ISAPNP/ALSA hasn't been working for a while now (cards didn't get
detected), here is a patch to update OPL3SA2 to the new PnP layer.
ALSA device list:
#0: Yamaha OPL3-SA23 at 0x100, irq 5, dma 1&3
Driver tested in kernel and modular, i have tried to maintain
detection/resource override semantics and general detection code
paths.
Regards,
Zwane Mwaikambo
Index: linux-2.5.50/sound/isa/opl3sa2.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.50/sound/isa/opl3sa2.c,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 opl3sa2.c
--- linux-2.5.50/sound/isa/opl3sa2.c 28 Nov 2002 01:36:04 -0000 1.1.1.1
+++ linux-2.5.50/sound/isa/opl3sa2.c 30 Nov 2002 11:51:30 -0000
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <linux/slab.h>
+#include <linux/pnp.h>
#ifndef LINUX_ISAPNP_H
#include <linux/isapnp.h>
#define isapnp_card pci_bus
@@ -135,6 +136,7 @@
typedef struct snd_opl3sa2 opl3sa2_t;
#define chip_t opl3sa2_t
+int nr_cards;
struct snd_opl3sa2 {
snd_card_t *card;
@@ -148,7 +150,7 @@
snd_rawmidi_t *rmidi;
cs4231_t *cs4231;
#ifdef __ISAPNP__
- struct isapnp_dev *dev;
+ struct pnp_dev *dev;
#endif
unsigned char ctlregs[0x20];
int ymode; /* SL added */
@@ -164,30 +166,28 @@
static snd_card_t *snd_opl3sa2_cards[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
#ifdef __ISAPNP__
+static struct pnp_dev *snd_opl3sa2_isapnp_devs[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PTR;
-static struct isapnp_card *snd_opl3sa2_isapnp_cards[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PTR;
-static const struct isapnp_card_id *snd_opl3sa2_isapnp_id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PTR;
-
-#define ISAPNP_OPL3SA2(_va, _vb, _vc, _device, _function) \
- { \
- ISAPNP_CARD_ID(_va, _vb, _vc, _device), \
- devs : { ISAPNP_DEVICE_ID(_va, _vb, _vc, _function), } \
- }
-
-static struct isapnp_card_id snd_opl3sa2_pnpids[] __devinitdata = {
+/* Please try and keep the 1:1 mapping with the dev listing below */
+static const struct pnp_id pnp_opl3sa2_cards[] = {
/* Yamaha YMF719E-S (Genius Sound Maker 3DX) */
- ISAPNP_OPL3SA2('Y','M','H',0x0020,0x0021),
+ {.id = "YMH0020", .driver_data = 0},
/* Yamaha OPL3-SA3 (integrated on Intel's Pentium II AL440LX motherboard) */
- ISAPNP_OPL3SA2('Y','M','H',0x0030,0x0021),
+ {.id = "YMH0030", .driver_data = 0},
/* Yamaha OPL3-SA2 */
- ISAPNP_OPL3SA2('Y','M','H',0x0800,0x0021),
+ {.id = "YMH0800", .driver_data = 0},
/* NeoMagic MagicWave 3DX */
- ISAPNP_OPL3SA2('N','M','X',0x2200,0x2210),
- /* --- */
- { ISAPNP_CARD_END, } /* end */
+ {.id = "NMX2200", .driver_data = 0},
+ {"", 0}
};
-ISAPNP_CARD_TABLE(snd_opl3sa2_pnpids);
+static const struct pnp_id pnp_opl3sa2_devs[] = {
+ {.id = "YMH0021", .driver_data = 0},
+ {.id = "YMH0021", .driver_data = 0},
+ {.id = "YMH0021", .driver_data = 0},
+ {.id = "NMX2210", .driver_data = 0},
+ {"", 0}
+};
#endif /* __ISAPNP__ */
@@ -634,22 +634,42 @@
#endif /* CONFIG_PM */
+static int snd_opl3sa2_free(opl3sa2_t *chip)
+{
+#ifdef __ISAPNP__
+ pnp_disable_dev(chip->dev);
+ pnp_remove_device(chip->dev);
+#endif
+#ifdef CONFIG_PM
+ if (chip->pm_dev)
+ pm_unregister(chip->pm_dev);
+#endif
+ if (chip->irq >= 0)
+ free_irq(chip->irq, (void *)chip);
+ if (chip->res_port) {
+ release_resource(chip->res_port);
+ kfree_nocheck(chip->res_port);
+ }
+
+ snd_magic_kfree(chip);
+ return 0;
+}
+
+static int snd_opl3sa2_dev_free(snd_device_t *device)
+{
+ opl3sa2_t *chip = snd_magic_cast(opl3sa2_t, device->device_data, return -ENXIO);
+ return snd_opl3sa2_free(chip);
+}
+
#ifdef __ISAPNP__
static int __init snd_opl3sa2_isapnp(int dev, opl3sa2_t *chip)
{
- const struct isapnp_card_id *id = snd_opl3sa2_isapnp_id[dev];
- struct isapnp_card *card = snd_opl3sa2_isapnp_cards[dev];
- struct isapnp_dev *pdev;
+ int res = 0;
+ struct pnp_dev *pdev = snd_opl3sa2_isapnp_devs[dev];
+
+ if (!enable[dev])
+ return -ENODEV;
- chip->dev = isapnp_find_dev(card, id->devs[0].vendor, id->devs[0].function, NULL);
- if (chip->dev->active) {
- chip->dev = NULL;
- return -EBUSY;
- }
- /* PnP initialization */
- pdev = chip->dev;
- if (pdev->prepare(pdev)<0)
- return -EAGAIN;
