,4 @@
#include <scsi/scsicam.h>
-#define BVME6000_SCSI {.name = "BVME6000 NCR53c710 SCSI", \
- .detect = bvme6000_scsi_detect, \
- .queuecommand = NCR53c7xx_queue_command, \
- .abort = NCR53c7xx_abort, \
- .reset = NCR53c7xx_reset, \
- .can_queue = 24, \
- .this_id = 7, \
- .sg_tablesize = 63, \
- .cmd_per_lun = 3, \
- .use_clustering = DISABLE_CLUSTERING }
-
#endif /* BVME6000_SCSI_H */
--- linux-2.5.53/drivers/scsi/gvp11.c Fri Dec 27 14:17:35 2002
+++ linux-m68k-2.5.53/drivers/scsi/gvp11.c Wed Nov 20 11:36:29 2002
@@ -356,7 +356,21 @@
#include "gvp11.h"
-static Scsi_Host_Template driver_template = GVP11_SCSI;
+static Scsi_Host_Template driver_template = {
+ .proc_name = "GVP11",
+ .name = "GVP Series II SCSI",
+ .detect = gvp11_detect,
+ .release = gvp11_release,
+ .queuecommand = wd33c93_queuecommand,
+ .abort = wd33c93_abort,
+ .reset = wd33c93_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/gvp11.h Fri Dec 20 11:42:34 2002
+++ linux-m68k-2.5.53/drivers/scsi/gvp11.h Fri Dec 20 14:35:20 2002
@@ -30,21 +30,7 @@
#define CAN_QUEUE 16
#endif
-#ifdef HOSTS_C
-
-#define GVP11_SCSI { .proc_name = "GVP11", \
- .name = "GVP Series II SCSI", \
- .detect = gvp11_detect, \
- .release = gvp11_release, \
- .queuecommand = wd33c93_queuecommand, \
- .abort = wd33c93_abort, \
- .reset = wd33c93_reset, \
- .can_queue = CAN_QUEUE, \
- .this_id = 7, \
- .sg_tablesize = SG_ALL, \
- .cmd_per_lun = CMD_PER_LUN, \
- .use_clustering = DISABLE_CLUSTERING }
-#else
+#ifndef HOSTS_C
/*
* if the transfer address ANDed with this results in a non-zero
--- linux-2.5.53/drivers/scsi/mac_NCR5380.c Fri Dec 27 14:17:42 2002
+++ linux-m68k-2.5.53/drivers/scsi/mac_NCR5380.c Wed Nov 20 11:36:30 2002
@@ -3117,7 +3117,21 @@
#endif /* 1 */
}
-static Scsi_Host_Template driver_template = MAC_NCR5380;
+static Scsi_Host_Template driver_template = {
+ .name = "Macintosh NCR5380 SCSI",
+ .detect = macscsi_detect,
+ .release = macscsi_release,
+ .info = macscsi_info,
+ .queuecommand = macscsi_queue_command,
+ .abort = macscsi_abort,
+ .reset = macscsi_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/mvme147.c Fri Dec 27 14:17:35 2002
+++ linux-m68k-2.5.53/drivers/scsi/mvme147.c Wed Nov 20 11:36:30 2002
@@ -116,7 +116,21 @@
#include "mvme147.h"
-static Scsi_Host_Template driver_template = MVME147_SCSI;
+static Scsi_Host_Template driver_template = {
+ .proc_name = "MVME147",
+ .name = "MVME147 built-in SCSI",
+ .detect = mvme147_detect,
+ .release = mvme147_release,
+ .queuecommand = wd33c93_queuecommand,
+ .abort = wd33c93_abort,
+ .reset = wd33c93_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING
+};
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/mvme147.h Fri Dec 20 11:42:35 2002
+++ linux-m68k-2.5.53/drivers/scsi/mvme147.h Fri Dec 20 14:38:40 2002
@@ -29,22 +29,4 @@
#define CAN_QUEUE 16
#endif
-#ifdef HOSTS_C
-
-#define MVME147_SCSI {.proc_name = "MVME147", \
- .proc_info = NULL, \
- .name = "MVME147 built-in SCSI", \
- .detect = mvme147_detect, \
- .release = mvme147_release, \
- .queuecommand = wd33c93_queuecommand, \
- .abort = wd33c93_abort, \
- .reset = wd33c93_reset, \
- .can_queue = CAN_QUEUE, \
- .this_id = 7, \
- .sg_tablesize = SG_ALL, \
- .cmd_per_lun = CMD_PER_LUN, \
- .use_clustering = ENABLE_CLUSTERING }
-
-#endif /* else def HOSTS_C */
-
#endif /* MVME147_H */
