On Mon, 25 Nov 2002 16:11:49 +0100
Richard Mueller <mueller@teamix.net> wrote:
> Hello kernel-developers (esp. Donald ;) )
>
> I am experiencing very strange problems with the
> "D-Link DFE-580TX 4 port Server Adapter" in our enviroment.
>
> The kernel can only use the first three Ports. The forth Port
> is detected but reports some problems with the MII-Transciever.
>
> It should not be a NIC-hardwareproblem (used a second one - same
> problems).
>
> But read with your own eyes:
>
> host:~# cat /proc/version
> Linux version 2.4.20-rc2 (root@host) (gcc version 2.95.4 20011002 (Debian
> prerelease)) #3 SMP Mon Nov 25 14:20:56 CET 2002
>
> host:~# dmesg |grep eth
> eth0: OEM i82557/i82558 10/100 Ethernet, 00:20:ED:18:22:55, IRQ 30.
> eth1: OEM i82557/i82558 10/100 Ethernet, 00:20:ED:18:22:54, IRQ 29.
> eth2: D-Link DFE-580TX 4 port Server Adapter at 0xb800, 00:05:5d:64:9f:9d,
> IRQ 21. eth2: MII PHY found at address 1, status 0x782d advertising 01e1.
> eth3: D-Link DFE-580TX 4 port Server Adapter at 0xb400, 00:05:5d:64:9f:9c,
> IRQ 20. eth3: MII PHY found at address 1, status 0x782d advertising 01e1.
> eth4: D-Link DFE-580TX 4 port Server Adapter at 0xb000, 00:05:5d:64:9f:9b,
> IRQ 21. eth4: MII PHY found at address 1, status 0x782d advertising 01e1.
> eth5: D-Link DFE-580TX 4 port Server Adapter at 0xbe00, 00:00:00:00:00:00,
> IRQ 20. eth5: No MII transceiver found, aborting. ASIC status ffffffff
I have the same card, but used only 3 ports up to now, just tried the 4th - it
worked.
<6>eth0: D-Link DFE-580TX 4 port Server Adapter at 0xb800, 00:05:5d:5e:93:5c,
IRQ 9.
<6>eth0: MII PHY found at address 1, status 0x782d advertising 01e1.
<6>eth1: D-Link DFE-580TX 4 port Server Adapter at 0xb400, 00:05:5d:5e:93:5d,
IRQ 11.
<6>eth1: MII PHY found at address 1, status 0x782d advertising 01e1.
<6>eth2: D-Link DFE-580TX 4 port Server Adapter at 0xb000, 00:05:5d:5e:93:5e,
IRQ 10.
<6>eth2: MII PHY found at address 1, status 0x782d advertising 01e1.
<6>eth3: D-Link DFE-580TX 4 port Server Adapter at 0xa800, 00:05:5d:5e:93:5f,
IRQ 5.
<6>eth3: MII PHY found at address 1, status 0x7809 advertising 01e1.
Is it possible that you ran out of pci config space, i/o space? I don't quite
understand why your 4th port moved to 0xbe00 (after 3rd is 0xb000) ...
Can you play with the pci slots a bit (exchanging the cards)?
-- Regards, Stephan- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Nov 30 2002 - 22:00:10 EST