> okay, my brain really shrinks; with only one hdd attached, you can't create an
> array. So here it seems to work out of the box. I just tried 2.4.20-rc-ac1,
> which detects my drive connected to that hpt374 (hde).
>
> Maybe you can give this one a try?
It's partially working with 2.4.20-rc2-ac1. Linux detects the HPT 372
controllers /from time to time/.
First (re)boot:
---
Linux version 2.4.20-rc2-ac1 (root@pikelot) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Tue Nov 19 20:19:24 CET 2002
[..]
PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Scanning bus 00
Found 00:00 [1106/3099] 000600 00
Found 00:08 [1106/b099] 000604 01
Found 00:40 [5333/8811] 000300 00
Found 00:60 [10ec/8139] 000200 00
Found 00:70 [1103/0008] 000104 00
Found 00:71 [1103/0008] 000104 00
Found 00:88 [1106/3177] 000601 00
Found 00:89 [1106/0571] 000101 00
Found 00:8d [1106/3059] 000401 00
Found 00:90 [1106/3065] 000200 00
Fixups for bus 00
Scanning behind PCI bridge 00:01.0, config 010100, pass 0
Scanning bus 01
Fixups for bus 01
Bus scan for 01 returning with max=01
Scanning behind PCI bridge 00:01.0, config 010100, pass 1
Bus scan for 00 returning with max=01
[..]
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT374: IDE controller at PCI slot 00:0e.0
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
HPT374: chipset revision 7
HPT374: not 100%% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:DMA, hdh:DMA
PCI: Found IRQ 10 for device 00:0e.1
PCI: Sharing IRQ 10 with 00:0e.0
[..]
---
So he did find the first two controllers.
I rebooted the machine after about 3 minutes to attach the drives to
ide2, but Linux didn't find the controllers.
---
Linux version 2.4.20-rc2-ac1 (root@pikelot) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Tue Nov 19 20:19:24 CET 2002
PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Scanning bus 00
Found 00:00 [1106/3099] 000600 00
Found 00:08 [1106/b099] 000604 01
Found 00:40 [5333/8811] 000300 00
Found 00:60 [10ec/8139] 000200 00
Found 00:70 [1103/0008] 000104 00
Found 00:71 [1103/0008] 000104 00
Found 00:88 [1106/3177] 000601 00
Found 00:89 [1106/0571] 000101 00
Found 00:8d [1106/3059] 000401 00
Found 00:90 [1106/3065] 000200 00
Fixups for bus 00
Scanning behind PCI bridge 00:01.0, config 010100, pass 0
Scanning bus 01
Fixups for bus 01
Bus scan for 01 returning with max=01
Scanning behind PCI bridge 00:01.0, config 010100, pass 1
Bus scan for 00 returning with max=01
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
PCI: Found IRQ 11 for device 00:08.0
PCI: Sharing IRQ 11 with 00:12.0
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT374: IDE controller at PCI slot 00:0e.0
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
HPT374: chipset revision 7
HPT374: not 100%% native mode: will probe irqs later
PCI: Found IRQ 10 for device 00:0e.1
PCI: Sharing IRQ 10 with 00:0e.0
---
So I removed the drives again, but the controllers are still undetected.
(Same dmesg excerpt as above)
I'm confused :-/
Karsten
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:29 EST