if (sb_port[dev] != SNDRV_AUTO_PORT)
isapnp_resource_change(&pdev->resource[0], sb_port[dev], 16);
if (wss_port[dev] != SNDRV_AUTO_PORT)
@@ -666,59 +686,27 @@
isapnp_resource_change(&pdev->dma_resource[1], dma2[dev], 1);
if (irq[dev] != SNDRV_AUTO_IRQ)
isapnp_resource_change(&pdev->irq_resource[0], irq[dev], 1);
- if (pdev->activate(pdev)<0) {
- snd_printk("isapnp configure failure (out of resources?)\n");
- return -EBUSY;
- }
- sb_port[dev] = pdev->resource[0].start;
- wss_port[dev] = pdev->resource[1].start;
- fm_port[dev] = pdev->resource[2].start;
- midi_port[dev] = pdev->resource[3].start;
- port[dev] = pdev->resource[4].start;
+
+ sb_port[dev] = pci_resource_start(pdev, 0);
+ wss_port[dev] = pci_resource_start(pdev, 1);
+ fm_port[dev] = pci_resource_start(pdev, 2);
+ midi_port[dev] = pci_resource_start(pdev, 3);
+ port[dev] = pci_resource_start(pdev, 4);
dma1[dev] = pdev->dma_resource[0].start;
dma2[dev] = pdev->dma_resource[1].start;
irq[dev] = pdev->irq_resource[0].start;
+
snd_printdd("isapnp OPL3-SA: sb port=0x%lx, wss port=0x%lx, fm port=0x%lx, midi port=0x%lx\n",
sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]);
snd_printdd("isapnp OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n",
port[dev], dma1[dev], dma2[dev], irq[dev]);
- return 0;
-}
-
-static void snd_opl3sa2_deactivate(opl3sa2_t *chip)
-{
- if (chip->dev) {
- chip->dev->deactivate(chip->dev);
- chip->dev = NULL;
- }
+ chip->dev = pdev;
+
+out_error:
+ return res;
}
#endif /* __ISAPNP__ */
-static int snd_opl3sa2_free(opl3sa2_t *chip)
-{
-#ifdef __ISAPNP__
- snd_opl3sa2_deactivate(chip);
-#endif
-#ifdef CONFIG_PM
- if (chip->pm_dev)
- pm_unregister(chip->pm_dev);
-#endif
- if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
- if (chip->res_port) {
- release_resource(chip->res_port);
- kfree_nocheck(chip->res_port);
- }
- snd_magic_kfree(chip);
- return 0;
-}
-
-static int snd_opl3sa2_dev_free(snd_device_t *device)
-{
- opl3sa2_t *chip = snd_magic_cast(opl3sa2_t, device->device_data, return -ENXIO);
- return snd_opl3sa2_free(chip);
-}
-
static int __init snd_opl3sa2_probe(int dev)
{
int xirq, xdma1, xdma2;
@@ -763,7 +751,9 @@
err = -ENOMEM;
goto __error;
}
+ spin_lock_init(&chip->reg_lock);
chip->irq = -1;
+
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0)
goto __error;
#ifdef __ISAPNP__
@@ -855,30 +845,47 @@
}
#ifdef __ISAPNP__
-static int __init snd_opl3sa2_isapnp_detect(struct isapnp_card *card,
- const struct isapnp_card_id *id)
+static int pnp_opl3sa2_probe(struct pnp_dev *pdev, const struct pnp_id *card_id,
+ const struct pnp_id *dev_id)
{
- static int dev;
+ static int dev;
int res;
for ( ; dev < SNDRV_CARDS; dev++) {
if (!enable[dev])
continue;
- snd_opl3sa2_isapnp_cards[dev] = card;
- snd_opl3sa2_isapnp_id[dev] = id;
+ snd_opl3sa2_isapnp_devs[dev] = pdev;
res = snd_opl3sa2_probe(dev);
if (res < 0)
return res;
dev++;
+ nr_cards++;
return 0;
}
return -ENODEV;
}
+
+static void pnp_opl3sa2_remove(struct pnp_dev *pdev)
+{
+ opl3sa2_t *chip = pdev->driver_data;
+ if (chip)
+ chip->dev = NULL;
+ nr_cards--;
+}
+
+static struct pnp_driver snd_opl3sa2_pnp_driver = {
+ .name = "opl3sa2",
+ .card_id_table = pnp_opl3sa2_cards,
+ .id_table = pnp_opl3sa2_devs,
+ .probe = pnp_opl3sa2_probe,
+ .remove = pnp_opl3sa2_remove,
+};
+
#endif /* __ISAPNP__ */
static int __init alsa_card_opl3sa2_init(void)
{
- int dev, cards = 0;
+ int dev;
for (dev = 0; dev < SNDRV_CARDS; dev++) {
if (!enable[dev])
@@ -888,15 +895,19 @@
continue;
#endif
if (snd_opl3sa2_probe(dev) >= 0)
- cards++;
+ nr_cards++;
}
+
#ifdef __ISAPNP__
- cards += isapnp_probe_cards(snd_opl3sa2_pnpids, snd_opl3sa2_isapnp_detect);
+ /* upon registration the probe function will increment nr_cards */
+ pnp_register_driver(&snd_opl3sa2_pnp_driver);
#endif
- if (!cards) {
+
+ if (nr_cards == 0) {
#ifdef MODULE
printk(KERN_ERR "Yamaha OPL3-SA soundcard not found or device busy\n");
#endif
+ pnp_unregister_driver(&snd_opl3sa2_pnp_driver);
return -ENODEV;
}
return 0;
-- function.linuxpower.ca - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Nov 30 2002 - 22:00:24 EST