--- linux-2.5.53/drivers/scsi/mvme16x.c Thu Jul 25 12:53:56 2002
+++ linux-m68k-2.5.53/drivers/scsi/mvme16x.c Wed Nov 20 11:36:31 2002
@@ -53,5 +53,18 @@
return 1;
}
-static Scsi_Host_Template driver_template = MVME16x_SCSI;
+static Scsi_Host_Template driver_template = {
+ .name = "MVME16x NCR53c710 SCSI",
+ .detect = mvme16x_scsi_detect,
+ .queuecommand = NCR53c7xx_queue_command,
+ .abort = NCR53c7xx_abort,
+ .reset = NCR53c7xx_reset,
+ .can_queue = 24,
+ .this_id = 7,
+ .sg_tablesize = 63,
+ .cmd_per_lun = 3,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/mvme16x.h Fri Dec 20 11:42:35 2002
+++ linux-m68k-2.5.53/drivers/scsi/mvme16x.h Fri Dec 20 14:39:02 2002
@@ -25,15 +25,4 @@
#include <scsi/scsicam.h>
-#define MVME16x_SCSI {.name = "MVME16x NCR53c710 SCSI", \
- .detect = mvme16x_scsi_detect, \
- .queuecommand = NCR53c7xx_queue_command, \
- .abort = NCR53c7xx_abort, \
- .reset = NCR53c7xx_reset, \
- .can_queue = 24, \
- .this_id = 7, \
- .sg_tablesize = 63, \
- .cmd_per_lun = 3, \
- .use_clustering = DISABLE_CLUSTERING }
-
#endif /* MVME16x_SCSI_H */
--- linux-2.5.53/drivers/scsi/sun3_scsi.c Fri Dec 27 14:17:42 2002
+++ linux-m68k-2.5.53/drivers/scsi/sun3_scsi.c Wed Nov 20 11:36:31 2002
@@ -615,7 +615,21 @@
#include "sun3_NCR5380.c"
-static Scsi_Host_Template driver_template = SUN3_NCR5380;
+static Scsi_Host_Template driver_template = {
+ .name = SUN3_SCSI_NAME,
+ .detect = sun3scsi_detect,
+ .release = sun3scsi_release,
+ .info = sun3scsi_info,
+ .queuecommand = sun3scsi_queue_command,
+ .abort = sun3scsi_abort,
+ .reset = sun3scsi_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_TABLESIZE,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
#include "scsi_module.c"
--- linux-2.5.53/drivers/scsi/sun3_scsi.h Tue Nov 5 10:10:06 2002
+++ linux-m68k-2.5.53/drivers/scsi/sun3_scsi.h Wed Nov 20 11:36:31 2002
@@ -93,22 +93,6 @@
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
#endif
-#define SUN3_NCR5380 { \
-.name = SUN3_SCSI_NAME, \
-.detect = sun3scsi_detect, \
-.release = sun3scsi_release, /* Release */ \
-.info = sun3scsi_info, \
-.queuecommand = sun3scsi_queue_command, \
-.abort = sun3scsi_abort, \
-.reset = sun3scsi_reset, \
-.can_queue = CAN_QUEUE, /* can queue */ \
-.this_id = 7, /* id */ \
-.sg_tablesize = SG_TABLESIZE, /* sg_tablesize */ \
-.cmd_per_lun = CMD_PER_LUN, /* cmd per lun */ \
-.unchecked_isa_dma = 0, /* unchecked_isa_dma */ \
-.use_clustering = DISABLE_CLUSTERING \
- }
-
#ifndef HOSTS_C
#define NCR5380_implementation_fields \
--- linux-2.5.53/drivers/scsi/sun3_scsi_vme.c Fri Dec 27 14:17:42 2002
+++ linux-m68k-2.5.53/drivers/scsi/sun3_scsi_vme.c Wed Nov 20 11:36:31 2002
@@ -560,7 +560,21 @@
#include "sun3_NCR5380.c"
-static Scsi_Host_Template driver_template = SUN3_NCR5380;
+static Scsi_Host_Template driver_template = {
+ .name = SUN3_SCSI_NAME,
+ .detect = sun3scsi_detect,
+ .release = sun3scsi_release,
+ .info = sun3scsi_info,
+ .queuecommand = sun3scsi_queue_command,
+ .abort = sun3scsi_abort,
+ .reset = sun3scsi_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_TABLESIZE,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = DISABLE_CLUSTERING
+};
+
#include "scsi_module.c"
Gr{oetje,eeting}s,
Geert
-- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.orgIn personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Dec 31 2002 - 22:00:10 EST