Linux version 2.4.20-tridentfix (root@bologoe.karpelevitch.net) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue Dec 10 15:08:22 PST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eef0000 (usable) BIOS-e820: 000000000eef0000 - 000000000eeff000 (ACPI data) BIOS-e820: 000000000eeff000 - 000000000ef00000 (ACPI NVS) BIOS-e820: 000000000ef00000 - 000000000f000000 (usable) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 240MB LOWMEM available. On node 0 totalpages: 61440 zone(0): 4096 pages. zone(1): 57344 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux ro root=302 ide0=ata66 ide1=ata66 ide_setup: ide0=ata66 ide_setup: ide1=ata66 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1325.116 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 2641.10 BogoMIPS Memory: 240568k/245760k available (1192k kernel code, 4736k reserved, 360k data, 264k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU: AMD Mobile AMD Athlon(tm) XP 1500+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1325.1467 MHz. ..... host bus clock speed is 265.0292 MHz. cpu: 0, clocks: 2650292, slice: 1325146 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd87e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router ALI [10b9/1533] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled ACPI: System firmware supports S0 S3 S4 S5 Processor[0]: C0 C1, 8 throttling states ACPI: AC Adapter found ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found ACPI: Sleep Button (FF) found ACPI: Multiple sleep buttons detected, ignoring fixed-feature ACPI: Sleep Button (CM) found ACPI: Lid Switch (CM) found pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller on PCI bus 00 dev 80 PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using pci=biosirq. ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ALI15X3: ATA-66/100 forced bit set (WARNING)!! ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio ALI15X3: ATA-66/100 forced bit set (WARNING)!! ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio hda: FUJITSU MHR2030AT, ATA DISK drive hdc: Compaq DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63 hdc: ATAPI 24X DVD-ROM drive, 192kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 > p4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 190M agpgart: unsupported bridge agpgart: no supported devices found. [drm] Initialized radeon 1.1.1 20010405 on minor 0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 264k freed Adding Swap: 289128k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002) PCI: Assigned IRQ 11 for device 00:0b.0 IRQ routing conflict for 00:0c.0, have irq 10, want irq 11 IRQ routing conflict for 01:05.0, have irq 10, want irq 11 eth0: RTL-8139C+ at 0xcf848000, 00:08:02:f3:99:58, IRQ 11 Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 15:13:01 Dec 10 2002 PCI: Found IRQ 4 for device 00:08.0 IRQ routing conflict for 00:08.0, have irq 5, want irq 4 trident: ALi Audio Accelerator found at IO 0x8400, IRQ 5 ac97_codec: AC97 Audio codec, id: ADS97(Analog Devices AD1886) spurious 8259A interrupt: IRQ7. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link down eth0: link down mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available