Re: aic7xxx driver error at boot for Adaptec AIC-7899P U160

From: Justin T. Gibbs (gibbs@scsiguy.com)
Date: Fri Nov 22 2002 - 18:57:57 EST

Next message: Russell King: "Re: Linux 2.4.20-rc3"
Previous message: Rod.VanMeter@nokia.com: "RE: Early determinition of bad sectors and correcting them ..."
In reply to: Bill Gardner: "aic7xxx driver error at boot for Adaptec AIC-7899P U160"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> Hello!
>
> We are seeing some strange errors at boot time from the aic7xxx driver.
>
> Relevant HW/SW Info:
>
> Host: Racksaver (Model: RS-1129) with dual AMD Athlon(tm) MP 2100+
> cpu's Motherboard: Tyan S2468 with an onboard Adaptec AIC-7899P U160/m
> (rev 01).
> Dist: Redhat 7.3
> Kernel: Linux version 2.4.18-3smp (bhcompile@porky.devel.redhat.com)
> (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 SMP Thu
> Apr 18 06:59:55 EDT 2002
>
> Relevant Console errors:
>
> scsi0:0:0:0: Attempting to queue an ABORT message
> scsi0: Dumping Card State while idle, at SEQADDR 0x44
>
> ...whole bunch of aic7xxx dump messages (see below for complete list)
>
> scsi0:0:0:0: Command already completed
> aic7xxx_abort returns 0x2002

Interrupts are not being routed correctly on your system. There's
not much the aic7xxx driver can do if interrupts don't work. One
of the Linux PCI wizards might be able to help you.

--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: Russell King: "Re: Linux 2.4.20-rc3"
Previous message: Rod.VanMeter@nokia.com: "RE: Early determinition of bad sectors and correcting them ..."
In reply to: Bill Gardner: "aic7xxx driver error at boot for Adaptec AIC-7899P U160"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:41 EST